Study of radiation background at the north crossing point of the BEPCⅡ in collision mode

Understanding the radiation background at the north crossing point (NCP) in the tunnel of BEPCII is crucial for the performance safety of the High Purity Germanium (HPGe) detector, and in turn of great significance for long-term stable running of the energy measurement system. Therefore, as the first step, a NaI(Tl) detector is constructed to continuously measure the radiation level of photons as background for future experiments. Furthermore, gamma and neutron dosimeters are utilized to explore the radiation distribution in the vicinity of the NCP where the HPGe detector will be located. Synthesizing all obtained information, the shielding for neutron irradiation is studied based on model-dependent theoretical analysis.     

低能量阈高纯锗探测器用于暗物质探测实验研究

一个位于韩国江原道襄阳郡地下实验室的暗物质WIMP探测实验中, 采用了低能量阈高纯锗探测器, 带有碘化铯晶体反符合探测器作为主动屏蔽体. 整个系统设置和能量标定已经完成, 并且已经积累了约155d的本底数据. 还应用外置伽玛源和中子源进行了实验, 以判断本底的来源. 介绍了数据的分析和初步结果, 并给出了实验诱人的前景.     

ICP-AES快速测定土壤中硫含量

采用ICP-AES研究土壤中硫含量的测定.以王水消解土壤试样,优化全谱型ICP-AES分析条件测定土壤中S的含量,检出限为5.7ng/mL(180.7nm)和8.6ng/mL(182.0nm).测定土壤标准物质中的S含量,测定结果在标称值范围内,连续测定10个平行样其相对标准偏差均小于2%.方法快速、简单、准确.     

大口径轻型红外扫描镜技术的研究

分析了大口径轻型红外扫描镜国内研制的必要性。讨论了国内的研制方案。研究了关键技术的现状 ,并对未来发展进行了展望。     

Millimeter and submillimeter detection using Ga1?xAlxAs/GaAs heterostructures

We have shown that a Ga_1–xAl_xAs/GaAs heterostructure can be used as a sensitive tunable detector of mm-wave/sub-mm-wave radiation. The mechanism for detection requires the application of a magnetic field varying from approximately 0.2T at 94GHz (3.2mm wavelength) to 6.2T at 2500GHz (119m wavelength). The responsivity and N.E.P. at 3.2mm have been roughly estimated at 200V/W and 5×10^–11W/Hz respectively. The speed of such a detector could be several orders of magnitude greater than comparable InSb detectors.     

可用于激光核聚变的闪烁中子探测器

在当前激光核聚变实验中,中子集中在短时间内出现、且产额低。为适应这种特点,要求探测器的效率高,分辨时间短。利用闪烁中子探测器探测激光核聚变所产生的中子,能测定中子产额,记录中子能量,而且探测效率高,分辨时间短。缺点是易受γ射线、X射线的干扰。     

Plasma sprayed alumina coatings for radiation detector development

Conventional design of radiation detectors uses sintered ceramic insulating modules. The major drawback of these ceramic components is their inherent brittleness. Ion chambers, in which these ceramic spacers are replaced by metallic components with plasma spray coated alumina, have been developed in our Research Centre. These components act as thin spacers that have good mechanical strength as well as high electrical insulation and replace alumina insulators with the same dimensions. As a result, the design of the beam loss monitor ion chamber for CAT could be simplified by coating the outer surface of the HT electrode with alumina. One of the chambers developed for isotope calibrator for brachytherapy gamma sources has its outer aluminium electrode (60 mm dia × 220 mm long) coated with 250 μ thick alumina (97%) + titania (3%). In view of potential applications in neutron-sensitive ion chambers used in reactor control instrumentation, studies were carried out on alumina 100 μ to 500 μ thick coatings on copper, aluminium and SS components. The electrical insulation varied from 10⁸ ohms to 10¹² ohms for coating thicknesses above 200 μ. The porosity in the coating resulted in some fall in electrical insulation due to moisture absorption. An improvement could be achieved by providing the ceramic surface with moisture-repellent silicone oil coating. Irradiation at Apsara reactor core location showed that the coating on aluminium was found to be unaffected after exposure to 10¹⁷ nvt fluence.     

微通道板X射线探测器

在激光等离子体实验研究中,为了更好地了解激光与等离子体相互作用过程中所发生的物理过程,要求能够高时间分辨地观测等离子体所辐射的X射线的特征。测量的关键在于X射线探测元件,既要有快的时间响应,又要能够输出足够大的光电流,以便直接驱动高速示波器,进行显示和照像。普通的闪烁体/光电倍增管X射线探测器,由于闪烁体荧光有着固有的衰减时间,以及普通的光电倍增管中的电子飞行时间离散严重,时间分辨力难以提高。     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

HIRFL-CSRm内靶实验终端CsI(Tl)电磁量能器性能模拟

基于GEANT4模拟了HIRFL CSRm内靶实验终端的CsI(Tl)电磁量能器系统,给出了CsI电磁量能器的最佳设计参数及可能达到的性能.结果表明,设计的CsI(Tl)电磁量能器系统能够满足所研究的物理要求. Based on the GEANT4, the performance of the electromagnetic calorimeter (EMC) of the internal-target detector at HIRFL-CSRm is simulated. The simulation results show that 1.5%—3% of the energy resolution σ_E/E and 2° of the polar angular resolution σ_θ can be obtained. The invariant mass of the π~0 decay can be reconstructed well. The performance can meet the requirement of studying the proposed physics at HIRFL-CSRm.