Improved Calcium Ion-Selective Electrode Based on a Neutral Carrier

Abstract

The performance of a liquid-membrane electrode using a synthetic, neutral carrier in o-nitro-phenyl-n-octyl-ether as membrane component in a PVC matrix, in the presence of sodium tetra-phenyl-borate, is described. Selectivities, working range, lifetime and anion interference are discussed. The electrode makes possible the measurement of calcium ion activities in the range 10^?1M to 10^?6M in unbuffered and in the range 10^?1M to 10^?8M in calcium buffered systems respectively. The selectivities of calcium over protons, magnesium, sodium and zinc are 25,000, 26,000, 2,800 and 7,100, respectively, and are far superior than those reported for other calcium sensors.     

多羰基甾酮的选择性还原反应研究

在不同金属离子存在下,多羰基甾酮的甾核及支链上都发生了羰基与硼氢化钠的还原反应,得到具有不同的区域选择性和立体选择性的还原产物.     

Cu-Ni-Zn三元脂肪醇胺化催化剂的研究

 长链烷基二甲基叔胺是一类重要的有机中间体,目前其主要的制备工艺是由脂肪醇和二甲胺在脱氢－加氢类催化剂的作用下进行胺化反应．改进脂肪醇胺化催化剂的主要目标是提高其选择性．对以Cu和Ni为活性组分,以碳酸钙为载体的催化剂体系中加入Zn助催化剂组分对催化剂选择性的影响进行了研究．结果发现,在相同Cu／Ni比的条件下,Zn在Cu－Ni催化剂体系中的一个主要作用是能够阻碍氧化态镍的还原,而催化剂的选择性与催化剂中镍的还原程度密切相关．     

固态有机合成反应进展

以绿色合成为主题，综述了近期固相有机合成研究方面的一些新进展和典型反 应类型。由于固相反应的特征，多数固相有机反应表现出较溶液中更高的反应效率 和更好的选择性，并讨论了固态反应中的分子运动及其固态反应的因素。     

3D Metal–Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis,Crystal Structures,Gas Adsorption,and Magnetic Properties

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2′-bithiophen-5,5′-dicarboxylate (btdc²⁻) [Co₃(btdc)₃(bpy)₂]·4DMF, 1; [Co₃(btdc)₃(pz)(dmf)₂]·4DMF·1.5H₂O, 2; [Co₃(btdc)₃(dmf)₄]∙2DMF∙2H₂O, 3 (bpy = 2,2′-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co₃(RCOO)₆}, connected either by btdc^2– ligands (1, 3) or by both btdc^2– and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N₂, O₂, CO, CO₂, CH₄ adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m²⋅g⁻¹ and promising gas separation performance with selectivity factors up to 35.7 for CO₂/N₂, 45.4 for CO₂/O₂, 20.8 for CO₂/CO, and 4.8 for CO₂/CH₄. The molar magnetic susceptibilities χ_p(T) were measured for 1 and 2 in the temperature range 1.77–330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are μ_eff (300 K) ≈ 4.93 μ_B. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

