CONTINUUM TOPOLOGY OPTIMIZATION FOR MONOLITHIC COMPLIANT MECHANISMS OF MICRO-ACTUATORS

A multi-objective scheme for structural topology optimization of distributed compliant mechanisms of micro-actuators in MEMS condition is presented in this work, in which mechanical flexibility and structural stiffness are both considered as objective functions. The compliant micro-mechanism developed in this way can not only provide sufficient output work but also have sufficient rigidity to resist reaction forces and maintain its shape when holding the work-piece. A density filtering approach is also proposed to eliminate numerical instabilities such as checkerboards, mesh-dependency and one-node connected hinges occurring in resulting mechanisms. SIMP is used as the interpolation scheme to indicate the dependence of material modulus on element-regularized densities. The sequential convex programming method, such as the method of moving asymptotes (MMA), is used to solve the optimization problem. The validation of the presented methodologies is demonstrated by a typical numerical example.     

位移约束集成化处理的连续体结构拓扑优化

为解决多工况下多位移约束的连续体结构拓扑优化问题,引入了K-S函数对位移约束进行集成化处理.在建立优化模型时,基于莫尔定理按ICM方法导出约束点位移与设计变量之间的近似显函数关系,然后采用Lagrange乘子法进行求解.给出三个算例对该方法进行验证,并与ESO法、BESO法、MD法以及均匀化方法的结果进行比较.结果表明:该方法计算效率较高,并且能够计算出更合理的结构拓扑.     

Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

A note on the spheroidal modes vibration of an elastic sphere in linear viscoelastic fluid

Vibration characteristics of elastic nanostructures embedded in fluid medium have been used for biological and mechanical sensing, and also to investigate materials mechanical properties. An analytical approach based on the exact theory has been developed in this paper, to establish a new accurate and simple generalized frequency equation to predict spheroidal vibration of an elastic nanosphere, in a compressible viscoelastic fluid using linear Maxwell fluid model. To demonstrate the accuracy of the present approach, a comparison is made with the published theoretical results in the literature in some particular cases, which shows a very good agreement. Thus, the obtained frequency equation can be very useful to interpret the experimental measurements of vibrational dynamics of nanospheres and can serve as benchmark solution in design of liquid sensors.     

玻色化方法在超对称可积系统的应用

利用玻色化方法可以避免超对称可积系统中反对易费米场带来的计算困难. 本文以N=1超对称mKdVB系统为例, 利用玻色化方法, 将其转化为只有玻色场的耦合系统. 应用标准的WTC方法, 证明了该耦合系统具有Painlevé性质. 运用Painlevé截断方法, 可以得到玻色化后超对称mKdVB系统的非局域对称. 为了求解与非局域对称相关的Lie第一性原理, 引入新的场将玻色化后系统拓展为更大的系统. 通过引入新的场, 该非局域对称局域化为Lie点对称. 因此, 可以利用Lie点对称约化方法研究拓展后的系统, 得到超对称mKdVB系统的孤子与其他孤波相互作用解.     

若干高维可积和不可积模型的严格解

可积和不可积模型可以描述自然科学中的诸多现象, 寻找高维非线性模型的严格解已成为可积系统的一个重要研究内容. 结合达布变换法和多线性分离变量法, 可以得到多个(2+1)维非线性模型包含任意函数的严格解, 通过选取不同的任意函数, 构造这些非线性模型新的相互激发模式. 进一步推广了形变映射理论, 建立了变系数 场和sine-Gordon以及双sine-Gordon场的形变映射关系, 从而得到高维不可积模型包含任意函数的新严格解. 对任意函数的不同选择, 构造了sine-Gordon和双sine-Gordon可积模型丰富的局域解和周期解, 如多solitoff解及其周期波推广、周期形变的蛇形孤波解以及变模的拟周期解等.     

