NBR/ORGANOMODIFIED BENTONITE INTERCALATED HYBRIDS AND THEIR EFFECTS ON THE TOUGHNESS OF PVC

Hybrids of intercalative nitrile-butadiene rubber/organomodified bentonite (NBR/OMB) were prepared by thelatex intercalation technique. Investigation of their mechanical properties and the microstructore of NBR/OMB showed thatthe organomodified bentonite is an effective toughener for NBR. Transmission electronic microscopy (TEM) and X-rnydiffraction (XRD) tests showed that the NBR macromolecule could be intercalated into the galleries of bentonite.Incorporation of NBR/OMB hybrids as tougheners into poly(vinyl chloride) (PVC) results in a substantial increase in theimpact strength of PVC, but little decrease in its tensile strength and flexural strength, compared to the unmodified PVC.     

ZnO对Ag/SiO2催化剂银的分散作用及对吲哚合成稳定性的影响

将ZnO助剂加到由苯胺和乙二醇一步合成吲哚的Ag/SiO2催化剂中,发现ZnO助剂能大大提高催化剂的稳定性.XRD和TEM表征首次得到:ZnO是结构型助剂,它能使银很好地分散在SiO2表面上,并可有效地抑制反应过程中银粒子的烧结.     

SO42-/Zr-ZSM-5 超强酸催化剂的制备和表征

以硅溶胶和氧氯化锆为硅源和锆源，采用水热合成的方法制得具有ZSM-5结构的Zr-Si分子筛；用0.5mol/L的硫酸处理该分子筛，并在550℃焙烧，制得具有ZSM-5结构的SO4^2-/ZrO2-SiO2分子筛型的固体超强酸。采用XRD、SEM、TG、IR、NH3-PHD和指示剂法对其结构和酸性进行表征。结果表明，该SO4^2-/ZrO2-SiO2具有ZSM-5结构和超强酸性，其酸强度大于-13.75，且具有良好的热稳定性。     

混合二烃基二氯化锡与水杨醛缩苯胺类Schiff碱1∶1配合物的合成和表征

由混合二烃基二氯化锡（ＲＲ＇ＳｎＣｌ＿２）与水杨醛缩苯胺类Ｓｃｈｉｆｆ碱（２－ＨＯＣ＿６Ｈ＿４ＣＨ＝ＮＡｒ）反应，合成了１４种新的有机锡配合物。经元素分析、ＩＲ、ＮＭＲ和ＴＧ－ＤＳＣ测定，确定配合物的组成是有机锡与Ｓｃｈｉｆｆ碱的１：１配合物，配体以酚羟基氧原子与锡原子配位，摩尔电导率测定表明配合物均为非电解质。     

BaTiO3纳米晶的制备和结构

ＢａＴｉＯ_３纳米晶的制备和结构方佑龄，赵文宽，邹化民，王仁卉（武汉大学化学系，武汉大学物理系，武汉，４３００７２）关键词钛酸钡纳米晶，过氧化物，制备，结构ＢａＴｉＯ３具有高介电常数及优异的铁电、压电性能，是一种重要的电子陶瓷材料，因此，对其纳米晶的?..     

晶性3，4－聚异戊二烯的结构研究

采用ＷＡＸＤ、ＳＡＸＳ和Ｘ－射线平板照相法研究了不同聚合条件和拉伸倍数下的晶性３，４－聚异戊二烯的结构．结果发现，降低催化体系反应速度有利于产物结晶；不同的含氮类给电子试剂对聚合物的结晶结构影响较大．取向样品随着拉伸倍数的增加结晶度和长周期增大，微晶尺寸变小．ＳＡＸＳ的散射强度计算表明，该聚合物属多分散非均一粒子体系，微孔半径在３．５－１６．４ｎｍ间．     

On a characterization of the normal distribution by means of identically distributed linear forms

Let X₁, X₂,…, be independent, identically distributed random variables. Suppose that the linear forms L₁ = Σ_j=1^∞a_jX_j and L₂ = Σ_j=1^∞b_jX_j exist with probability one and are identically distributed; necessary and sufficient conditions assuring that X₁ is normally distributed are presented. The result is an extension of a theorem of Linnik (Ukrainian Math. J.5 (1953), 207–243, 247–290) concerning the case that the linear forms L₁ and L₂ have a finite number of nonvanishing components. This proof only makes use of elementary properties of characteristic functions and of meromorphic functions.     

PBO纤维的合成及其微观结构

聚对苯撑苯并双唑 (PBO)纤维是一种高强度、高模量、高热稳定性、高耐化学腐蚀性的新型纤维。着重介绍了PBO纤维的合成工艺、纺丝工艺 ;并对PBO的微观结构形态和表征方法进行了综合评述。     

锌(Ⅱ)与2,2′-联吡啶胺(dpa)和3-苯丙酸(HPPr)混配配合物的合成、晶体结构及性质表征

合成了锌（Ⅱ）与２，２′－联吡啶胺（ｄｐａ）和３－苯丙酸（ＨＰＰｒ）混配配合物［Ｚｎ（ｄｐａ）（ＰＰｒ）２］·２Ｈ２Ｏ，并测定其晶体结构．晶体属三斜晶系，Ｐ１空间群，晶胞参数ａ＝１０．５４１（１）ｎｍ，ｂ＝１１．３３３（１）ｎｍ，ｃ＝１１．６９８（１）ｎｍ，α＝９１．００（１）°，β＝９０．９６（１）°，γ＝８８．３８（１）°，Ｚ＝２，２个ＰＰｒ－１羧基上的４个氧原子、１个ｄｐａ上的２个氮原子分别与中心离子Ｚｎ（Ⅱ）配位，构型为畸变八面体．２个结晶水与配体间可能存在着分子内氢键．通过元素分析、ＩＲ、摩尔电导和热重分析表征了配合物的结构．     

Thermal analysis and thermal expansion studies on high density YBa2−xLaxCu3O7−δ, 0x0.2

The compositions in the YBa_2−xLa_xCu₃O_7−δ (0x0.2) system were prepared by the solid state reaction, employing a novel high-temperature oxygen sintering route. The modified sintering route yields dense slab like microstructures with large grains. The decomposition (incongruent melting) temperature of the YBa₂Cu₃O_7−δ (Y-123) phase was found to shift to higher temperatures with increasing oxygen partial pressure and lanthanum content. Structure remained orthorhombic up to x=0.2 with a decrease in the orthorhombic strain ((b−a)/b). Iodometric titration indicated a systematic increase in the oxygen content with increasing lanthanum content. Thermo-gravimetric studies in various oxygen partial pressures revealed that the oxygen diffusion in to the YBa₂Cu₃O_7−δ (δ>0.5) lattice is an exothermic event and takes place at temperatures not less than 573 K. High-temperature thermal-expansion measurements in air indicated that the nonlinearity in thermal expansion behaviour was reduced by the substitution of lanthanum.