Excess Molar Volumes and Liquid–Liquid Equilibria of the Ionic Liquid 1-Methyl-3Octyl-Imidazolium Tetrafluoroborate Mixed with Butan-1-ol and Pentan-1-ol

Experimental densities were measured for the system 1-methyl-3-octyl-imidazolium tetrafluoroborate [OMIM][BF₄] + butan-1-ol, + pentan-1-ol at 298.15 K and ambient pressure using a vibrating tube densimeter, taking into account the influence of the viscosity correction. Excess molar volumes V^E have been determined. V^E is quite small and negative in the alcohol-rich range of the mixture composition and positive in the alcohol-poor range. LLE data of [OMIM][BF₄] + pentan-1-ol have been measured using a laser light scattering cell for detecting cloud points at different compositions in the temperature range of 282–292 K. A miscibility gap with an upper critical solution temperature (UCST) of 292 K has been found.     

Cyclodextrins with heterocyclic substitution as GC stationary phases

Summary Two new cyclodextrin (CD) derivatives, heptakis{2,6-di-O-pentyl-3-O-[3′-(2″-chloro-4″,5″-dioxylmethene)-phenyl-5′-iso-oxazolylmethyl]}-β-CD (CD I) and heptakis{2,6-di-O-methyl-3-O-[3′-(2″-chloro)-phenyl-5′-iso-oxazolylmethyl]}-β-CD (CD II) were synthesized and coated on fused-silica capillary columns. Their chromatographic characteristics, including column efficiency, polarity, selectivity and phase transition were studied and compared with similar β-CD stationary phases. It was found that the heterocycle group has a significant effect on the selectivity of the CD stationary phases. Both stationary phases can be successfully used to separate many di- and trisubstituted benzene positional isomers and show stronger separation ability in separating low-polarity benzene positional isomers than other β-CD stationary phases.     

Ionic liquid analogues formed from hydrated metal salts

A dark green, viscous liquid can be formed by mixing choline chloride with chromium(III) chloride hexahydrate and the physical properties are characteristic of an ionic liquid. The eutectic composition is found to be 1:2 choline chloride/chromium chloride. The viscosity and conductivity are measured as a function of temperature and composition and explained in terms of the ion size and liquid void volume. The electrochemical response of the ionic liquid is also characterised and it is shown that chromium can be electrodeposited efficiently to yield a crack-free deposit. This approach could circumvent the use of chromic acid for chromium electroplating, which would be a major environmental benefit. This method of using hydrated metal salts to form ionic liquids is shown to be valid for a variety of other salt mixtures with choline chloride.     

两种气相色谱固定相的研究

使用硫杂冠醚、穴醚[2.2.2]作气相色谱固定相制备毛细管柱,考察两种固定相的使用比例、极性、热稳定性,并对甲苯-苯、乙苯-甲苯、甲基苯酚（o/p）、二氯苯（o/p,m）、硝基氯化苯（m,o）、苯-环己烷、庚醇-辛醇、苯胺-N,N二甲基苯胺等混合样品进行色谱分离.实验结果表明：两种固定相在OV-1701中的比例均为15%时有较好的分离效果,都属于中等极性的固定相.硫杂冠醚、穴醚[2.2.2]的平均极性分别为815、832,其中硫杂冠醚固定相的热稳定性较好,有较高的使用温度（185℃）,而穴醚[2.2.2]的最高使用温度为120℃,因此穴醚[2.2.2]的使用温度受到一定的限制.从它们较好的分离性能看,固定相硫杂冠醚、穴醚[2.2.2]均具有较好的应用前景.     

Optical and Bioelectrochemical Characterization of Water‐Miscible Ionic Liquids Based Composites of Multiwalled Carbon Nanotubes

Acidic treated multiwalled carbon nanotubes (AMWNTs) were ground with water‐miscible room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄), and resulted in AMWNTs‐[bmim]BF₄ composite. Its electrical‐ionic conductivity and optical properties were compared with the other two types of carbon materials‐[bmim]BF₄ composites: pyrolytic graphite powder (PGP), pristine multiwalled carbon nanotubes (PMWNTs), through the ac impedance technology and Raman spectroscopy. The impedance data show that AMWNTs‐[bmim]BF₄ composite exhibits the highest conductivity. Raman spectra study exhibits that the [bmim]BF₄ can form gel with PMWNTs and AMWNTs but only form a viscous liquid with PGP. AMWNTs‐[bmim]BF₄ gel modified GC electrode was applied in direct electrochemistry of heme proteins (Hb and HRP) and it catalysis to the reduction of H₂O₂ was investigated.     