某型机进近段高精度相对姿态实时测量技术

某型机在飞行训练过程中,进近段的二维相对姿态数据对于该型机安全着陆有着至关重要的作用。基于无线网络电台的双向数据传输系统能够实时获取进近段飞机相对理想着陆点的水平、垂直相对位置数据。通过上行链路上传着陆点的姿态数据,下行链路实时下传动动差分后的差分数据,最后在中心控制站进行二次数据处理。该技术获得的进近段二维相对姿态精度达到厘米级,满足飞行训练的需求。同时结合飞机显控数据以及视景图,以多角化动态关联的方式将实时获取的姿态数据等呈现给指挥员,更好地辅助指挥员进行着陆指挥工作。     

Facile sonochemical synthesis of rutile-type titanium dioxide microspheres decorated graphene oxide composite for efficient electrochemical sensor

In this reports the facile and green synthesis of rutile-type titanium dioxide nanoparticles decorated graphene oxide nanocomposite via the ultrasonication process (frequency: 50 kHz, Power: 100 W/cm² and Ultrasonic type: Ti-horn). Because, the sonochemical synthesis method is simple, non-explosive and harmless method than other conventional technique. Furthermore, the synthesized material was characterized by various analytical techniques including FESEM, EDX, XRD, EIS and electrochemical methods. Then, the synthesized TiO₂ MPs@GOS composite was applied for the electrocatalytic detection of theophylline (TPL) using CV and amperometric (current-time) techniques. Captivatingly, the modified sensor has excellent electrocatalytic performance with the wider linear range from 0.02 to 209.6 µM towards the determination of theophylline and the LOD and sensitivity of the modified sensor was calculated as 13.26 nM and 1.183 μA·µM⁻¹·cm⁻², respectively. In addition, a selectivity, reproducibility and stability of the TiO₂ MPs@GOS modified GCE were analyzed towards the determination of theophylline molecule. Finally, the real time application of TiO₂ MPs@GOS modified theophylline sensor was established in serum and drug samples.     

Sonochemical approach for synthesis of zinc oxide-poly methyl methacrylate hybrid nanoparticles and its application in corrosion inhibition

Hybrid nanoparticles (HNPs) with zinc oxide and polymethyl metha acrylate (inorganic/ polymer) were synthesized through the exploitation of ultrasound approach. The synthesized HNPs were further characterized employing transmission electron microscopy and x-ray diffraction. ZnO-PMMA based HNPs exhibit excellent protection properties to mild steel from corrosion when gets exposed to acidic condition. Electrochemical impendence spectroscopy (EIS) analysis was accomplished to evaluate the corrosion inhibition performance of MS panel coated with 2 wt% or 4 wt% of HNPs and its comparison with bare panel and that of loaded with only standard epoxy coating., Tafel plot and Nyquist plot analysis depicted that the corrosion current density (I_corr) decreases from 16.7 A/m² for bare material to 0.103 A/m² for 4% coating of HNPs. Applied potential (E_corr) values shifted from negative to positive side. These results were further supported by qualitative analysis. The images taken over a period of time indicated the increase in lifetime of MS panel from 2 to 3 days for bare panel to 10 days for HNPs coated panel, showing that ZnO-PMMA HNPs have potential application in metal protection from corrosion by forming a passive layer.     

黏弹性接触界面端附近的奇异应力场

研究蠕变加载条件下线黏弹性材料接触界面端附近的奇异应力场问题.考虑接触界面的摩擦,假设界面端的滑移方向不改变,相对滑移量微小,且其与位移同量级,由此线性化局部边界条件,根据对应原理得到Laplace变换域中的界面端应力场,导出时域中奇异应力场的卷积积分表达式.对卷积积分核函数进行数值反演,考虑接触材料的两类组合,一是持久模量具有量级上的差异,另一是持久模量接近相同.算例结果证实核函数可以用准弹性法求得的解析式较准确地近似.在此基础上,利用积分中值定理,并引入各应力分量的修正系数,得到黏弹性奇异应力场的简化式.结合核函数的数值反演结果分析修正系数表达式的取值范围,得到如下结论,若两相接触材料的持久模量相差很大,可以采用准弹性解的解析式较准确地描述界面端的奇异应力场;一般情况下,应力场不存在统一的奇异值和应力强度系数,当采用类似于准弹性解的表达式近似给出黏弹性应力场时,可以估计此近似描述的误差限.文中最后采用有限元分析黏弹性板端部嵌入部位的应力场,算例包括了黏弹性板与弹性金属支承、黏弹性板与黏弹性垫层所形成的滑移接触界面端,利用黏弹性有限元的数值结果验证理论分析所得结论的有效性.