A pH‐responsive cyclopolymer having phospho‐ and sulfopropyl pendents in the same repeating unit: Synthesis,characterization, and its application as an antiscalant

A new zwitterionic monomer 3‐[diallyl{3‐(diethoxyphosphoryl)propyl}ammonio]propane‐1‐sulfonate has been synthesized and cyclopolymerized to give the corresponding polyzwitterion (±) (PZ) bearing both phosphonate and sulfonate functionalities on each repeating unit. phosphonate ester hydrolysis in PZ gave a pH‐responsive dibasic polyzwitterionic acid (±) (PZA) bearing ? PO₃H₂ units. The PZA under pH‐induced transformation was converted into polyzwitterion/anion (± ?) (PZAN) and polyzwitterion/dianion (± =) (PZDAN) having respective ? PO₃H^? and ? PO₃^2? units. The polymers′ interesting solubility and viscosity behaviors have been investigated in detail. The apparent protonation constants in salt‐free water and 0.1 M NaCl of the ? PO₃^2? in (± =) (PZDAN) and ? PO₃H^– in (± ?) (PZAN) as well as in their corresponding monomeric units have been determined. Evaluation of antiscaling properties of the PZA using supersaturated solution of CaSO₄ revealed ≈100% scale inhibition efficiency at a meager concentration of 20 ppm for a duration of 45 h at 40 °C. The PZA has the potential to be used effectively as an antiscalant in reverse osmosis plant. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5130–5142     

磷脂改性聚合物膜

综述了膦脂改性聚合物膜的制备方法，其中饭知光引发接枝、电晕放电、化学接枝、原位聚合、共混改性、物理吸附等方法，并对磷脂改性聚合物膜的部分性质和应用前景作了简单介绍。     

Control of block copolymer morphology: An example of selective morphology induced by self‐assembly formation condition

An example case of selective morphology by simply varying pH and heating profile based on a diblock copolymer, i.e., poly(N‐isopropylacrylamide) (PNIPAAM) and poly[2‐(dimethylamino)ethyl acrylate] (PDMAEA) is reported. A variation of pH induces an aggregation of the block copolymers in either micelles or vesicles. In a subsequent step, temperature variation triggers the formation of vesicular structures. This demonstrates not only the temperature but also the heating rate that tunes the nanostructures from micelles to vesicles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Irreversible temperature‐responsive formation of high‐strength hydrogel from an enantiomeric mixture of starburst triblock copolymers consisting of 8‐arm PEG and PLLA or PDLA

Starburst triblock copolymers consisting of 8‐arm poly(ethylene glycol) (8‐arm PEG) and biodegradable poly(L ‐lactide) (PLLA) or its enantiomer poly(D ‐lactide) (PDLA), 8‐arm PEG‐b‐PLLA‐b‐PEG ( Stri‐L ), and 8‐arm PEG‐b‐PDLA‐b‐PEG ( Stri‐D ) were synthesized. An aqueous solution of a 1:1 mixture ( Stri‐Mix ) of Stri‐L and Stri‐D assumed a sol state at room temperature, but instantaneously formed a physically crosslinked hydrogel in response to increasing temperature. The resulting hydrogel exhibited a high‐storage modulus (9.8 kPa) at 37 °C. Interestingly, once formed at the transition temperature, the hydrogel was stable even after cooling below the transition temperature. The hydrogel formation process was irreversible because of the formation of stable stereocomplexes. In aqueous solution, gradual hydrolytic erosion was observed because of degradation of the hydrogel. The combination of rapid temperature‐triggered irreversible hydrogel formation, high‐mechanical strength, and degradation behavior render this polymer mixture system suitable for use in injectable biomedical materials, for example, as a drug delivery system for bioactive reagents or a biodegradable scaffold for tissue engineering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6317–6332, 2008     

Effect of Polyethylene glycol methyl ether blend Humic acid on poly (vinylidene fluoride-co-hexafluropropylene) PVDF-HFP membranes: pH responsiveness and antifouling behavior with optimization approach

