Fluorinated Vinyl Sulfonium Salts and Their Synthetic Utilization

The fluorinated building block strategy and the direct fluorination strategy are of great importance for the synthesis of new fluorinated molecules. These strategies complement each other and can be combined to develop a new methodology for the construction of a wide variety of fascinating organofluorine compounds. In our opinion, the versatile building blocks used in this method should satisfy the following conditions: 1) readily prepared from commercially available reagents; 2) easy to handle; 3) storage under ordinary conditions without noticeable decomposition; 4) wide applicability. Based on the aforementioned requirements, we focused on the use of vinyl sulfonium salts. This brief review describes the synthesis of five types of fluorinated vinyl sulfonium salts and their reactions. Especially, we featured typical fluorinated groups containing trifluoromethyl (CF₃), difluoromethyl (CF₂H), monofluoromethyl (CFH₂), monofluoro (F) or β-bromotetrafluoroethyl (BrCF₂CF₂) moieties in combination with vinyl sulfonium salts.     

Synthesis and NMR Study of α‐Keto Stabilized Ylides of the Type RCOCH=PAr3, (R=MeO‐C6H4, Cl‐C6H4, NO2‐C6H4, α‐Thiophenyl and Naphthyl; Ar = p‐Tolyl or Phenyl)

Synthesis and characterization of five new phosphonium salts and related phosphorus ylides of the type R‐COCH=PAr₃ are reported. The reaction of bromo 4′‐methoxo/chloro/nitro acetophenone, α‐thiophenyl and naphthoyl acetophenone with triphenylphosphine or triparatolylphosphine in acetone gives phosphonium salts. Dehydrogenation of these salts in aqueous sodium hydroxide solution form ylides. Characterization of obtained compounds was performed by IR, ¹H, ¹³C, ³¹PNMR and elemental analysis.     

Electrochemically produced responsive hydrogel films: influence of added salt on thickness and morphology

We report on electrochemically prepared hydrogel layers of poly-N-isopropylacrylamide (pNIPAm) and on the influence that the supporting electrolyte has on their thickness and morphology. Ions that are destabilizing in the Hofmeister sense increase the thickness. The effect correlates well with the ion's tendency to lower the lower critical solution temperature (LCST) of pNIPAm films. AFM micrographs show small-scale globules. When the films were produced in the presence of a destabilizing salt (such as ammonium sulfate) one also observes larger features, resembling wrinkles. We attribute the globules to nucleated growth of surface-attached microgels, whereas the wrinkles presumably are produced by the collapse of hydrogen bubbles underneath a well-crosslinked film. Adding a chain transfer agent to the reactant solution reduces the lateral heterogeneities.     

N-Functionalised heterocyclic dicarbene complexes of silver: Synthesis and structural studies

A range of new diimidazolium salts, held together by an alkyl unit and bearing alcohol pendant arms on their nitrogen, was synthesized. A short modular reaction pathway leads to the N-heterocyclic carbene (NHC) precursors, differing by the flexibility of the bridge, the steric bulk of substituents in α-position of the OH groups and the anions. Treatment of diimidazolium salts with Ag₂O yields Ag^I(carbene)₂ complexes. The related trimethylene-bridged bis-NHC silver complexes 6 and 7 were crystallised with di-tosylate and di-hexafluorophosphate anions, respectively. Their X-ray structures revealed dimeric species, involving two ligands with different arrangements around the Ag cations, leading to crossed and parallel conformations.     

HPLC–ELSD法测定三乙醇胺单、双、三酯季铵盐的含量

建立正相高效液相色谱–蒸发光散射检测法测定工业样品中的三乙醇胺单、双、三酯季铵盐的含量。以正己烷–甲醇–四氢呋喃(体积比85∶10∶5,加0.5 mL三氟乙酸调节至pH 3.50)为流动相,等度洗脱三乙醇胺单、双、三酯季铵盐,色谱柱为HP–氨基正相柱,柱温27℃,流量1.0 mL/min,蒸发光散射检测器漂移管温度80℃,载气流量2.6 L/min。三乙醇胺单、双、三季铵盐质量浓度的自然对数与各自对应的色谱峰面积和的自然对数呈良好的线性,相关系数(r~2)分别为0.991 4,0.996 7,0.991 5。测定结果的相对标准偏差为0.6%~2.6%(n=6),加标回收率分别为98.6%,101.2%,97.9%。该方法准确快速,可以为三乙醇胺单、双、三酯季铵盐的生产工艺优化提供理论数据。     