Kováts' coefficients for predicting polarities in silicone stationary phases and their mixtures

Summary A correlation between the retention polarity and the Kováts' coefficient has been found for a number of commercial stationary phases used in gas chromatography. The correlation has been used to predict the polarity of a few mixed stationary phase columns prepared as binary mixtures of OV-101 with OV-25, DC-550 or Carbowax 20M, and also mixtures of OV-225 with SP-2340. A linear relationship was found between polarity and mixture composition. The temperature dependence of the Kováts' coefficient was investigated and found to increase linearly with temperature, the rate of increase depending on the polarity of the stationary phase, with greater increases for more polar stationary phases.     

Effect of viscosity on stationary phase stability in capillary column gas chromatography

With recent advances in column technology it is now possible to prepare highly efficient, very inert, and thermally stable capillary columns coated with nonpolar polysiloxane stationary phases. Unfortunately, the same degree of success has not been achieved for some of the more polar polysiloxane phases. A parameter that has been studied little in the past in relation to stationary phase film stability is the viscosity of the stationary phase. In this paper the efficiency and stability of coated columns are correlated to the viscosity of the phase. Due to their structure, the viscosity of the phenyl-containing polysiloxanes change rapidly with temperature and hence, thin-film coatings are not stable at elevated temperatures. By using high viscosity phenyl-containing methylphenylpolysiloxanes which were recently synthesized, efficient and stable columns have been prepared.     

Use of 1-alkyl-3-methylimidazolium hexafluorophosphate room temperature ionic liquids as chelate extraction solvent with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione

Possible use of room temperature ionic liquids (RTILs) as chelate extraction solvent was evaluated by using 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]). These RTILs showed high extraction performance for divalent metal cations with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (Htta). The extracted metals were back-extracted into 1 mol dm⁻³ nitric acid quantitatively. Furthermore, the extracted species were estimated as neutral hydrated complexes M(tta)₂(H₂O)_n (n= 1 or 2) for M = Ni, Cu and Pb and anionic complexes M(tta)₃⁻ for M = Mn, Co, Zn and Cd.     

Preparation and characterization of spherical polymer packings from polybutadiene for size-exclusion chromatography

Porous polymer spherical particles for column packings in nonaqueous size-exclusion chromatography (SEC) were prepared from 1,2-syndiotactic polybutadiene by suspension and evaporation method. The polymer microbeads obtained were crosslinked by radical reaction between 2-vinyl groups in polybutadiene with ultraviolet radiation, to render them insoluble. These microbeads have wider chromatographic separation width than polystyrene column packings. In addition, the polybutadiene microbeads did not show the excessive retention observed with commercial polystyrene columns for polycyclic aromatic compounds. Therefore, a close correlation between the elution volume and M, for polycyclic aromatic compounds was observed with polybutadiene microbeads columns.     

Relative retention of the fibroblast growth factors FGF-1 and FGF-2 on strong cation-exchange sorbents

The isocratic retention of two heparin-binding fibroblast growth factors, FGF-1 (acidic FGF) and FGF-2 (basic FGF), was compared on a set of six preparative strong cation-exchange adsorbents. The FGFs comprise a solute pair that are structurally equivalent, yet differ in protein parameters of potential importance in cation-exchange chromatography, such as isoelectric point, net charge, and the number and distribution of basic amino acids. The cation-exchange adsorbents comprise a diverse set of materials in common use for protein purification, with physical and chemical properties that have been characterized and described previously. Isocratic k' values for the two proteins obtained on each adsorbent at several different [NaCl] are compared with one another and with corresponding data for hen egg lysozyme, which is also strongly retained on cation-exchangers. Of the six adsorbents examined, three showed strong retention of both FGFs, with equivalent k' values for FGF-1 and FGF-2. Three others, which showed weaker overall retention for the FGF pair, showed much larger retention differences between FGF-1 and FGF-2. The trends in retention order among the stationary phases are very similar to those seen previously with other unrelated proteins. However, retention differences between the two FGFs, and between the FGFs and lysozyme, do not correlate well with simple charge properties such as net charge, indicating, as in some previous studies, the importance of local regions on the protein surface in determining retention. These observations are interpreted in terms of the structural features of the proteins and the physicochemical properties of the adsorbents.