Femtosecond laser microstructuring: an enabling tool for optofluidic lab‐on‐chips

This paper provides an overview of the rather new field concerning the applications of femtosecond laser microstructuring of glass to optofluidics. Femtosecond lasers have recently emerged as a powerful microfabrication tool due to their unique characteristics. On the one hand, they enable to induce a permanent refractive index increase, in a micrometer‐sized volume of the material, allowing single‐step, three‐dimensional fabrication of optical waveguides. On the other hand, femtosecond‐laser irradiation of fused silica followed by chemical etching enables the manufacturing of directly buried microfluidic channels. This opens the intriguing possibility of using a single laser system for the fabrication and three‐dimensional integration of optofluidic devices. This paper will review the state of the art of femtosecond laser fabrication of optical waveguides and microfluidic channels, as well as their integration for high sensitivity detection of biomolecules and for cell manipulation.     

Structure of liquid-vapor interface of square well fluid confined in a cylindrical pore

By means of the canonical Monte Carlo simulations, the vapor-liquid (VL) equilibrium and structure of square well (SW) fluids confined in a single cylindrical pore with repulsive surface, have been studied. Coexistence curves of the confined VL interface are determined for a wide range of temperatures and pore diameters. It is demonstrated that the confinement not only reduces the VL coexistence region but also induces strong inhomogeneities of the VL interface: coexistence liquid densities are different at the pore center and at the wall surface. It may be considered as a preliminary step for an isolated droplet formation inside the pore, as well as a tentative reason of the two VL phase transitions of simple fluids adsorbed into disordered porous media.     

利用偏最小二乘回归从冬小麦冠层光谱提取叶片含水量

通过人为控制灌溉水平,在冬小麦3个发育期(孕穗、开花、乳熟)测定了冠层光谱和叶片含水量(leaf water content,LWC)。针对每期数据,结合偏最小二乘回归和迭代特征去除,建立了基于诊断波段的LWC回归模型。结果表明,叶片水分的光谱响应及反演精度受小麦生长状态的影响。在孕穗、开花和乳熟3个发育阶段,回归模型中光谱数据的最佳利用形式分别为对数光谱、导数光谱和反射率光谱;重要光谱区间为SWIR,NIR和SWIR;模型交叉验证决定系数(R2_CV)为0.750,0.889和0.696。研究结论对今后监测冬小麦旱情和开发作物水分遥感产品具有重要的指导作用。     

短波近红外光谱法同时测定分析水中的麦芽糖、乳糖和蔗糖

用紫外-可见分光光度计的短波近红外光谱区域（800—1100nm）,测量了3种二糖麦芽糖、乳糖和蔗糖混合水溶液的近红外光谱,并用偏最小二乘方法建立了同时定量分析水溶液中麦芽糖、乳糖和蔗糖的模型,并对光谱数据预处理方法进行了讨论。通过对校正集样品的建模和对预测集样品的检验,结果良好。对浓度范围分别在0—60mg·L^-1,0—12mg·L^-1,0—60mg·L^-1的麦芽糖、乳糖和蔗糖预测模型相关系数分别为0.9904、0.9971和0.9926,模型交叉检验均方差分别为0.0213、0.2525和0.1859。预测集相对标准偏差分别为3.54%、3.55%和3.32%。并将此模型应用在简单成份的实际样品中进行了初步探索。该方法对同时定量分析多组分体系,具有简便、快速价廉、易于推广应用等优点。     

气体喷嘴反冲传输技术及在核科学中的应用

气体喷嘴反冲传输技术是继“跑兔”装置之后发展和完善起来的适合于短寿命核素研究的一种快速而有效的在线脱束方法。 它能够将短寿命核反应产物传输至远离高辐射区的低本底场所进行收集和测量。 该技术已在加速器和反应堆上得到了广泛的应用, 是一种研究核反应、 核谱学和合成与鉴别新元素、 新核素的一种不可缺少的基本实验技术和工具。 描述了气嘴系统的结构、 基本原理、 设计要求以及它的主要特性, 特别是对系统的气体动力学机制以及各种参数对系统特性的影响等进行了讨论。 最后, 综述了它在核物理、 核化学以及质谱学等领域的应用情况, 并且给出了几个应用的典型例子。 The gas jet recoil transport technique is developed and improved as a new rapid and effective on line and off beam method following “rabbit” apparatus in the study of short lives nuclei. It can transport the short half life nuclear reaction products far from high radioactive area for collection and measurement at low background area. This technique has been widely used in the researches with accelerator and reactor. It is indispensable basic experimental technology and tool applied to nuclear reaction, spectroscopy, as well as synthesis and identification of new elements and nuclei. The basic principle, structure, design requirement and main characteristics of gas jet system are described in this paper, especially the mechanism of gas dynamics and the effect of several parameters on the system properties are discussed. Finally, the applications of this technique in several fields such as nuclear physics, nuclear chemistry and mass spectroscopy etc. are comprehensively represented. Several typical applications are also illustrated.     

PEMFC气体扩散层干燥过程孔隙网络模拟

本文采用三维孔隙网络模型从孔隙尺度上对质子交换膜燃料电池气体扩散层中水分蒸发的干燥过程进行了模拟,并考虑了阴极流道的影响.计算结果表明毛细力在气体扩散层的干燥过程中起主要作用,气相从阴极流道底部开始,以沿气体扩散层厚度方向侵入为先,直到到达气体扩散层底部,随后气相才向流道肩部水平延伸侵入.蒸发速率随气体扩散层中水饱和度...     

x射线在毛细导管中传输的模拟计算

阐述了x射线在毛细导管中传输的基本理论，根据光线追迹原理建立了x射线在毛细导管中传输的计算模型.在此基础上使用MATLAB编写程序，实现了对x光经过x光单导管的传输效率和光强分布的模拟计算.计算结果和实验数据进行比较，得到了很好的符合. 关键词： 模拟计算 毛细导管 光线追迹 传输效率 光强分布     

光衍射法研究水表面波的性质

将水的表面波视作一种正弦相位型光栅,导出了水表面波衍射光斑间距与其波长的关系,从而利用水表面波对激光的衍射测定了水波波长,确定了表面波成分,即在所用实验频率范围内毛细波占主导地位,验证了表面波的色散关系.     

脉动热管的毛细管结构和尺度效应实验研究

脉动热管的毛细管结构变化如何影响其性能是研究者关注的问题.本文对毛细管截面为正方形和正三角形,水力直径范围为1 mm左右的回路型脉动热管的传热性能进行了实验研究.结果表明,角管脉动热管的倾角变化时,底加热明显优于顶加热;三角形截面脉动热管的热阻比正方形截面脉动热管的热阻更低.脉动热管在水力直径为1.5 mm时比1mm时的性能要好.实验研究为理论分析打下了基础.