MoO_3、NiO、ZnO在小表面金红石上的分散行为

氧化物、盐类在氧化物载体表面的自发分散是一种广泛存在的现象，文献中已报导过大量氧化物和盐类在高比表面载体上分散的研究结果［'－3］TIO。作为一种较新型的载体，与Y－AI。O。、硅胶等传统载体相比，有许多不同特性．活性组分在TIO。表面的分散状态及所得催化剂的性能已有不少报导［'－'］，但所用的TIOZ主要是较高比表面的锐钛矿型TIOZ（刘金红石型TIO。（r）和锐钛矿型TIOZ（a）的结构不同，它是高温生成相，比表面较小［'］．氧化物在金红石上的分散行为仍未见报导．我们制备了三种具有不同比表面的TIO水），系统地研…     

Polyelectrolyte microcapsules templated on poly(styrene sulfonate)-doped CaCO3 particles for loading and sustained release of daunorubicin and doxorubicin

A strategy to incorporate and release anti-cancer drugs of daunorubicin (DNR) and doxorubicin (DOX) in preformed microcapsules is introduced, which is based on charge interaction mechanism. Oppositely charged poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) were assembled onto PSS doped-CaCO₃ colloidal particles in a layer-by-layer manner to yield core-shell particles. After removal of the carbonate cores, hollow microcapsules with entrapped PSS were fabricated, which showed spontaneous loading ability of positively charged DNR and DOX. The drug loading was confirmed quantitatively by observations under confocal laser scanning microscopy, transmission electron microscopy and scanning force microscopy. Quantification of the drug loading was performed under different conditions, revealing that a larger amount of drugs could be incorporated at higher drug feeding concentrations and higher salt concentrations. However, putting additional polyelectrolyte layers on the microcapsules after core removal resulted in weaker drug loading efficiency. The drug release behaviors from the microcapsules with different layer numbers were studied too, revealing a diffusion controlled release mechanism at the initial stage (4 h).     

Investigation on spontaneous ignition of two kinds of organic material with water

A systematic investigation was performed to elucidate the cause of spontaneous ignition of Refuse Derived Fuel (RDF) and Meat Bone Meal (MBM). Heat generation in both RDF and MBM with addition of water liquid and vapor at room temperature was determined by isothermal calorimetry. Compared with water liquid, the heat of wetting by sorption of water vapor at 80% relative humidity and 25 °C was larger, which can raise the temperature of RDF and MBM more than 30 and 56 °C, respectively. Heat generation due to fermentation occurred and the temperature of RDF and MBM reached or exceeded 80 °C after 5 days for RDF and 4 days for MBM at 100% RH. The spontaneous ignition for RDF and MBM results from heat of wetting and fermentation at room temperature and a further exothermic reaction at higher temperature.     

某些有机物在氧化物载体表面的自发单层分散

自发单层分散原理已在载负型催化剂制备、再生等方面得到越来越广泛的应用[1，2]．许多氧化物和盐类可以在载体表面形成单层分散或亚单层分散．有些分散物与载体混合后在低于其熔点的温度下处理，就可以自发分散到载体表面[1，3]．这一现象通过XRD、LRS、XPS、SIMS、ISS、EXAFS     

Conducting polymer membranes for low activity potentiometric ion sensing

Conducting polymer (CP) films, used as ion-sensing membranes under open circuit potentiometric conditions, are usually characterised with rather high detection limit, in the range of 10⁻⁴-10⁻⁵ mol dm⁻³. This effect is unfavourable, not only from the point of view of CP applications in potentiometry as ion sensitive membranes, but also when these materials are used as ion-to-electron transducers (solid contacts) for ion-selective electrodes. The theoretical considerations presented underline the crucial role of spontaneous processes of polymer charging/discharging—the source of observed high detection limit of sensors comprising CP layer under zero current conditions. Although the mechanism of occurring process is different from that observed for plastic, solvent polymeric based ion-selective electrodes, the ultimate result—alteration of activity of electrolyte at the membrane/solution interface leading to elevation of the detection limit—is the same.The method of estimation of parameters characterising spontaneous charge transfer processes is presented. The values obtained can be used to calculate the resulting polymer/solution interface activity of electrolyte ions, thus the detection limit of CP membrane can be theoretically predicted.A method of lowering of the detection limit of conducting polymer membranes, applying galvanostatic polarisation to compensate the spontaneous process of polymer charging/discharging, is presented.The experimental results obtained for poly(pyrrole), poly(N-methylpyrrole) and poly(3,4-ethylenedioxythiophene) are in good accordance with predictions of the presented model.     

