气固吸附等温线的研究进展

综述了近些年来在气固吸附理论研究领域对吸附等温线的研究进展。论述了从早期的BDDT的5种类型吸附等温线，到IUPAC的6种类型吸附等温线，再到基于Ono-kondo晶格模型的Gibbs吸附分类的5种类型吸附等温线．讨论了与各种类型吸附等温线类型相对应的吸附机理，并对滞留回环现象进行了解释和分析。     

超临界流体干燥过程的分析

以ZrOCl2•8H2O为原料，采用超临界流体干燥（SCFD）法，在短时间内制备出大孔体积高比表面ZrO2气凝胶超细粉．该法具有良好的稳定性和可靠性．建立了醇凝胶中液相含水量的分析方法，为产品质量控制及确认体系是否处于超临界状态提供了依据．对抽提后的溶剂分析表明，SCFD过程是一物理过程．对水的抽提干燥过程亦进行了初步的理论探讨．     

An Efficient and High‐Yield One‐Pot Synthesis of Bis(oxazoline)s

An efficient and mild one‐pot synthesis of bis(oxazoline) (BOX) ligands is developed from reactions of dicarboxy dichlorides with β‐amino alcohols in the presence of 11.0 equiv. NEt₃ followed by the addition of 3.6 equiv. methanesulfonyl chloride (MsCl). Nine different BOX ligands were prepared in excellent yields of ≥ 80%. Advantages of this improved synthesis are mild reaction conditions, short total reaction time of 9 h, and high isolated yields.     

Solventless injecction for packed column supercritical fluid chromatography

The adverse effects of injection solvent strength on microbore packed column SFC band broadening are demonstrated and a solventless injection system that eliminates these effects is introduced. The injection system removes solvent in a GC-like manner using a retention gap and an on-column capillary GC syringe. The analyte is delivered to the analytical column in a solvent-free plug of supercritical fluid mobile phase.     

Palladium-catalyzed cycloheptatriene formation by [3+2+2] cocyclization of 2-substituted allylic alcohols and alkynes

Cycloheptatrienes were obtained by the reaction of 2-substituted allylic alcohols with alkynes in the presence of catalytic amounts of palladium complexes and p-toluenesulfonic acid.     

A novel reaction of allylic alcohols with hexafluoropropene-diethylamine adduct (PPDA) to form 2-fluoro-2-trifluoromethyl-4-alkenamide

Treatment of allylic alcohols with hexafluoropropene-diethylamine adduct (PPDA) afforded N,N-diethyl-2-fluoro-2-trifluoromethyl-4-alkenamides which were formed by the Claisen rearrangement of intermediary 2-alkenyl-1-diethylamino-2,3,3,3-tetrafluoro-1-propenyl ethers. Although (E)-allylic alcohols gave two diastereomeric products in about 1:1 ratio, (Z)-allylic alcohols gave the corresponding product as a single diastereomer.     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001     

锌和锡参与下末端环氧化物的选择性烯丙基化反应

烯丙基溴和金属辛或锡成功地将末端环氧化合物1一锅法合成高烯丙基醇2和双高烯丙基醇3. 还研究了环氧化合物取代基的影响, 并提出了此烯丙基化的反应途径 .     

Molybdenum(VI)-complexes with chiral N,O-ligands derived from carbohydrates: synthesis, structure and catalytic properties in asymmetric olefin epoxidation

Novel chiral 2′-pyridinyl alcohols derived from isopropylidene-protected carbohydrates are reported. They show different characteristics at the hydroxy group, but are all suitable ligands for chiral molybdenum(VI) complexes of the type MoO₂L₂ (L = chiral 2′-pyridinyl alcoholate). MoO₂(acac)₂ served as starting material in the complex syntheses. The structure of one ligand and one dioxo complex were exemplary established by X-ray crystallography. For catalytic runs in the enantioselective epoxidation catalysis trans-methylstyrene was used as model substrate, tert-butylhydroperoxide and cumolhydroperoxide, resp., as the oxidant.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.