The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold

Three‐dimensional (3D) printing becomes an attractive technique to fabricate tissue engineering scaffolds through its high control on fabrication and repeatability using the printing parameters. This technique can be combined by the finite element method (FEM), and tissue‐specific scaffolds with desirable morphological and mechanical properties can be designed and manufactured. In this study, the influential 3D printing parameters on the morphological and mechanical properties of polycaprolactone (PCL) filament and scaffold were studied experimentally and numerically. First, the effects of printing parameters and process on the properties of extruded PCL filament were investigated. Then, using FEM, the effects of filament specifications on the overall characteristics of the scaffold were evaluated. Results showed that both the printing process in terms of resting time and remaining time and the printing parameters like pressure, printing speed, and printing path length have influenced the filament properties. In addition, both the filament diameter and elastic modulus had significant effects on the properties of scaffold especially, a 20% increase in the filament diameter caused the scaffold compressive elastic modulus to rise by around 72%. It is concluded that the printing parameters and process must be tuned very well in fabricating scaffolds with the desired morphology and mechanical property.     

Analytical method development and validation of anticancer agent, 5-fluorouracil,and its metabolites in biological matrices: An updated review

Abstract

5-fluorouracil (5-FU) refers to a fluorinated pyrimidine analogue that has been widely used as an anticancer agent for colon, head, and neck cancers. Detection of 5-FU and its metabolites; 5-fluorouridine and 5-fluoro-2-deoxyuridine in biological samples allows optimization of pharmacotherapy and encourages fundamental investigations of this medication. The development of accurate and reliable sample preparation, as well as analytical methods, is critical to isolate targeted analytes from complex matrices, apart from increasing detection sensitivity of analytes. With that, this paper presents a review of prior studies pertaining to chromatographic and electrophoretic methods that focused on the analysis of 5-FU and its metabolites in biological matrices such as plasma and urine. This paper concentrates on HPLC, GC and CE systems, which are the most commonly used strategies for analytical separation of 5-FU and its metabolites from samples. Detection of these antineoplastic agents at trace level demands highly sensitive and selective analytical methodologies. Application of these analytical techniques to biological matrices is reviewed with a focus on method development strategies, including types of mobile phases and background electrolytes employed in LC and CE systems.     

Effective synthesis of bicyclodienes via palladium-catalyzed asymmetric allylic alkylation and ruthenium-catalyzed cycloisomerization

[n.3.0]Bicycles (n = 3–6) can be synthesized using palladium-catalyzed asymmetric allylic alkylation followed by ruthenium-catalyzed cycloisomerization. New types of triarylphosphino-1,2-diaminooxazoline ligands show the same high levels of enantioselectivity observed with Trost ligand when employed in Pd-catalyzed allylic alkylation reactions. The enyne products of these allylic alkylation reactions were further elaborated using a Ru-catalyzed redox isomerization process, for which a mechanism is proposed.     

Toonapolyynes A–D,new polyynes from Toona ciliata

Abstract

Phytochemical investigation on the leaves and twigs of Toona ciliata has led to the isolation of four new polyynes (1–4) and two knowns (5 and 6). Their structures were determined by extensive spectroscopic analysis (MS, UV, IR, and NMR) and Mosher’s method. All compounds were evaluated for their inhibitory activities against HepG2 human tumor cell line but were inactive.     

Palladium‐Catalyzed C−H Iodination of Arenes by Means of Sulfinyl Directing Groups

C?H iodination of aromatic compounds has been accomplished with the aid of sulfinyl directing groups under palladium catalysis. The reaction proceeds selectively at the peri‐position of polycyclic aryl sulfoxides or at the ortho‐position of phenyl sulfoxides. The iodination products can be further converted via iterative catalytic cross‐coupling at the expense of the C?I and C?S bonds. Computational studies suggest that peri‐C?H palladation would proceed via a non‐directed pathway, wherein neither of the sulfur nor oxygen atom of the sulfinyl group coordinates to the palladium before and at the transition state.     

连续流动-分光光度法测定固体废物中氰化物浸出毒性的研究

建立了一种利用连续流动-分光光度法测定固废中氰化物的浸出毒性的方法,当氰化物浓度在0~200μg/L范围内,校准曲线的相关系数r为0.9998;方法的检出限可以达到0.33μg/L;不同浓度样品测定的相对标准偏差低于2.6%,实际固体废物样品加标回收率为96%~103%,方法精密度良好并且准确度较高;通过实际样品测定结果比对,证明方法与传统国家标准方法测定结果有着较高的吻合度,具有良好的应用前景。     

Contact vibration analysis of the functionally graded material coated half-space under a rigid spherical punch

This paper studies the contact vibration problem of an elastic half-space coated with functionally graded materials (FGMs) subject to a rigid spherical punch. A static force superimposing a dynamic time-harmonic force acts on the rigid spherical punch. Firstly, we give the static contact problem of FGMs by a least-square fitting approach. Next, the dynamic contact pressure is solved by employing the perturbation method. Lastly, the dynamic contact stiffness with different dynamic contact displacement conditions is derived for the FGM coated half-space. The effects of the gradient index, coating thickness, internal friction, and punch radius on the dynamic contact stiffness factor are discussed in detail.     

Snap-through path in a bistable dielectric elastomer actuator

The dielectric elastomer (DE) has attracted significant attention due to its desired features, including large deformation, fast response, and high energy density. However, for a DE actuator (DEA) utilizing a snap-through deformation mode, most existing theoretical models fail to predict its deformation path. This paper develops a new finite element method (FEM) based on the three-parameter Gent-Gent model suitable for capturing strain-stiffening behaviors. The simulation results are verified by experiments, indicating that the FEM can accurately characterize the snap-through path of a DE. The method proposed in this paper provides theoretical guidance and inspiration for designing and applying DEs and bistable electroactive actuators.     

基于光滑粒子流体动力学的滑油泵数值仿真

基于光滑粒子流体动力学方法,构建齿轮泵壳体及内部流体的粒子模型,对内啮合齿轮泵在不同工况下的流量特性进行数值模拟。首先设置了均匀分布的油泵出入口压强,计算得到的流量结果与试验结果吻合,且在中低转速下流量与转速呈线性关系;针对高转速下油泵流量降低的问题,通过适当减小周期模型内部的流体粒子数反映流量降低,获得了与试验值相吻合的连续转速流量的模拟结果;针对影响齿轮泵性能的间隙和空化现象,结合模型特点给出了相应的近似处理方法。通过以上研究,将SPH方法成功地应用于滑油泵问题的分析计算。     

滑坡冲击铲刮变量的计算方法研究

高速远程滑坡运动过程中,冲击铲刮效应不仅增加滑坡的体积与规模,而且会增大滑坡成灾范围,风险预测与判断出现明显误差,导致灾难性事件的发生。目前对于高速滑坡的铲刮深度、铲刮范围和铲刮体积等变量计算往往是采用基于经验的铲刮率算法,其是通过体积增量来反算铲刮变量的数学方法,而实际情况中高速滑坡的冲击铲刮是滑体冲击力和地表可铲刮材料之间的力学屈服破坏作用的结果。本文基于接触力学、弹塑性力学和岩土力学,提出了地表可铲刮层在附加冲击荷载作用下铲刮变量的理论计算方法,认为竖向冲击和切向剪切是滑体冲击铲刮过程的两种主要作用方式。结合实际岩土体材料参数,发现不考虑切向荷载时,铲刮层塑性区主要以竖向破裂区为主,考虑切向荷载时,铲刮层塑性区沿切向迁移,直至塑性边界贯通至地表,符合实际情况,实现了对铲刮变量的定量化计算。