Y2O3薄膜处理对3Cr25Ni7N合金的抗高温氧化性能的影响

采用电沉积-热解法在3Cr25Ni7N合金表面制备了Y2O3薄膜,并研究了薄膜处理对合金在1000℃空气中的抗高温氧化性能的影响。氧化动力学曲线、SEM及XRD分析结果表明,Y2O3薄膜处理使合金表面氧化膜以尖晶石结构为主,氧化膜致密,有效地抑制了Cr2O3的挥发反应,且氧化膜与基体的附着性好,因此合金在高温下的抗氧化性能得到提高,这与氧化钇薄膜在较低温度下抗高温氧化性能提高的机制是不同的。在不同温度下,Y2O3薄膜处理均可以有效提高合金的抗高温氧化性能。     

Photocatalytic Oxidation of Aniline in the Gas Phase Using Porous TiO2 Thin Films

The gas-phase photocatalytic oxidation of aniline on a new kind of porous nano-TiO₂ composite films is investigated. The composite film was prepared on glass fiber with the water glass as binders and dilute H₂SO₄ solution as solidifying reagent. The surface characters were observed by scanning electron microscope. The photocatalytic degradation of aniline on the composite films was carried out in a TiO₂/UV system. Some important factors affecting the photodegradation, such as the concentration of TiO₂, the initial concentration of aniline, and the existing water vapor, are also studied. The product of photocatalytic oxidation was detected by Fourier transform-Infrared. The partial intermediate products were absorbed on TiO₂ surface, which resulted in catalyst deactivation. But when it was irradiated under UV illumination or solar irradiation for some time, the catalyst could be reused without loss of catalytic activity. Translated from the Journal of Wuhan University (Natural Science Edition), 2005, 51(2) (in Chinese)     

Highly efficient Wacker oxidation catalyzed by heterogeneous Pd montmorillonite under acid-free conditions

Palladium-montmorillonite was proven to be highly efficient for the Wacker oxidation of terminal olefins to the corresponding methyl ketones. The catalyst was reusable while maintaining high activity and selectivity.     

超临界二氧化碳介质中钯催化炔烃羰基化反应

研究了以超临界二氧化碳为反应介质实现改善钯催化炔烃羰基化反应绿色性的方法 .研究结果表明 :醇的用量、二氧化碳压力和反应温度等因素均对钯催化炔烃羰基化反应的化学选择性均有影响 ,即存在炔烃的羰基化反应与氧化偶合反应的竞争     

SYNTHESIS AND CATALYTIC PROPERTY OF POLYSTYRENE SUPPORTED PHENYLALANINE SCHIFF BASE COMPLEX OF Mn（Ⅱ） IN AEROBIC OXIDATION OF CYCLOHEXENE

The polystyrene supported phenylalanine Schiff base complex of Mn(Ⅱ)(PS-Sal-Phe-Mn)was prepared with chloromethylated styrene polymer beads, 2,4-dihydroxybenzaldehyde,L-phenylalanine and manganese(Ⅱ)acetate tetrahyrate., The polymeric ligand and the complex were characterized by FT-IR,, small area X-ray photoelectron spectroscopy(XPS), and ICP-AES. In the presence of the manganese complex, cyclohexene(1)was effectively oxidized by molecular oxygen without reductant. The major products of the reaction were 2-cyclohexen-1-ol(2),2-cyclohexen-1-one(3)and 2-cyclohexen-1- hydroperoxide(4), which was different with typical oxidation of cyclohexene. The influence of reaction temperature and additive for oxidation had been studied. The selectivity of 2-cyclohexen-l-hydroperoxide varied with reaction time and different additives. The mechanism of cyclohexene oxidation had also been discussed.     

ToF‐SIMS studies of the oxidation of Fe by D2O vapour: comparison with XPS

The oxidation of iron (Fe) by water (D₂O) vapour at low pressures and room temperature was investigated using time‐of‐flight (ToF) SIMS. The results supported those found previously using XPS and the QUASES^? program in that a duplex oxide structure was found containing a thin outer surface hydroxide (Fe(OD)₂) layer over an inner oxide (FeO) layer. The extraordinary depth resolution of the ToF‐SIMS profiles assisted in identifying the two phases; this resolution was achieved by compensation for surface roughness. A substantial concentration of deuterium was found in the subsurface oxide layer. This observation confirmed previous assessments that the formation of FeO was from the reaction of Fe(OD)₂ with outward‐diffusing Fe, leaving deuterium as a reaction product. Copyright © 2005 John Wiley & Sons, Ltd.     

Radical copolymerization of citraconic acid with styrene in dioxane solution

Styrene and citraconic acid (CA) were copolymerized in the dioxane solution ranging mole fraction of CA in feed from 0.1 to 0.9 at 70 °C. The terminal and penultimate models were used to fit the copolymer composition equation. Curve fitting, Mayo-Lewis, Joshi-Joshi, Fineman-Ross, Ezrielev-Brokhina-Roskin, Kellen-Tüd?s methods were used to solve the copolymer equation in terminal model. Besides these methods Solver in Excel 97 was used to solve copolymer equation in terminal and penultimate models of copolymerization. Experimental mole fractions of CA and those predicted from both models are agreed within the precision of the method used for the copolymer analysis, so the copolymer composition does not permit a definite choice of the adequate copolymerization model.     

V-Ag-Ni系氧化物的表面氧性质与甲苯选择性氧化的催化性能

制备了一系列Ｖ，Ａｇ，Ｎｉ原子比不同的三元氧化物，应用ＴＰＤ－ＭＳ技术研究了样品表面氧的性质，并测定了甲苯选择性氧化生成苯甲醛的催化活性。实验结果表明，样品表面存在有多种吸附的氧物种。在脱附温度＜９００℃：当Ｎｉ含量对Ａｇ（或Ｖ）的原子比为０．２５或０．５０时，仅在低温处出现有表面的Ｏ＾－和Ｏ＾２＾－两种氧物种的脱附峰；当Ｎｉ含量对Ａｇ（或Ｖ）的原子比增高到＞０．７５时，除有表面的Ｏ＾－和Ｏ＾２＾     

First radical cation salts of 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions: β-(BDA-TTP)4Cu2Cl6 and (BDA-TTP)2CuCl4

New radical cation salts based on 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions, β-(BDA-TTP)₄Cu₂Cl₆ and (BDA-TTP)₂CuCl₄, were synthesized and structurally characterized. Single crystals were prepared by electrochemical oxidation of BDA-TTP under galvanostatic conditions. X-ray diffraction study demonstrated that the salts have a layered structure, in which the conducting BDA-TTP layers alternate with the [Cu₂Cl₆]²⁻ or [CuCl₄]²⁻ anions. Both salts show the semiconductor-type temperature dependence of the conductivity. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 48–54, January, 2007.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.