Spectrophotometric determination of total phenolics by solvent extraction and sorbent extraction optosensing using flow injection methodology

Flow injection analysis (FIA) procedures for the Spectrophotometric determination of phenol involving in-line concentration by solvent and sorbent extraction have been developed. The imine product formed in the reaction between phenol and 4-aminoantipyrine (4-AAP) is either extracted into chloroform (solvent extraction) or is temporarily retained on C₁₈-modified silica material contained in a microcolumn (sorbent extraction). In the latter case two variants of detection have been used namely the Spectrophotometric measurement of the methanolic eluent containing the concentrated dye and at-column optosensing of the retained reaction product followed by methanol elution to maintain reversibility of the process. In the solvent extraction procedure a 10-fold increase of sensitivity compared to the common FIA method without extraction is achieved but no corresponding improvement in detectability is observed. Under optimized conditions the detection limit amounts to 8 μg l⁻¹. Using sorbent extraction methodology, high concentration factors can be obtained when large sample volumes are used. The only limitation in getting correspondingly lower detection limits are an increasingly high and variable blank value with sampling volume. The detection limits obtained for measurement of the absorbance in the eluent and on-column optosensing are 11 μg l⁻¹ and 0.4 μg l⁻¹, respectively. A study of the extractability of various phenol derivates using both solvent and sorbent extraction revealed lower relative response rates compared to the FIA method without extraction. Phenolics that possess an additional acidic group are present in ionized form at the high pH of the assay and are not extractable at all.     

On-line sorption preconcentration of metals based on mixed micelle cloud point extraction prior to their determination with micellar chemiluminescence: Application to the determination of chromium at ng l levels

The on-line incorporation of cloud point extraction (CPE) to flow injection analysis (FIA) is modified to extract and preconcentrate metal species rapidly, avoiding the formation of hydrophobic complexes, using a mixed micellar medium. Coupling the procedure with chemiluminescence (CL) detection based on the catalytic activity of metal species on the luminol-hydrogen peroxide reaction and enhancing the signal with the presence of a micellar carrier containing bromide ions produces a powerful tool for the preconcentration and determination of metal species at ng l⁻¹ levels. As an analytical demonstration ultratrace concentrations of chromium were conveniently detected and quantified in samples with a complex matrix such as seawater and wastewater. The figures of merit for the determination of chromium were: 0.9-1.6% R.S.D. (n=5) with detection and quantification limits 0.5 and 2.0 ng l⁻¹, respectively. The calibration graph was rectilinear from 2 to 200 ng l⁻¹ (r=0.9996, n=6). Several other metal ions were determined in ideal situations, with analogous results.     

水中酚的膜萃取分离流动注射技术测定的研究

本文提出了硅橡胶膜在线萃取分离流动注射技术测定水样中苯酚的方法。由于水样中的苯酚透过硅橡胶进入萃取液的萃取量随时间的增加和温度的升高而增大，故采用停流技术及升高温度以降低酚的检出限。     

离子选择电极—流动注射分析法动力学测定葡萄糖存在下的果糖

本文将离子电极与流动注射分析相结合，利用３０℃下，在强碱性介质中，果糖和葡萄糖与２，４－二硝基酚钠反应速度明显差异，动力学测定了葡萄糖存在下果糖的含量。自制了２，４－二硝基酚电极作为动力学电位测定用的工作电极。本法测定果糖的范围为０．０２～１．００ｍｏｌ／Ｌ，其ＲＳＤ为４．０％～４．９％，ＲＥ为１．０～５．０％；当Ｃ葡／Ｃ果≤３倍时，葡萄糖的干扰不超过５％；本法也曾成功地用于果葡萄浆测定，其ＲＳＤ     

Solid Phase Extraction Chemiluminescence Determination of Methamidaphos on Vegetables

IntroductionDuring recent years,organophosphorus pesticides(OPPs)have been widely used in agriculture becauseof their low environmental persistence and high effec-tiveness.However,they have a high acute toxicity.Trace amounts of OPPs may remain in foodstu…     

Diffusion coefficients from stopped-flow gas chromatography

Summary Mutual diffusion coefficients of two gases A and B can be determined in an empty gas chromatographic column by letting component B enter at an intermediate position of the column and continuously flow through a part only of it, as a carrier gas. The other component A is injected in a small amount instantaneously at the closed end of the column with the detector placed at the other end. By repeatedly stopping and then restoring after a short time the flow of B, narrow extra peaks are produced on the chromatographic elution curve, owing to diffusion of A into B. An equation is derived giving the area under the curve of each stop-peak as a function of time of the corresponding stop. Plotting the experimental data according to this equation permits the determination of the diffusion coefficient of A into B. Some results obtained by this method show negligible variations with changes in the experimental parameters.     