高分散Ru/FeOx催化剂在二氧化碳选择加氢反应中的应用及其催化活性的调控

由于化石能源的大量开采和利用造成CO2过度排放,从而导致严重的温室效应和气候环境问题,给人类生存带来极大威胁.CO2选择加氢反应可以将CO2催化加氢生成高附加值的CO产物.与其他的CO2转化反应策略相比,该过程中H2的消耗更少,成为可有效处理及转化CO2的手段之一.同时,应尽可能抑制CO2深度加氢以及甲烷的产生,研制及设计具有高CO选择性的新型高效催化剂及其构效关系的分析仍十分重要.据报道,负载型贵金属基催化剂的使用有利于H2分子的活化,具有优异的催化活性,因而广泛应用于多种催化反应中.然而,贵金属催化剂实现工业应用的最大挑战是资源的限制及其高额的成本.近年来,由贵金属制备的负载型亚纳米团簇受到广泛关注,主要包括如Au,Pt,Pd,Ru等贵金属,可有效应用于多相催化反应.人们还致力于提高负载型亚纳米团簇的分散度,促进催化剂活性位点的有效暴露,有利于大幅度提高催化剂的有效利用率.本文采用共沉淀法成功制备了超高分散的负载型Ru基催化剂,通过CO2选择加氢-程序升温表面反应(TPSR)和质谱联用技术测试了催化剂性能,发现CO2加氢反应生成CO选择性达100%.采用XRD,BET和TEM等方法对催化剂结构进行表征,并结合H2-TPR,H2-TPD和XPS等表征结果深入探讨了催化剂构效关系,并提出了针对该催化剂体系较为合理的反应模型.在CO2选择加氢反应的催化性能测试中,2.50%Ru/FeOx催化剂对目标产物CO选择性仅为41%; 随着Ru负载量降低至0.25%和0.1%时,CO选择性明显提高至80%; 当进一步降低Ru含量至0.01%时,CO选择性接近100%,且表现出优异的反应速率.在360 oC时,0.01%Ru/FeOx催化剂的相对反应速率为7.71 molCO2molRu-1 min-1,是2.50%Ru/FeOx催化剂相对反应速率的154倍.H2-TPR结果表明,贵金属Ru可以明显促进载体FeOx的还原,并产生丰富的氧空位,进而促进CO2的吸附、活化.而且CO2选择加氢TPSR结果显示,目标产物CO的起始生成温度总是滞后于原料H2的初始活化温度,与H2-TPR结果及文献报道的CO2选择加氢反应机理一致.通过H2-TPD深入理解H2在催化剂表面的活化和氢溢流现象,以及Hads与不同催化剂之间的相互作用力,0.01%Ru/FeOx催化剂相对较高的H2脱附峰温度表明,该样品中Ru与Hads具有极强的相互作用力,相对抑制了Hads与COads深入加氢生成CH4,从而提高了CO选择性,而2.50%Ru/FeOx催化剂的情况则与此相反.本文提出了从Hads吸附作用力强弱来考虑CO2选择加氢反应选择性的新思路,同时为设计CO2选择加氢制高附加值CO的高催化反应速率、高CO选择性的高分散Ru基催化剂提供了一种经济简易的催化剂设计思路.     

三维有序金掺杂纳米TiO_2修饰电极用于抗肿瘤药物与DNA相互作用的研究

利用模板法在氧化铟锡(ITO)电极表面制备了三维有序多孔结构的金掺杂纳米Ti O2薄膜修饰电极(3DOM GTD/ITO),并在此修饰电极上成功固定小牛胸腺DNA(ct DNA),从而构建了一种新型的DNA生物传感器(DNA/3DOM GTD/ITO),并通过透射电镜(TEM)、扫描电镜(SEM)对修饰电极的表面形貌进行表征。采用电化学交流阻抗(EIS)法研究了ct DNA在3DOM GTD/ITO修饰电极表面的固定情况,结果表明,ct DNA已被成功地固定在3DOM GTD/ITO修饰电极表面。采用循环伏安法、微分脉冲伏安法等电化学方法研究了抗肿瘤药物槲皮素(Qu)在3DOM GTD/ITO修饰电极表面的电化学性质及与ct DNA的相互作用。结果表明,Qu在3DOM GTD/ITO修饰电极表面有1对准可逆的氧化还原峰,其氧化还原反应为2电子和2质子的转移过程。Qu可与固定在修饰电极上的ct DNA发生较强的结合作用,其结合常数(K)为3.61×106L/mol。循环伏安实验、紫外-可见吸收光谱、分子荧光光谱、圆二色性光谱均表明Qu与ct DNA之间的相互作用模式为嵌插作用。Qu与ct DNA的碱基结合具有序列选择性,对Qu与聚(d G-d C)及聚(d A-d T)的结合常数进行计算,得到结合常数比K(d G-d C)/K(d A-d T)=3.5,表明Qu与ct DNA发生嵌插作用时更倾向于结合在GC富集区域。     

不同结构的分子筛在1-丁烯中催化裂解性能的研究

我们合成了不同Si含量的SAPO-18,并且利用了XRD、SEM、NH3-TPD进行了表征分析.利用微反固定床反应器评价了代表不同结构的H-ZSM-5(MFI)、H-Beta(* BEA)、SAPO-18 (AEI)系列分子筛的丁烯催化裂解性能.实验结果表明分子筛的结构和酸性对反应结果都有明显影响,分子筛酸量的增加提高了1-丁烯的转化率,但酸量过高会引发氢转移、芳构化副反应,从而降低丙烯的选择性;分子筛孔口大小、孔道结构决定了可以获得的最高丙烯选择性.具有八元环孔口、笼形结构特点的SAPO-18-0.8在线时间20 min时1-丁烯裂解中转化率为60.7％,获得的丙烯选择性达到59.1％.