Rapid transacylations of activated ester substrates bound to the primary side β-cyclodextrin-cyclen conjugate and its M2+ complexes

The ability of cyclodextrins to effect rapid transacylations of bound substrates has been well studied. One important difference between cyclodextrin and enzyme-mediated transacylation is the pH required. Because the pK _a of a cyclodextrin secondary-side hydroxyl group is about 12, transacylations are accelerated in the presence of cyclodextrin under basic conditions (pH > 10.5). In 1988, our group reported the synthesis of cyclodextrin with attached cyclen-Co(III) complexes; significant acceleration in the reaction withp-nitrophenyl acetate was observed only with the primary side derivative. Of course, metalloenzymes utilize M²⁺ and not M³⁺ catalytic centers; in addition, large rate accelerations in the transacylations of both activated and unactivated substrates have been observed previously in systems utilizing M²⁺ ions (e.g., Zn, Cu, Ni) as well as M³⁺ ions (e.g. Co, Ir, Cr). In this paper, we describe the ability of CD-cyclen-M²⁺ conjugates to transacylate activated esters, amides, and phosphates. In addition, the ability of the apoenzyme mimic to effect transacylations was examined.     

Ion association in calcium phosphate solutions at 37°C

Ion association in the system Ca(OH)₂–H₃PO₄–KCl–H₂O at 37°C has been studied potentiometrically over a range of pH from 3 to 9. The experimental conditions were optimized for the accurate determination of the association constants for the formation of the ion pairs CaH₂PO ₄ ⁺ , CaHPO₄ and CaPO ₄ ^– which were found to be 27.9±0.1, 591±2, and (1.35±0.02)×10⁶ L-mol^–1, respectively.     

Solubility of (UO2)3(PO4)2?4H2O in H+-Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O and Its Comparison to the Analogous PuO2 +2 System

The objectives of this study were to address uncertainties in the solubility product of (UO₂)₃(PO₄)₂⋅4H₂O(c) and in the phosphate complexes of U(VI), and more importantly to develop needed thermodynamic data for the Pu(VI)-phosphate system in order to ascertain the extent to which U(VI) and Pu(VI) behave in an analogous fashion. Thus studies were conducted on (UO₂)₃(PO₄)₂⋅4H₂O(c) and (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubilities for long-equilibration periods (up to 870 days) in a wide range of pH values (2.5 to 10.5) at fixed phosphate concentrations of 0.001 and 0.01 M, and in a range of phosphate concentrations (0.0001–1.0 M) at fixed pH values of about 3.5. A combination of techniques (XRD, DTA/TG, XAS, and thermodynamic analyses) was used to characterize the reaction products. The U(VI)-phosphate data for the most part agree closely with thermodynamic data presented in Guillaumont et al.,⁽¹⁾ although we cannot verify the existence of several U(VI) hydrolyses and phosphate species and we find the reported value for formation constant of UO₂PO⁻₄ is in error by more than two orders of magnitude. A comprehensive thermodynamic model for (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubility in the H⁺-Na⁺-OH⁻-Cl⁻-H₂PO⁻₄-HPO²⁻₄-PO³⁻₄-H₂O system, previously unavailable, is presented and the data shows that the U(VI)-phosphate system is an excellent analog for the Pu(VI)-phosphate system.     

Crystal structure of the parent misfit-layered cobalt oxide [Sr2O2]qCoO2

The crystal structure of our newly discovered Sr-Co-O phase is investigated in detail through high-resolution electron microscopy (HREM) techniques. Electron diffraction (ED) measurement together with energy dispersive X-ray spectroscopy (EDS) analysis show that an ampoule-synthesized sample contains an unknown Sr-Co-O ternary phase with monoclinic symmetry and the cation ratio of Sr/Co=1. From HREM images a layered structure with a regular stacking of a CdI₂-type CoO₂ sheet and a rock-salt-type Sr₂O₂ double-layered block is observed, which confirms that the phase is the parent of the more complex “misfit-layered (ML)” cobalt oxides of [M_mA₂O_m+2]_qCoO₂ with the formula of [Sr₂O₂]_qCoO₂, i.e. m=0. It is revealed that the misfit parameter q is 0.5, i.e. the two sublattices of the CoO₂ sheet and the Sr₂O₂ block coexist to form a commensurate composite structure. We propose a structural model with monoclinic P2₁/m symmetry, which is supported by simulations of ED patterns and HREM images based on dynamical diffraction theory.     

