Relationship between selectivity and average resolution in comprehensive two-dimensional separations with spectroscopic detection

The average value of the multivariate selectivity (SEL) of randomly positioned peaks in a multi-component separation is shown to equal the average fraction of peaks that are singlets, as predicted by statistical-overlap theory (SOT). This equality is the basis for proposing a useful metric, specifically the average minimum resolution of nearest-neighbor peaks, for the performance of comprehensive two-dimensional (2D) separations. Furthermore this metric was computed both without ancillary spectroscopic information and with the assistance of such help, specifically multi-wavelength UV-vis spectra, acquired during the separation. Separations are simulated with randomly positioned peaks over wide ranges of total number of peaks, first- and second-dimension peak capacity, dimensionless first-dimension sampling time, and spectral diversity. The specific version of the general multivariate selectivity concept that is used here--identified as SEL--gives the relative precision of quantification when using the PARAFAC (parallel factor analysis) method, a popular curve resolution algorithm. The SEL values of all peaks were calculated, averaged, and compared to the predictions of SOT. In the absence of auxiliary spectral data, the SEL-based average minimum resolution required to separate two peaks in a 2D separation is 0.256, compared to resolution of 0.5 if no chemometric assistance is available. This was found to be valid over a wide range of conditions and is essentially independent of peak crowding. With the assistance of the spectral data, the requisite minimum resolution substantially improves, that is, it decreases, especially when peak crowding is severe. The requisite minimum resolution decreases even further, up to a limit, as the spectral diversity is increased. In contrast, the SEL-based average under-sampling correction factor is virtually independent of the presence of the additional spectral data, and additionally is about the same as calculated with SOT from the average number of maxima in closely analogous simulations. The use of selectivity greatly increases the fraction of peaks that are singlets, relative to the number of singlet maxima, especially when spectral assistance is added. The insensitivity of the under-sampling correction factor to either the use of selectivity or added spectral data simplifies optimization of the corrected peak capacity in on-line comprehensive 2D separations.     

Synthesis, physical studies and uptake behavior of: copper(II) and lead(II) by Schiff base chelating resins

Two new chelating resins possessing multiple functional groups capable of coordinating with several metal ions are reported. The resins were synthesized by condensing Schiff bases derived from 2-aminophenol, 2-hydroxy-5-chloroaniline and terephthaldehyde with formaldehyde in an alkaline medium. The effects of pH and contact time of the Cu(2+) and Pb(2+) in aqueous solutions on the uptake behavior of the resins were studied. The metal ion uptake behavior of the resins was investigated by the batch method. Both the uptake and the selectivity of the resins towards the investigated metal ions were related to the structure of the resins, type of the metal ion and the uptake conditions. The resins showed maximum uptake capacity for Cu(2+) and Pb(2+) at pH 10. Cu(2+) was seen to undergo preferential adsorption in separate and mixture solutions of Cu(2+) and Pb(2+). Kinetic studies for the resins using Langmiur equation were also performed. The Schiff base monomers and their formaldehyde resins were characterized by elemental analyses, FTIR and (1)H NMR spectroscopy. The thermal stability of the resins was studied using TGA/DTG analysis.     

A theoretical study of the regio- and stereoselectivities of non-polar 1,3-dipolar cycloaddition reaction between C-diethoxyphosphoryl-N-methylnitrone and N-(2-fluorophenyl)acrylamide

The 1,3-dipolar cycloadditions (13DC) of C-diethoxyphosphoryl-N-methylnitrone and N-(2-fluorophenyl) acrylamide have been studied using density functional theory (DFT) calculations at B3LYP/6-31G(d) level of theory. Our calculations show that this 13DC reaction takes place with complete ortho regioselectivity with endo stereoselectivity, which favours kinetically the formation of the ortho–endo cycloadduct, in agreement with the experimental observations. The inclusion of solvent effects does not modify the gas-phase selectivities but slightly decreases the reactivity of the reagents. Analysis of the bond order and charge transfer at the transition states indicates that this 13DC reaction takes place via a one-step asynchronous mechanism. Analysis of the DFT global reactivity indices and the Parr functions of the reagents allow us to provide an explanation of the regioselectivity of this 13DC reaction.     

