Understanding the adsorption of 4H-1,2,4-triazole derivatives on mild steel surface in molar hydrochloric acid

This study examines the use of some 4H-triazole derivatives, namely 3,5-diphenyl-4H-1,2,4-triazole (DHT), 3,5-bis(4-pyridyl)-4H-1,2,4-triazole (4-PHT) and 3,5-bis(4-methyltiophenyl)-4H-1,2,4-triazole (4-MTHT) for corrosion and dissolution protection of mild steel in normal hydrochloric acid solution. The inhibiting efficiency of the different additives is evaluated by means of weight loss and electrochemical techniques such as ac impedance measurements and polarisation curves. The experimental results obtained reveal that 4-MTHT is the best effective inhibitor and the inhibition efficiency is found to be in the following order: 4-MTHT > 4-PHT > DHT. The variation in inhibitive efficiency mainly depends on the type and nature of the substituents present in the inhibitor molecule. Polarisation curves show that theses triazoles are mixed-type inhibitors in 1 M HCl. The inhibition efficiency increases with 4H-triazole derivatives concentration and attains the maximum value of 99.6% in the case of 4-MTHT at 5 × 10⁻⁴ M. The results obtained from weight loss electrochemical studies were in reasonable agreement. The adsorption of 4H-triazole derivatives on the steel surface obeys to the Langmuir isotherm model. The thermodynamic data of adsorption and activation are determined and discussed. The fundamental thermodynamic functions were used to glean important information about the 4H-triazoles inhibitory behaviour. Molecular modeling was used to get better insight, about structural and electronic effects in relation to the inhibition efficiencies.     

Microstructure evolution of WC/steel composite by laser surface re-melting

WC/steel composites fabricated by electro-slag melting and casting were re-melted by transverse flow CO₂ laser. Optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and transmission electron microscopy were used to analyze the microstructure evolution in laser melted layer. It was found that the laser-affected zone has three distinguished zones, the melted, transient and heat affected zone. The phases of the melted zone were composed of WC, Fe₃W₃C, (Cr,Fe)₇C₃, martensite and retained austenite. The microstructure evolution in the melted zone was represented by the transformation of three parts including the steel matrix, WC particles cluster and dispersed carbides. A significant reactant was herringbone eutectic carbide of Fe₃W₃C. The effect of laser scanning rate was mainly behaved in affecting the melt depth, microstructure of transient zone and dissolution of medium carbides. In comparison with the substrate, the melted zone has much higher microhardness.     

Influence of microsupersonic gas jets on nanosecond laser percussion drilling

This paper reports on etching rates and hole quality for nanosecond laser percussion drilling of 200-μm thick 316L stainless steel performed with micro supersonic gas jets. The assist-gas jets were produced using nozzles of 200, 300 and 500 μm nominal throat diameters. Air and oxygen were used separately for the process gas in the drilling trials and the drilling performance was compared to drilling in ambient conditions. The highest etch rate of 1.2 μm per pulse was obtained in the ambient atmosphere condition, but this was reduced by about 50% with assist-air jets from the 200 μm nozzle. Increasing the jet diameter and/or using oxygen assist gas also decreased the etching rate and increased the hole diameter. The 200 μm nozzle using air-assist jets produced the least amount of recast and gave the best compromise for etching rate. A combination of plasma shielding and different gas dynamic conditions inside the holes and at the surface are correlated to the observations of different drilling rates and hole characteristics.     

添加钇提高不锈钢耐蚀性能的AES研究

用俄歇能谱仪对比研究了添加０．２％Ｙ对高硅不锈钢在９３％Ｈ２ＳＯ４介质中所形成的钝化膜中各元素浓度分布的影响，添加０．２％Ｙ增大了ＳｉＯ２在不锈钢钝化膜中的比例，从而使合金中Ｓｉ可充分形成富ＳｉＯ２的钝化膜。     

Relationships between strain,microstructure and oxide growth at the nano‐ and microscale

In the present article, the relationships between oxidation processes, surface strains and the microstructure of duplex stainless steels were investigated. Specimens were oxidized at 500 °C under secondary vacuum for 1 h to form a thin oxide film (thickness in the range of 20–50 nm). Such specimens were considered as the model system for developing novel methods of analysis in understanding the behavior of passive films. The interfacial strain field after oxidation was measured experimentally at the microscale using the point grid method. On the other hand, the chemical composition of the oxide film was determined at the submicroscopic scale by means of local scanning Auger spectroscopy (with a spot diameter of 50 nm). Local variations of the chemical composition of the oxide film were analyzed according to the specimen microstructure and the strain field. Copyright © 2008 John Wiley & Sons, Ltd.     