Thermodynamic issues associated with combined cyclic voltammetry and wafer curvature measurements in electrolytes

A thermodynamic framework has been provided for the interpretation of combined cyclic voltammetry and surface stress measurements, the latter being obtained from wafer curvature or beam deflection measurements of a solid electrode as a function of applied potential (so-called voltstressograms). Firstly, the derivation of electrocapillarity equations for solid electrodes has been critically reviewed by starting from the Gibbs adsorption equation appropriate for solid–electrolyte interfaces. This allowed us to demonstrate the critical importance of elastic surface strain in the thermodynamic boundary conditions of the partial derivatives intervening in the interpretation of voltstressograms. From these considerations, it was shown for the first time that the electrocapillarity equations for solid electrodes are not appropriate for describing the variation of surface stress with potential obtained from wafer curvature measurements, because such measurements are intrinsically incompatible with the constant strain condition implied in the electrocapillarity equations. An alternative explanation is provided for the experimentally observed proportionality between the current density, measured in cyclic voltammograms, and the first derivative of surface stress with respect to potential, obtained from voltstressograms.     

Hypersurfaces of prescribed mean curvature enclosing a given body

Given a smooth domain Ω in ℝ ^m+1 with compact closure and a smooth integrable functionh: ℝ ^m+1→ℝ satisfyingh(x)≥H _∂Ω (x) on ∂Ω whereH _∂ω denotes the mean curvature of ∂Ω calculated w.r.t. the interior unit normal we show that there is a setA⊂ℝ ^m+1 with the properties andH _∂A=h on ∂A.     

Twist-bend nematics,liquid crystal dimers,structure–property relations

ABSTRACT

One of the current challenges in liquid crystal science is to understand the molecular factors leading to the formation of the intriguing twist-bend nematic phase (N_TB) and determine its properties. During our earlier hunt for the N_TB phase created on cooling directly from the isotropic phase and not the nematic phase, we had prepared 30 symmetric liquid crystal dimers. These had odd spacers and methylene links to the two mesogenic groups; desirable but clearly not essential features for the formation of the N_TB. Here, we report the phases that the dimers exhibit and their transition temperatures as functions of both the lengths of the spacer and the terminal chains. In addition we describe the transitional entropies, their optical textures, the X-ray scattering patterns and the ²H NMR spectra employed in characterising the phases. All of which may lead to important properties of the twist-bend nematic phase.     

Binary hairy nanoparticles: Recent progress in theory and simulations

Binary polymer brushes, including mixed homopolymer brushes and diblock copolymer brushes, are an attractive class of environmentally responsive nanostructured materials. Owing to microphase separation of the two chemically distinct components in the brush, multifaceted nanomaterials with functionalized and patterned surfaces can be obtained. This review summarizes recent progress on the theory and simulations related to binary polymer brushes grafted to flat, spherical, and cylindrical substrates, with a focus on patterned morphologies of multifaceted hairy nanoparticles, an intriguing class of hybrid nanostructured particles (e.g., nanospheres and nanorods). In particular, powerful field theory and particle-based simulations suitable for revealing novel structures on these patterned surfaces, including self-consistent field theory and dissipative particle dynamics simulations, are emphasized. The unsolved yet critical issues in this research field, such as dynamic response of binary polymer brushes to environmental stimuli and the hierarchical self-assembly of binary hairy nanoparticles, are briefly discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1583–1599