Location of type B carbonate ion in type A-B carbonate apatite synthesized at high pressure

The structure of a complex, disordered type A-B carbonate apatite (CAp) of approximate composition Ca₁₀(PO₄)_6−y(CO₃)_x+(3/2)y(OH)_2−2x, x-0.7, y-0.6, synthesized at 3 GPa, 1400°C has been determined using single-crystal X-ray diffraction and FTIR spectroscopy at room temperature and pressure. Crystal data are: hexagonal, space group P6₃/m, Z=1; a=9.5143(3), c=6.8821(2) Å, V=539.5 Å³, and R=0.025. There are three structural locations for the carbonate ion. The channel carbonate is mainly in the closed vertical configuration of the structure, with two of its oxygen atoms close to the c-axis (A1 carbonate; IR bands at 1541 and 1449 cm⁻¹), but subordinate amounts are also located in an open vertical configuration (A2 carbonate; IR bands at 1563 and 1506 cm⁻¹). The type B carbonate ion is located close to the sloping faces of the PO₄ tetrahedron (IR bands at 1474 and 1406 cm⁻¹), confirming earlier inferences from polarized IR spectra.     

光固化阻燃单体、树脂合成及其阻燃机理研究

本文综述了过去十余年间中国科技大学施文芳教授研究组在光固化阻燃技术领域的工作成果，主要包括活性单体、稀释剂、光固化树脂配方等体系，品类有磷酸酯类单体、含磷丙烯酸酯、超支化丙烯酸酯树脂、膦酸酯类单体和树脂、丙烯酸化环状磷腈、甲基丙烯酸化三聚氰胺、含磷环氧单体等十余种。同时介绍了这些配方体系的合成、性能和应用方法，以及对其热降解、阻燃性能评价和阻燃机理的研究。     

Ammonium-chlor(thio)phosphat-Betaine,eine Klasse koordinationsstabilisierter Chlor(thio)metaphosphate

Ammonium Chloro(thio)phosphate Betaines, a Class of Coordination-stabilized Chloro(thio)metaphosphates Ammonium chloro(thio)phosphate betaines behave like systems being in equilibrium with tert. amine and monomeric chloro(thio)metaphosphate. In solution at room temperature the amine component can be displaced by stronger donors. Mass spectra reveal the presence of ClPS₂ as monomer and dimer, of ClPO₂ by fragment ions of the dimer, trimer, and tetramer before reorganization takes place to form PXCl₃ and P₄X₁₀ (X = O, S). Detection of ClPOS fails owing to fast equilibration into ClPO₂ and ClPS₂.     

Thermochemical Properties and Decomposition Kinetics of Ammonium Magnesium Phosphate Monohydrate

Ammonium magnesium phosphate monohydrate NH4MgPO4·H2O was prepared via solid state reaction at room temperature and characterized by XRD, FT-IR and SEM. Thermochemical study was performed by an isoperibol solution calorimeter, non-isothermal measurement was used in a multivariate non-linear regression analysis to determine the kinetic reaction parameters. The results show that the molar enthalpy of reaction above is （28.795 ± 0.182） kJ/mol （298.15 K）, and the standard molar enthalpy of formation of the title complex is （-2185.43 ± 13.80） kJ/mol （298.15 K）. Kinetics analysis shows that the second decomposition of NH4MgPO4·H2O acts as a double-step reaction： an nth-order reaction （Fn） with n=4.28, E1=147.35 kJ/mol, A1=3.63×10^13 s^-1 is followed by a second-order reaction （F2） with E2=212.71 kJ/mol, A2= 1.82 × 10^18 s^-1.     

Strukturen aus AIB2− und BaAl4−analogen Einheiten. I Die Verbindungen Sr4Pd5P5 und Sr2Pd3P3

Structures with AIB₂? and BaAl₄?type Units. I The Compounds Sr₄Pd₅P₅ and Sr₂Pd₃P₃ Sr₄Pd₅P₅ (Cmcm, a = 4.177(1) Å, b = 31.377(5) Å, c = 8.581(2) Å, Z = 4) und Sr₂ Pd₃P₃(Pmmm, a = 4.199(1) Å, b = 4.212(1) Å, c = 34.227(4) Å, Z = 4) have been prepared by heating the elements. Both structures contain exclusively units characteristic for the AIB_2? and BaAl₄?type. The ratio between isolated P-atoms and P₂?pairs is interpreted with an ionic splitting of the formulas.     

锂离子蓄电池正极材料LiFePO4研究进展

锂离子电池正极材料正在向着高比能量、长寿命、低成本、环境友好的方向发展,而具有橄榄石结构的LiFePO_4正极材料以其结构稳定、成本低、无污染等优点成为21世纪最理想的绿色电源,但自身也存在缺点。综述了锂离子电池正极材料LiFePO_4的研究进展。系统地阐述了LiFePO_4的晶体结构特征及性能、多种合成方法以及掺杂多种导电材料和控制晶体生长制备纳米粉体对材料性能的影响。对该材料的应用前景进行了展望,并提出了下一步可能的研究趋势。