稀土及杂质元素对ZA27合金晶间腐蚀的影响

为了从本质上了解杂质与稀土元素对锌铝合金晶间腐蚀的影响 ,探索抑制合金晶间腐蚀的有效途径 ,依据晶界的大角度重位点阵理论编制出相应计算机软件 ,建立含稀土、杂质及 η相颗粒的α相大角度晶界原子集团模型 ,采用递归法计算了α相晶界间的电荷转移 ,由此讨论了杂质 (Pb、Sn、Cd)及稀土元素 (La、Y)对Zn、Al电极电位的影响 .结果表明 ,杂质Pb、Sn、Cd增大原子间的电荷转移量 ,提高Zn、Al电极电位差 ,加速合金的腐蚀 ,稀土元素减小原子间的电荷转移量 ,降低Zn、Al电极电位差 ,具有抑制晶间腐蚀的作用 .     

Surface diffusion of dysprosium on the W(1 1 1) facet

Diffusion of dysprosium on the (1 1 1) facet of a tungsten micromonocrystal was investigated by means of spectral analysis of field emission current fluctuations. The experimental spectral density functions of the current fluctuations were analysed by using Gesley and Swanson’s theoretical spectral density function, which enables to determine the surface diffusion coefficient D for dysprosium. Derived from the temperature dependence of D, the diffusion activation energy E is presented for some Dy coverages θ_(1 1 1). In the temperature range 400–600 K, the E first drops from 1.25 eV per atom at θ₍₁₁₁₎≈0.25 ML to 0.48 eV per atom at θ₍₁₁₁₎≈1 ML (corresponding to the minimum of the work function of the system), then increases to 1.03 eV per atom at θ₍₁₁₁₎≈1.3 ML. The results are discussed from the aspects of the substrate structure and interaction in the adsorbed layer.     

1×7锥形混合棒塑料光纤耦合器

利用光线追迹法进行数值仿真得到了锥形混合棒塑料光纤耦合器的分光比与其长度的关系.数值仿真表明:这种耦合器的分光比随锥形光波导长度增加,在0.143(即均分处)上下呈振荡型变化.选择一均分且分光比变化平缓的区域作为制作光波导的长度,通过拉伸粗的光波导棒成锥形且达到所需的长度,并采用精密的机械连接,制作出了1×7塑料光纤耦合器.测试数据表明:这种塑料光纤耦合器具有很高的均匀性.     

光复散射对消光法粒径测量的影响:复散射模型与数值模拟

复散射效应在光散射颗粒测量中不仅重要．且尚未得到很好解决。采用蒙特卡罗方法,对不同的光波长,颗粒浓度以及收接器条件下的光复散射进行了数值模拟．数值算法程序经与四通量模型进行对比验证,数值结果与单散射条件的郎伯-比尔模型进行比较．进而讨论了复散射效应对消光法颗粒粒径测量影响。表明复散射对消光法颗粒测量的影响不仅取决于颗粒系自身的浓度．而且接收器的几何尺寸和接收位置起着非常重要的作用,减小颗粒介质层厚度和减小光接收器接收面积．增大接收距离以及减小接收角都能减小复散射效应对消光法粒径测量的影响。     

A Novel UWB Antenna with Small Side-Leakage

A successful design for a UWB (ultra-wideband antennas) antenna based on NRD-guide (nonradiative dielectric waveguide) with small side-leakage is presented. The rule of the theoretical selection of its parameters, if NRD-guide is used as the UWB antennas, is studied firstly, then the temporal propagation characteristics of the NRD-guide and the radiation characteristics for an tapered open-ended NRD-guide are calculated by FDTD (finite-difference time-domain) method.     

Numerical calculation of cutoff frequencies of optical fibers by a variational technique

A numerical method for calculating cutoff frequencies of modes of weakly guiding optical fibers is described. Starting from a properly constructed field representation, the method follows a variational approach to obtain an eigenvalue problem for the cutoff frequencies which can be easily solved by a standard numerical routine. The field representation uses an expansion in terms of the Laguerre–Gauss functions in the fiber core and limiting form for small arguments of modified Bessel functions in the fiber cladding. Fibers with power-law refractive index profiles and fibers with a profile showing a dip on the axis are analyzed. Results obtained for modes of arbitrary order (both azimuthal and radial) show that our method is very efficient and accurate.     

Enantioseparation of flurbiprofen on amylose-derived chiral stationary phase by supercritical fluid chromatography

The separation of the enantiomers of flurbiprofen on an amylose-derived chiral stationary phase, Chiralpak AD-H, by supercritical fluid chromatography (SFC) under both linear and non-linear conditions is studied. Pulse injections were implemented using supercritical CO₂modified with methanol as a mobile phase at a temperature of 30 °$°$C. At linear conditions, the isotherm is determined directly from the chromatogram. Under overload conditions, the elution profiles were described by competitive Langmuir and bi-Langmuir isotherm. Isotherm parameters were estimated using the inverse method and the effects of operation variables such as pressure and modifier composition were studied. The value of selectivity is from 1.9 to 2.1 while the value of resolution is from 5.3 to 11.8. The number of theoretical plates is always greater than 5000 indicating high efficiency of SFC.     

2,4-二吡啶基方酸衍生物非线性光学性质的从头算研究

采用HF/4-31G方法优化分子几何构型,在此基础上用CPHF研究了系列2,4-二吡啶基方酸衍生物的二阶非线性光学系数βvec,并对影响βvec的因素进行了探讨.结果表明:此类化合物均有很大的βvec,它们的非线性光学性质与其分子结构有着密切的关系.     

电化学方法获得具有表面增强拉曼活性镍电极的研究

利用纯电化学手段获得了具有较强表面增强拉曼活性的镍电极, 改进了原有的镍电极表面预处理方法. 结果表明, 在0.5 mol/L的NaClO4溶液中, 结合电化学阶跃技术和循环伏安技术, 可以得到合适的粗糙镍电极; 同时, 还得到了探针分子吡啶在该粗糙镍电极表面随电极电位变化的表面增强拉曼光谱(SERS), 此时谱峰强度获得了极大的增强; 还研究了粗糙镍电极的扫描电子显微镜(SEM)图像, 并估算出其SERS增强因子约为104, 此结果比以前的镍电极表面粗糙方法所能达到的增强因子高一个数量级.     

以偏钛酸为原料常压水热法合成纳米钛酸锶

以廉价的工业级偏钛酸和氯化锶为原料,用常压水热法于100℃反应6 h一步合成了纳米钛酸锶。当n(SrC l2)∶n(H3TiO3)=1.0∶1.1,pH=12时,所得钛酸锶的n(Ti)∶n(Sr)=1.02∶1.00。纳米钛酸锶经IR,XRD和TEM表征。结果显示,钛酸锶为球形粒子,属立方晶系(a=3.9200);一次粒径平均值为22 nm,粒径分布为20 nm~40 nm,无明显团聚。