Study of the Selectivity of SnO2 Supported Membranes Prepared by a Sol-Gel Route

In this work the sol-gel process was used to prepare SnO2 supported membranes with an average pore size of 2.5 nm. The effects of salt concentration (NaCl or CaCl2) and of the pH of the aqueous solutions used on the flux and selectivity through the SnO2 membrane were analyzed by permeation experiments and the results interpreted taking account of the zeta potential values determined from the electrophoretic mobility of the SnO2 powder aqueous dispersion. The results show that the ion flux (Na+, Ca2+ and Cl–) throughout the membrane is determined by the electrostatic repulsion among these species and the surface charge at the tin oxide-solution interface.     

The chemistry of phase selectivity in the synthesis of high-silica zeolites

In this review we discuss the roles that inorganic and organic components play in the synthesis of high-silica zeolites. We discuss the effects that heteroatom identity, heteroatom substitution, and SDA shape have on synthesis products. Then we summarize recent developments in zeolite synthesis that have been made by performing syntheses in concentrated fluoride media and by using germanium as a tetravalent heteroatom. Finally, we examine the combined roles that framework stability, framework/SDA interactions, and silanol defects may have in determining phase selectivity.     

Mode selectivity of multisegment composite-cavity semiconductor lasers

The single longitudinal mode (SLM) characteristics of narrow linewidth long-external-cavity semiconductor lasers has been improved significantly by using a multisegment composite-cavity configuration. In this paper, the mode selectivities of two-segment, three-segment and four-segment cavity semiconductor lasers have been analysed and compared. In experiments, a four-segment composite cavity laser exhibits SLM oscillation with side-mode suppression ratio of 30 dB even for total external cavity length of 75 cm. The oscillation linewidth is less than 200 kHz.     

Selective catalysts for the production of nitrogen-containing compounds

Herewith are the two processes developed by Nitto, which produce N-containing compounds such as hydrogen cyanide and methylamines. These processes are characterized by unique selective catalysts: an Fe–Sb–O based fluid-bed catalyst for ammoxidation of methanol and a shape-selective zeolite catalyst for ammonolysis of methanol.     

Substrates for the at-line coupling of capillary electrophoresis and surface-enhanced Raman spectroscopy

In this preliminary study, we evaluated four different types of substrate for the at-line coupling of capillary electrophoresis and surface-enhanced (resonance) Raman spectroscopy, CE-SER(R)S, with emphasis on spectral repeatability. We tested Sub1: etched silver foil, Sub2: a vapour-deposited silver film, Sub3: a silver oxalate-precoated silica TLC plate and Sub4: a silica TLC plate on which colloid and poly(l-lysine) were manually added to the analyte spots, used earlier in at-line CE-SE(R)RS. All substrates were first tested by manual spotting using trans-1,2-bis(4-pyridyl)ethylene (BPE) as a model compound for SERS and crystal violet (CV) as a model compound for SE(R)RS. The spectral features of the SE(R)RS spectra of BPE and CV showed a most satisfactory repeatability on all substrates. As expected, the signal intensities varied considerably between runs; this implies that quantification in at-line CE-SE(R)RS should rather be done by means of an on-line absorbance detector. In addition, the suitability of Sub1, Sub2 and Sub4 as deposition substrates after CE was explored using two cationic dyes: CV and basic fuchsin (BF). Good-quality SERRS spectra could be recorded on all three substrates. Although Sub1 and Sub2 have a poor water-sorptivity, they were found to be good substrates for at-line CE-SERRS. They do not require any post-deposition addition of silver colloid and could therefore become attractive alternatives for Sub4.     

A High-Resolution Laser Setup for Determining Nuclear Moments

A laser spectroscopic setup has been applied in the past to successfully investigate off-line the hyperfine structure splitting of radionuclides. In the present paper, its modification is described which will enable the determination of nuclear magnetic dipole and electric quadrupole moments with higher sensitivity and higher resolution.     

Studies on the Selectivity of Porous Polymers Containing Different Functional Groups

Three types of porous polymers containing different functional groups were synthesized as stationary phases for gas chromatography. The influence of functional groups in the copolymer skeletons on their selectivities was studied. To determine the selectivities of these copolymers, two procedures were applied: the selectivity triangle and the general selectivity. As a reference phase Porapak Q which does not contain any functional groups was used.