抗坏血酸锌的制备及标准生成焓测定

合成了一种新的补锌剂抗坏血酸锌,通过元素分析、红外光谱、热重、电导和化学分析确定了配合物的组成。用新型的具有恒定温度环境的反应热量计,在298·2K条件下分别测定了ZnO(s) C6H8O6(s)配位反应中反应物和生成物在2mol/L HCl溶液中的溶解焓,设计了一个新的热化学循环,得到固相配位反应焓。进而计算出配合物Zn(C6H7O6)2·4H2O(s)的标准生成焓:ΔfHm[Zn(C6H7O6)2·4H2O,s]=-3528·9±0·5kJ/mol。     

基于标准差和平均差的权系数确定方法及其应用

本文以工业经济效益的综合评价为应用背景 ,提出了一种确定多指标决策权系数的新方法———标准差和平均差极大化方法。运用该方法进行多指标决策和评价 ,概念清楚、涵义明确 ,决策和评价结果准确、可信、不具有主观随意性     

���ڸĽ�С����ֵȥ�뷨����Langmuir ̽���ź�

在分析软硬阈值去噪特点的基础上,提出一种改进的小波阈值函数。根据Langmuir探针I-V特性曲线的特点,提出一种改进的标准差估算方法来计算小波阈值。采用基于改进标准差和改进阈值函数的小波对探针特性曲线进行去噪,仿真结果表明,改进的方法取得了良好的去噪效果,提高了信号的信噪比,降低了均方误差,去噪效果优于传统阈值去噪方法。     

欧亚中高纬阻塞高压关键区高度场动力-统计跨季度预测实验

本文主要利用实际业务模式的预报结果和丰富的历史资料对乌拉尔山、 贝加尔湖和鄂霍次克海三个阻塞高压活动关键区夏季平均的500 hPa高 度场进行动力-统计跨季度预测实验, 其结果显示该方法能在一定程度上减小模式预报误差, 提高预报技巧, 显示出了良好的业务应用前景. 此外, 敏感性实验显示, 相似指标和相似年选取个数都对预测结果有显著影响. 关键词： 阻塞高压 高度场 动力-统计 跨季度预测     

Particle-number-conserving analysis of multiquasiparticle bands in ~(177)Lu

The experimental one-, three-, and five-quasiparticle bands in ~(177)Lu are analyzed by the particle-number conserving (PNC) method for treating the cranked shell model with pairing interaction, in which the blocking effects are taken into account exactly. The experimental moments of inertia are reproduced very well by PNC calculations with us free parameter.     

Precision tests of the standard model,the Higgs,and new physics

We present a concise review of the status of the standard model and of the search for new physics.     

UCFC晶体场理论方法（I）——UCFC方法基本概念与d^4组态空间标准基

作为以ｄ４／ｄ６离子为例系统地介绍“ＵＣＦＣ（统一晶场偶合）图象晶体场理论方法”（简称ＵＣＦＣ方法）的系列论文的第一篇，首先介绍了ＵＣＦＣ方法的基本概念，然后介绍了ｄ４／ｄ６离子ＵＣＦＣ方法基本内容的第一部分：ｄ４离子全组态空间标准基链的构造方法。第二篇将介绍如何在标准基链中建造能量矩阵链。第三篇将介绍ｄ４／ｄ６离子ＵＣＦＣ方法的ＥＰＲ理论部分。ＵＣＦＣ方法不仅是一种考虑ｄ电子组态全部多重态的完全计算方法，而且是一种统一的、规范化的、简洁的理论方法体系。它克服了强场、弱场等传统逐次对角化方法的局限性，不须区分晶体场的强弱，因而原则上可通用于任意过渡金属络合物。     

Optimization of Gold Nanoparticle-Based DNA Detection for Microarrays

DNA microarrays are promising tools for fast and highly parallel DNA detection by means of fluorescence or gold nanoparticle labeling. However, substrate modification with silanes (as a prerequisite for capture DNA binding) often leads to inhomogeneous surfaces and/or nonspecific binding of the labeled DNA. We examined both different substrate cleaning and activating protocols and also different blocking strategies for optimizing the procedures, especially those for nanoparticle labeling. Contact angle measurements as well as fluorescence microscopy, atomic force microscopy (AFM), and a flatbed scanner were used to analyze the multiple-step process. Although the examined different cleaning and activating protocols resulted in considerably different contact angles, meaning different substrate wettability, silanization led to similar hydrophobic surfaces which could be revealed as smooth surfaces of about 2–4 nm roughness. The two examined silanes (3-glycidoxypropyltrimethoxysilane (GOPS) and 3-aminopropyltriethoxysilane (APTES)) differed in their DNA binding homogeneity, maximum signal intensities, and sensitivity. Nonspecific gold binding on APTES/PDC surfaces could be blocked by treatment in 3% bovine serum albumin (BSA).     

Small Blocking Sets in PG(2, p3)

In this paper we show that a small minimalblocking set in PG(2,p³), with p 7,is of Rédei type.     

Processing optimization: A way to improve the ionic conductivity and dielectric loss of electroactive polymers

Electro‐active polymers (EAPs) such as P(VDF‐TrFE‐CTFE) are greatly promising in the field of flexible sensors and actuators, but their low dielectric strength driven by ionic conductivity is a main concern for achieving high electrostrictive performance. It is well known that there is a quadratic dependence of the strain response and mechanical energy density on the applied electric field. This dependence highlights the importance of improving the electrical breakdown EAPs while reducing the dielectric losses. This article demonstrates that it is possible to dramatically increase the electrical breakdown and decrease the dielectric losses by controlling processing parameters of the polymer synthesis and fabrication procedure. As a result, an enhancement of around 70% is achieved in both the strain and blocking force. The effects on the dielectric losses of the polymer crystallinity, molecular weight, solvent purity, and crystallization temperature are also investigated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1164–1173