利用密度反馈实现离子源长脉冲放电

介绍了等离子体密度对离子源放电的影响,为了获得长脉冲放电,采用朗缪尔探针测量等离子体密度并反馈调节离子源放电。基于朗缪尔探针测量,设计了控制部分硬件与软件构架,建立了离子源等离子体密度反馈控制系统,并成功地应用于离子源等离子体放电实验,通过反馈调节实验进气,得到了长达4.5 s的长脉冲放电,为中性束注入稳态运行提供了依据。     

Formation of the intermediate semiconductor larger for the Ohmic contact to silicon carbide using Germanium implantation

By formation of an intermediate semiconductor layer (ISL) with a narrow band gap at the metallic contact/SiC interface, this paper realises a new method to fabricate the low-resistance Ohmic contacts for SiC. An array of transfer length method (TLM) test patterns is formed on N-wells created by P⁺ ion implantation into Si-faced p-type 4H-SiC epilayer. The ISL of nickel-metal Ohmic contacts to n-type 4H-SiC could be formed by using Germanium ion implantation into SiC. The specific contact resistance ρ_c as low as 4.23× 10^-5~Ωega \cdotcm² is achieved after annealing in N₂ at 800~°C for 3~min, which is much lower than that (>900~°C) in the typical SiC metallisation process. The sheet resistance R_sh of the implanted layers is 1.5~kΩega /\Box. The technique for converting photoresist into nanocrystalline graphite is used to protect the SiC surface in the annealing after Ge⁺ ion implantations.     

Soft X‐ray characterization technique for Li batteries under operating conditions

O K‐edge and Co L‐edge near‐edge X‐ray absorption fine structure has been used to examine the cathode of an intact solid‐state lithium ion battery. The novel technique allowed for the simultaneous acquisition of partial electron yield and fluorescence yield data during the first charge cycle of a LiCoO₂‐based battery below the intercalation voltage. The chemical environments of oxygen and cobalt at the surface are shown to differ chemically from those in the bulk. The present design enables a wide variety of in situ spectroscopies, microscopies and scattering techniques.     

254 nm低通滤光片的研制

根据紫外光学系统的设计要求,在K9基底上研制了254 nm高反射率、可见光谱区高透过率的低通滤光片.根据膜系设计理论,通过针法优化,获得了干涉型低通滤光片的膜系;对电子束蒸镀HfO_2和MgF_2材料进行了研究,解决了材料喷溅的问题,减少了薄膜的吸收;采用考夫曼离子源,通过优化工艺参数,提高膜层致密性,解决了光谱曲线漂移的问题,改善了成膜质量.     

Enrichment of Lithium,Potassium, Copper,and Uranium Isotopes by Electromigration in a Cation Exchange Membrane

The ion exchange membrane can be used as an effective medium of electromigration for the separation of isotopes by the following reasons.     

有机物模板合成磷酸铝

用3种模板采用固相合成方法,以氯化铝和磷酸二氢铵为原料合成了磷酸铝,产物经XRD,IR,化学分析和ICPS表征。实验结果表明它们对金属铬离子具有良好的吸附性能。     

Effect of silver doping on the structure and phase separation of sulfur-rich As–S glasses: Raman and SEM studies

We report on the structural details and microphase separation of the bulk glasses Ag_x·(As₃₃S₆₇)_100-x for 0x25. Glass–glass phase separation occurs over a wide range of Ag content, i.e. 4x20. An off-resonant polarized Raman spectroscopic study has been carried out to elucidate structural aspects at the short- and medium-range structural order of the glasses. Analysis of Raman spectra revealed quantitative changes of the sulfur-rich microenvironments that reduce upon adding Ag. Scanning electron microscopy combined with X-rays microanalysis have been utilized to examine the type and extent of phase separation, and to provide quantitative details on the atomic concentrations in the Ag-poor and Ag-rich phases. It has been shown that at 7 at.% Ag the Ag-rich phase percolates through the structure; this effect can be associated with an ionic-to-superionic behavior of these glasses in accordance with similar studies on the stoichiometric arsenic sulfide glass; although the phase separation observed in the present glasses is qualitatively different.     

Improving the properties of HDPE based separators for lithium ion batteries by blending block with copolymer PE-b-PEG

To improve the performances of HDPE-based separators, polyether chains were incorporated into HDPE membranes by blending with poly(ethylene-block-ethylene glycol) (PE-b-PEG) via thermally induced phase separation (TIPS) process. By measuring the composition, morphology, crystallinity, ion conductivity, etc, the influence of PE-b-PEG on structures and properties of the blend separator were investigated. It was found that the incorporated PEG chains yielded higher surface energy for HDPE separator and improved affinity to liquid electrolyte. Thus, the stability of liquid electrolyte trapped in separator was increased while the interfacial resistance between separator and electrode was reduced effectively. The ionic conductivity of liquid electrolyte soaked separator could reach 1.28 × 10-3 S.cm-1 at 25℃, and the electrochemical stability window was up to 4.5 V (versus Li + /Li). These results revealed that blending PE-b-PEG into porous HDPE membranes could efficiently improve the performances of PE separators for lithium batteries.     

Adsorption-energetic and IR spectroscopic studies of NH4 natrolite

The ammonium form of natural zeolite, natrolite, obtained by vapor phase ion exchange is similar to calcium-containing zeolites of the natrolite group in its de- and rehydration characteristics and the heats of immersion in water. The adsorption capacity and the heat of immersion in water are maximum after evacuation of the zeolite at 200 °C. The irreversible sintering of NH₄ natrolite occurs above 200 °C (up to 45% at 500 °C), accompanied by the formation of hydroxyl groups. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 359–361, February, 1998.