采用稀释成盐法从富硼浓缩盐卤中合成的镁硼酸盐化合物及其结构与性质

通过稀释成盐法在富硼浓缩盐卤体系Na-K-Mg-Cl-SO₄中合成了一种新的六硼酸镁Mg[B₆O₇(OH)₆]·5H₂O化合物。根据X射线粉末衍射数据对其晶体结构进行了精修,并采用红外及拉曼光谱法对其结构进行了表征,分析了其光谱及结构特征。结果表明,该化合物由1个Mg原子、1个B₆O₇(OH)₆基团和5个H₂O分子构成,Mg原子以六配位形式与氧结合形成畸变MgO₆八面体构型;热重分析表明,高温分解过程该化合物脱水转化为四硼酸镁MgB₄O₇;通过紫外可见漫反射法求得其禁带宽度为4.44 eV。     

Molecular Dynamics Simulation of Sulfobetaine-Type Zwitterionic Surfactants at the Decane/Water Interface: Structure,Interfacial Properties

Molecular dynamics simulations of interfacial properties of new sulfobetaine-type zwitterionic surfactants were performed using a united atomistic model, and a detailed analysis of hydrophilicity, temperature sensitivity, and salt resistance of surfactants was carried out. The new model was parameterized to reproduce the density and showed good agreement with experimental values. The results showed that the surfactant will not cease to be effective with the increase of the temperature from 300 to 373 K but as it rises, the interfacial tension will have a reduction. This kind of surfactant can be proved to remain an activity at high concentration of monovalent and divalent cations. It has commendable salt tolerance.     

2-炔基苯胺与二芳基碘鎓盐的选择性芳基化/环化串联反应

有机高价碘试剂是一类环境友好、制备简单且性质温和的有机合成新试剂。近年来,有机高价碘试剂因表现出新颖、独特的反应性能而受到化学工作者广泛关注,成为有机合成重要研究领域之一。二芳基碘鎓盐是有机高价碘试剂的一个重要组成部分,是一类具有较高普适性的芳基化试剂,可用于羰基化合物、烯烃、炔烃和杂原子亲核化合物等的芳基化反应。目前,二芳基碘鎓盐作为芳基化试剂对具有单一芳基化位点化合物的芳基化已经有了非常广泛而深入的研究。对于具有两个甚至多个芳基化位点的化合物(如同时具有胺基和炔基),其芳基化选择性问题仍缺乏系统研究。特别是在多个芳基化位点共存时如何能够使芳基化发生在某一特定位点仍然是一大难题。这限制了二芳基碘鎓盐作为芳基化试剂更广泛的应用。因此,我们选用2-炔基苯胺(含有胺基和炔基两个芳基化位点)作为原料,通过溶剂的选择以及溶液酸碱性的调控来改变不同芳基化位点的反应活性,通过催化剂的调变来改变二芳基碘鎓盐芳基化反应的能力,从而找出最优条件实现底物分子的选择性芳基化反应,并利用剩余活性位点实现分子内的环化反应,从而实现芳基化-环化串联反应合成一系列N-芳基吲哚类化合物。在对模型底物进行条件筛选实验时发现,以2-乙基辛酸铜(Cu(OCOC8H17)2)作催化剂,二异丙基乙基胺(DIPEA)作碱,1,2-二氯乙烷(DCE)为溶剂,反应以最高93%的收率得到1,2-二苯基吲哚。使用该最优反应条件,一系列2-炔基苯胺都能与二芳基碘鎓盐很好地发生反应并且以良好到优秀的产率(71%–98%)得到目标产物N-芳基吲哚。此外,2-炔基苯胺与非对称的二芳基碘鎓盐也能发生反应,实验结果证明为位阻较小的芳基对胺基进行了N-芳基化反应。通过空白实验和对比实验,我们提出了可能的反应机理：二芳基碘鎓盐在铜催化剂作用下转化为亲电性的芳基活性中间体,该中间体与底物的胺基发生芳基化反应,然后芳基化产物在铜催化剂作用下环化生成N-芳基吲哚。该反应很好地解决了同时具有胺基和炔基两个芳基化位点的底物与二芳基碘鎓盐反应时C-芳基化和N-芳基化的竞争问题,选择合适反应条件使N-芳基化反应优先进行,为二芳基碘鎓盐的选择性芳基化反应提供了很好的实例,并为其它具有多个芳基化位点化合物的选择性芳基化反应提供了途径。     

Poly(4-styrenesulfonate) templated polyaniline-carboxymethyl cellulose blend: Morphology and surface resistivity of the spin-coated films

Poly (4-styrenesulfonate) (PSS) templated polyaniline-carboxymethyl cellulose blend forming stable aqueous colloidal suspensions was prepared through simple synthesis. Morphology of the spin-coated films obtained from different concentrations of colloidal suspensions was studied through atomic force microscopy (AFM). The AFM images were found to be drastically altered at lower concentrations showing a regular network-like structure. Room-temperature surface resistivity for the network featured spin-coated film showed semiconducting behavior. This indicates the efficacy of dilution as a new design element for network structures, further exhibiting resistivity.