Evaluation of SARs for the prediction of skin irritation/corrosion potential–structural inclusion rules in the BfR decision support system†

The German Federal Institute for Risk Assessment (BfR) has developed a Decision Support System (DSS) to assess certain hazardous properties of pure chemicals, including skin and eye irritation/corrosion. The BfR–DSS is a rule-based system that could be used for the regulatory classification of chemicals in the European Union. The system is based on the combined use of two predictive approaches: exclusion rules based on physicochemical cut-off values to identify chemicals that do not exhibit a certain hazard (e.g., skin irritation/corrosion), and inclusion rules based on structural alerts to identify chemicals that do show a particular toxic potential. The aim of the present study was to evaluate the structural inclusion rules implemented in the BfR–DSS for the prediction of skin irritation and corrosion. The following assessments were performed: (a) a confirmation of the structural rules by rederiving them from the original training set (1358 substances), and (b) an external validation by using a test set of 200 chemicals not used in the derivation of the rules. It was found as a result that the test data set did not match the training set relative to the inclusion of structural alerts associated with skin irritation/corrosion, albeit some skin irritants were in the test set.     

The band alignment at CdS/Cu2ZnSnSe4 heterojunction interface

Band alignment at CdS/Cu₂ZnSnSe₄ heterojunction interface is studied by X‐ray photoemission spectroscopy. The Cu₂ZnSnSe₄ thin films are prepared by selenization of electrodeposited Cu‐Zn‐Sn precursors. CdS overlayers with different thickness are sequentially grown on the Cu₂ZnSnSe₄ substrate by pulsed laser deposition process. Photoemission spectra are obtained before and after each growth to study the conduction and valence band offsets at the heterojunction interface. The determined conduction band offset of 0.34 eV indicates a spike‐like ‘type I’ band alignment at CdS/Cu₂ZnSnSe₄ interface. The spike will avoid interface recombination, and it is low enough that electron could transfer from the Cu₂ZnSnSe₄ layer to the buffer layer which is suitable for solar cell's fabrication. Copyright © 2012 John Wiley & Sons, Ltd.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

Synthesis and properties of new materials with banana-shaped achiral cores and chiral end groups

New chiral bent-core mesogens, derivatives of 1,3-phenylene bis[4-(alkanyloxyphenyliminomethyl)benzoate], were synthesized with variation of a substituent (X=F, Cl); their antiferroelectric properties are described. The mesomorphic and switching properties were characterized by differential scanning calorimetry, polarizing optical microscopy, triangular wave method, and X-ray diffractometry in the small and wide angle regions. The presence of chiral tails at the terminals of side wings in the bent-core molecules induced a decrease in transition temperature and formation of the switchable SmC* phase in the melt. In addition, the introduction of a lateral halogen substituent in the Schiff's base moiety prevented the regular stacking of the molecules, resulting in the formation of very complex optical textures. The smectic phase with F-substituted PBFDOB and Cl-substituted PBCDOB showed layer spacings of 39 and 38.5?Å, respectively, corresponding to the end-to-end distance of molecules with a bent conformation. Significantly, the smectic phases of PBFDOB and PBCDOB exhibited a period of 179.5 and 131?Å, respectively, compatible with a helical structure with periodicity about 4.6 and 3.4 times the layer spacings.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Synthesis and properties of novel 1,1‐difluoropropoxy‐linked liquid crystalline compounds of negative dielectric anisotropy

A series of liquid crystalline compounds having the difluoropropyleneoxy moiety (–OCF₂C₂H₄–) as a linking group has been synthesized. The physical properties, i.e. dielectric anisotropy, birefringence, viscosity and phase transition temperatures, have been measured. This novel class of compounds shows a larger negative dielectric anisotropy than the corresponding compounds having a propyleneoxy (–OC₃H₆–) linking group. Their dielectric properties may be explained by the combined effect of fluorine atoms with large electron negativities and the electron donating feature of an oxygen atom substituted on the same carbon atom. The semi‐empirical quantum calculation method (AM1) also confirmed this dielectric behaviour of the difluoropropyleneoxy linkage group.     

A small-angle X-ray scattering study of nanoparticle assembly in an aligned nematic liquid crystal

The assembly of colloidal particles in a nematic liquid crystal has been investigated using small-angle X-ray scattering. The structure and orientation of nanoparticle assemblies in bulk samples of aligned nematic liquid crystal have been determined. The method offers some advantages over optical microscopy, which is usually restricted to investigations of thin cells and micron-sized particles. The scattering from chains of particles has been calculated, and comparison with experimental results has shown that suspensions of 48 and 105 nm diameter silica nanoparticles formed highly ordered structures perpendicular to the liquid crystal director, consistent with quadrupolar defect-induced assembly.     

Controllable alignment of liquid crystals based on the surface relief gratings from a photocross-linkable organic monomer

The orientational control of liquid crystal (LC) molecules is essential for high-quality liquid crystal displays, and the photo-induced surface relief grating (SRG) is a facile and effective non-contact process. Here, SRGs with different period and depth were prepared with a photocross-linkable organic monomer 4-propyldiphenylacetylenecarboxylic acid cinnamyl ester (PDACE), and the LC alignment induced by SRG was studied. It is found that both the surface topography and the chemical nature of the surface are responsible for the LC alignment, which is strongly dependent on the groove geometry of the gratings. Furthermore, the patterned LC cell was fabricated with the patterned SRG surface. These results demonstrate that the planar, perpendicular and patterned orientations of LC can be easily photo-controllably obtained with PDACE, which have important applications in optical devices.