Impact of sideband harmonic pattern on losses in laminated non-oriented steel

Losses in laminated non-oriented steel under the effect of two high harmonic clusters, caused by voltage excitation typical of two-level pulse-with-modulated (PWM) DC-link and space-vector modulated (SVM) matrix converters, were analyzed. The predicting method proposed, which incorporates anisotropy of loss K_a and grain size g_s, describes the magnetizing process within the steel by the means of Poisson statistical distribution. Results are then compared to losses determined by Bertotti's model. The two methods confirmed that spreading of sideband harmonics in the kilohertz range can reduce harmonic losses by up to 40% at low power frequencies.     

Laws of Influence of Structural Characteristics on the Strength and Crack Resistance of Aging Metallic Materials

The structural characteristics (the volume fraction, size, and shape of and the distance among hardening-phase particles) of aging alloys and steels, which define the behavior of the critical stress intensity factor during thermal hardening, are determined using the structural-mechanical approach we have developed. It is experimentally demonstrated for maraging steels that our approach is capable of proving the correlations of strength, plasticity, and crack- resistance with the structural characteristics, which were varied by changing the chemical composition of steel and thermokinetic aging conditions__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 94–101, January 2005.     

Surface analysis of a cold leg section of an SS316-lithium loop

Compatibility studies of austenitic stainless steel AISI 316 with liquid lithium for fusion application have shown that a porous ferritic layer is formed on the surface of the steel in the hot leg of a loop experiment due to depletion of alloying elements. The concentration profiles of the removed elements across the cross section of the tube reveal a pronounced step between the austenite matrix and the porous ferrite which is not expected in a normal diffusion process. The removed elements are partly deposited on the surface of the cold leg.In this study we looked at the boundary between the nickel rich deposit and the original matrix of a section of the cold (435 °C) leg. On the surface of the austenite, the expected grain boundary attack of lithium was observed. Additionally, to a depth of about one grain size, chromium and molybdenum were depleted and lithium seemed to also have attacked the bulk material, resulting in a splitting up into smaller grains with decomposed concentrations of the alloying elements, i.e. iron with large amounts of nickel and iron with chromium and small nickel amounts.In this paper a suggestion is put forward describing a reaction mechanism leading to the porous layer in the hot leg as a result of the instability of AISI 316 and its decomposition into two phases under the influence of liquid lithium.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

络合滴定法测定低压流体输送用镀锌焊接钢管镀锌层重量

介绍了利用络合滴定法测定低压流体输送用镀锌焊风管镀锌层重量的方法，试样用稀硫酸溶解，在ＰＨ１．５￣２．０的弱酸性介质中，以磺基水杨酸钠为指标剂，用ＥＤＴＡ滴定铁，调ＰＨ为５．５，以ＰＡＮ为指示剂，用ＥＤＴＡ滴定锌，由ＥＤＴＡ用量求出锌的重量，用ＧＢ／Ｔ３０９１－９３方法比较，试验结果满意。     

Development of nitride-layer of AISI 304 austenitic stainless steel during high-temperature ammonia gas-nitriding

Ammonia-gas nitriding of AISI 304 austenitic stainless steel was studied at temperatures higher than 800 °C using SEM and X-ray diffraction. The result showed that S-phase, an expanded austenite, was formed even at such high temperatures due to a high nitriding potential of ammonia gas. The equilibrium phase, CrN was formed through a decomposition of S-layer in two different modes; the one was through continuous precipitation of particles at the surface-side of S-layer due to a higher nitriding potential; the other through a discontinuous(-like) precipitation at the austenite interface-side, producing a fine lamellar structure of austenite and CrN. The γ-phase in the surface-side resulting from the precipitation of CrN particles subsequently transformed into Fe₄N because of a fast enrichment of N atoms and a limited mobility of Cr atoms at the surface-side. A coarse lamellar structure made of austenite and Cr₂N was developed in front of fine lamellae composed of austenite and CrN by the decomposition of supersaturated austenite through a discontinuous precipitation via grain boundary movement.