Flat sheet asymmetric membranes were fabricated with homogeneous solution of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) using N-methyl-2-pyrrolidone (NMP) as solvent via phase inversion method. PEGME (Poly ethylene glycol methyl ether) (M_n 5000) blend Humic Acid (HA), of different mole ratio was used as additive. Characterization of the membranes was done by Field emission scanning electron microscope (FESEM), Fourier Transform Infrared (FTIR) spectroscopy, Atomic force microscopy (AFM) and Differential scanning calorimetry (DSC) studies. Liquid-liquid displacement porosimetry (LLDP) study evaluated the morphological parameters, average pore size and pore size distribution. Bovine serum albumin (BSA) (M_W - 68,000 Da) was used to study the antifouling effect and pore blocking mechanism of the membranes. The pure water flux (PWF), solute rejection and flux recovery ratio drastically increases for the PEGME blended HA membranes whereas the water contact angle decreases significantly. The pH responsiveness character of the prepared membranes altered the hydraulic permeability and rejection % at different pH. Finally, optimization of the variables contributing towards the PWF and BSA rejection of the desired membrane was performed using Design expert software 9.0 TRIAL through ANOVA (analysis of variance) using the combination of response surface methodology (RSM) and central composite design (CCD).     

Current Rectification in Temperature‐Responsive Single Nanopores

Herein we demonstrate a fully abiotic smart single‐nanopore device that rectifies ionic current in response to the temperature. The temperature‐responsive nanopore ionic rectifier can be switched between a rectifying state below 34 °C and a non‐rectifying state above 38 °C actuated by the phase transition of the poly(N‐isopropylacrylamide) [PNIPAM] brushes. On the rectifying state, the rectifying efficiency can be enhanced by the dehydration of the attached PNIPAM brushes below the LCST. When the PNIPAM brushes have sufficiently collapsed, the nanopore switches to the non‐rectifying state. The concept of the temperature‐responsive current rectification in chemically‐modified nanopores paves a new way for controlling the preferential direction of the ion transport in nanofluidics by modulating the temperature, which has the potential to build novel nanomachines with smart fluidic communication functions for future lab‐on‐chip devices.     

Light‐Responsive Biomaterials: Development and Applications

Novel biomaterials are beneficial to the growing fields of drug delivery, cell biology, micro‐devices, and tissue engineering. With recent advances in chemistry and materials science, light is becoming an attractive option as a method to control biomaterial behavior and properties. In this Feature Article, we explore some of the early and recent advances in the design of light‐responsive biomaterials. Particular attention is paid to macromolecular assemblies for drug delivery, multi‐component surface patterning for advanced cell assays, and polymer networks that undergo chemical or shape changes upon light exposure. We conclude with some remarks about future directions of the field.

     

Synthesis of dual pH/temperature‐responsive polymers with amino groups by living cationic polymerization

For the precision synthesis of primary amino functional polymers, cationic polymerization of a phthalimide‐containing vinyl ether monomer precursor, 2‐vinyloxyethyl phthalimide (PIVE), was examined using a base‐assisting initiating system. Living polymerization of PIVE in CH₂Cl₂ in the presence of 1,4‐dioxane as an added base yielded nearly monodispersed polymers (M_w/M_n < 1.1) and higher molecular weight polymers, which have never been obtained using other initiating systems. Furthermore, block copolymers with hydrophobic or hydrophilic groups could be prepared. The deprotection of the pendant phthalimide groups gave well‐defined pH‐responsive polymers with pendant primary amino groups. Dual‐stimuli–responsive block copolymers having a pH‐responsive polyamine segment and a thermosensitive segment self‐assembled in water in response to both pH and temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1207–1213, 2010     

Multistimuli‐responsive hyperbranched poly(ether amine)s

Multistimuli‐responsive hyperbranched poly(ether amine)s (hPEAs) were successfully synthesized through nucleophilic addition/ring‐opening reaction of commercial diglycidyl ether and amine via one‐pot synthesis. In aqueous solution, these hPEAs exhibited very sharp response to temperature, pH, and ionic strength, with well‐tunable cloud point (CP). Through changing the poly(ethylene oxide) (PEO) chain content of hPEAs, pH, and ionic strength, the CP could be adjustable from 35 to 100 °C, and increased with the increasing of PEO content, the decreasing of pH and ionic strength. The CP of hPEAs aqueous solution presents a linear relationship to the PEO content in pH range from 6.6 to 8.0. Dynamic light scattering (DLS) investigation indicated that these hPEAs dispersed in aqueous solution to form the stable nanomicelles, whose aggregation can be controlled by temperature, pH, and ionic strength. Moreover, the obtained hPEAs contain reactive amino groups in periphery and hydroxyl groups inside, which can be further functionalized. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4252–4261, 2010