Development and validation of a stability-indicating HPLC method for the determination of degradation products in dipyridamole injection

Summary The development and subsequent validation of an isocratic high-performance liquid chromatographic (HPLC) procedure employing ultraviolet (UV) detection for the determination of degradation products in Dipyridamole Injection is reported. The development of this assay involved the evaluation of several factors including buffer type, ionic strength, pH, organic composition, and column type. The described method is simple, reproducible, accurate, and selective. The precision, relative standard deviation (RSD), amongst five sample preparations for total degradation products was not more than (NMT) 10.2 %, while the individual degradation products were NMT 12.1%. Intermediate precision, as determined from fifteen sample preparations, generated by two Analysts on different HPLC systems over three days, exhibited an RSD for total and individual degradation products of 8.2 % and NMT 27.5 %, respectively. The mean absolute recovery of dipyridamole using the described method is 102.1±1. 9%, (mean±SD, n=12) over the concentration range of 0.03 % to 5.0 % of its label claim of 5 mg mL⁻¹. The limit of detection and limit of quantitation were 0.1 and 0.3 μg mL⁻¹, respectively. The linearity of the peak response was verified with respect to dipyridamole concentration over a range of 0.3 and 50 μg mL⁻¹ (0.03 % to 5.0 % label claim). The Standard and Assay Preparations are stable for up to 48 hours at room temperature. The selectivity was evaluated by subjecting the finished product (Dipyridamole Injection) to thermal, acidic, basic, oxidative and fluorescent radiation stress conditions. No interference in the analysis of degradation products was observed, showing the method is stability-indicating.     

A simple flow injection-reduced volume column system for hemoglobin typing

A flow injection (FI)-reduced volume column system was developed for hemoglobin (Hb) typing to be used as an initial screening method for thalassemia. The column was packed with 140 μl diethylaminoethyl (DEAE)-Sephadex A-50 ion exchange beads. Hb can be separated using Tris–HCl buffer solution with pH gradient 8.5–6.5 and then monitored spectrophotometrically at 415 nm. The hemolysate of 40 blood samples from packed red cells were screened for thalassemia by determining the amount of HbA₂ and HbE present. The proposed system was able to predict positive test results from those samples with β, E-trait and EE homozygous thalassemia, Hb types that were independently identified following the conventional method at the hospital laboratory. Advantages of the proposed system over the conventional column technique include low amount of reagents and blood sample needed, short analysis time and low cost. Each analysis required only 80 μl of 50 times diluted packed cells, which is equivalent to 1.6 μl undiluted packed cells, and it can be completed in only 35 min. This simple FI-reduced volume column system was demonstrated to be an economic alternative system for Hb typing to initially screen some types of thalassemia such as β-trait, E-trait and EE-homozygous which are commonly found in Thailand.     

流动注射光度法同时测定铜基合金中的铝和铁

提出了同时测定铜基合金中铝和铁的流动注射分析法。以０．０４ｍｏｌ／ＬＨＣｌ作载液，铬天青Ｓ为显色剂，通过测定６２８ｎｍ处铝、铁两配合物的吸光度之和及铝配合物的吸光度，实现了两组分的同时测定。在优化的实验条件下，检测限：Ａｌ和Ｆｅ分别为１．６９×１０－３和１．７３×１０－３ｍｇ／Ｌ，Ａｌ浓度在０～０．８ｍｇ／Ｌ；Ｆｅ浓度在０～１．０ｍｇ／Ｌ时服从比耳定律。进样频率为６０样／ｈ，所拟方法用于实际样品分析，获得满意结果。     

反相流动注射化学发光法测定单宁

在碱性介质中 ,单宁对高碘酸钾氧化鲁米诺的化学发光反应有较强的增敏作用 ,据此建立了反相流动注射化学发光测定单宁的新方法 ,并研究了最佳反应条件。该方法快速、准确、线性范围宽 ,测定单宁的检出限为 1 .1 2× 1 0 - 9g/ m L,方法的线性范围为 2 .0× 1 0 - 8～ 6 .0× 1 0 - 6 g/ m L,对于 4.0× 1 0 - 6 g/ m L单宁 1 0次测定的相对标准偏差为 0 .79%。应用于中药五倍子、诃子中单宁的测定 ,结果满意