Dynamic surface tension of micellar solutions studied by the maximum bubble pressure method

A theoretical model for the dynamic surface tension of an air bubble expanding in micellar surfactant solution is proposed. The model accounts for the effect of expansion of the bubble surface during the adsorption of surfactant molecules (monomers) and the effect of disintegration of polydisperse micelles on the surfactant diffusion. Assuming small deviations from equilibrium and constant rate of expansion analytical expression for the surface tension and the subsurface concentration of monomers as a function of time is derived. The characteristic time of micellization is computed from the experimental data for two surfactants (sodium dodecyl sulfate and nonylphenol polyglycol ether) obtained by the maximum bubble pressure method.     

Magnetic resonance imaging in laboratory petrophysical core analysis

Magnetic resonance imaging (MRI) is a well-known technique in medical diagnosis and materials science. In the more specialized arena of laboratory-scale petrophysical rock core analysis, the role of MRI has undergone a substantial change in focus over the last three decades. Initially, alongside the continual drive to exploit higher magnetic field strengths in MRI applications for medicine and chemistry, the same trend was followed in core analysis. However, the spatial resolution achievable in heterogeneous porous media is inherently limited due to the magnetic susceptibility contrast between solid and fluid. As a result, imaging resolution at the length-scale of typical pore diameters is not practical and so MRI of core-plugs has often been viewed as an inappropriate use of expensive magnetic resonance facilities. Recently, there has been a paradigm shift in the use of MRI in laboratory-scale core analysis. The focus is now on acquiring data in the laboratory that are directly comparable to data obtained from magnetic resonance well-logging tools (i.e., a common physics of measurement). To maintain consistency with well-logging instrumentation, it is desirable to measure distributions of transverse (_T2$T_2$) relaxation time–the industry-standard metric in well-logging–at the laboratory-scale. These _T2$T_2$ distributions can be spatially resolved over the length of a core-plug. The use of low-field magnets in the laboratory environment is optimal for core analysis not only because the magnetic field strength is closer to that of well-logging tools, but also because the magnetic susceptibility contrast is minimized, allowing the acquisition of quantitative image voxel (or pixel) intensities that are directly scalable to liquid volume. Beyond simple determination of macroscopic rock heterogeneity, it is possible to utilize the spatial resolution for monitoring forced displacement of oil by water or chemical agents, determining capillary pressure curves, and estimating wettability. The history of MRI in petrophysics is reviewed and future directions considered, including advanced data processing techniques such as compressed sensing reconstruction and Bayesian inference analysis of under-sampled data. Although this review focuses on rock core analysis, the techniques described are applicable in a wider context to porous media in general, such as cements, soils, ceramics, and catalytic materials.     

High-pressure NMR study of water exchange on magnetic resonance imaging contrast agents

Abstract

The knowledge of water exchange reaction mechanism in aqueous solutions of Gd³⁺ polyaminocarboxylates is important for the understanding of the relatively slow water exchange rates measured for these complexes. Variable ressure measurements show a change of mechanism from associatively activated on [Gd(H₂O)₈]³⁺ and [Gd(PDTA)(H₂O₂)₂]^? to probably limiting dissociative on the MRI contrast agents [Gd(DOTA)(H₂O)]^?, [Gd(DTPA)(H₂O)]^2? and [Gd(DTPA-BMA)(H₂O)].     

AgAlSe2晶体高压相变的第一性原理研究

基于密度泛函理论,采用广义梯度近似法,研究了黄铜矿结构AgAlSe₂在高压下的晶体结构、晶格动力学稳定性与电子结构.结果显示:在0 GPa时AgAlSe₂的晶格参数与实验值吻合,在13.9 GPa附近,质量密度、Se-Ag键长、Se-Al键长、晶格常数a突然增大,相对晶胞体积V/V₀、晶格常数c突然减小,声子谱出现虚频,结构变得不稳定,带隙发生突变,数值呈减小趋势.表明AgAlSe₂晶体在13.9 GPa附近发生结构相变.该研究为AgAlSe₂晶体在理论上所能承受的高压提供信息支撑.     

Pressure effect on grain boundary wetting at various temperatures

Bicrystals of Fe-6 at.% Si alloy containing <001> 5 tilt grain boundaries with a deposited zinc layer have been annealed at various hydrostatic pressure at four temperatures between 700° and 905°C. After the anneals the dihedral angle of the grain boundary groove formed at the site of the grain boundary intersection with the solid-melt interphase boundary has been measured. The transition from complete to incomplete wetting of the grain boundary by the zinc-rich melt (dewetting phase transition) has been found to occur as the pressure increased at all temperatures studied. The temperature dependence of the dewetting transition pressure p _w has been determined. That dependence has a minimum at a temperature of 790°C, which is close to the peritectic temperature in the Fe–Zn system (782°C). A thermodynamic analysis of the wetting phenomena in the two-component system, based on Becker's regular solution model for the surface tension of the interphase boundary, explains the minimum in the p _w (T) dependence.     

Method for direct measurement of the film tension of black foam films at various capillary pressures

A new experimental method to directly measure the film tension of black foam films is developed on the basis of the Laplace equation. The method allows the determination of the tension of curved (spherical) films with various radii and capillary pressures. Measurements with Newton black films from sodium dodecyl sulphate aqueous solution have been carried out. The results show that in the studied range of curvature radii (70 ÷ 360 m) the film tension does not depend on the curvature and the capillary pressure.     

常压微波等离子体炬装置的模拟与设计

介绍了一台低成本的常压微波等离子体炬设备,给出了该设备构造及喷嘴的设计思路,分析了各种气体的非磁化微波等离子体的击穿电场强度,数值求解了设备中矩形TE103谐振腔中的电磁场分布,应用高频电磁场模拟分析软件HFSS优化了喷嘴在波导中的具体位置,并对优化后喷嘴周围的电场分布进行了模拟。模拟结果表明：微波输入有效功率为500 W,喷嘴伸出矩形波导1 mm时,喷嘴尖端处的电场强度在1.2×106 V·m-1以上,远大于氩气的击穿电场强度,更易于等离子体炬的激发。实验结果证明了模拟结果的正确性和装置的有效性。     

分子的飞秒强光电离

文章以一个实验者的角度,介绍了分子的飞秒强光电离的研究现状.文章从对比飞秒激光电离质谱与纳秒激光电离质谱开始,接着介绍分子在激光场作用下的可能电离机理,着重描述了几个处理分子场致电离的理论模型和实验验证,最后对飞秒激光导致的分子在激光脉冲作用后取向研究进行了简单介绍.     

Pressure-induced structural phase transition and electronic properties of RESb (RE = Ho,Er and Tm) compounds: ab initio calculations

The structural phase transition and electronic properties at ambient (B ₁-phase) and high pressure (B ₂-phase) of heavy rare earth monoantimonides (RESb; RE?=?Ho, Er, and Tm) have been studied theoretically using the self-consistent tight binding linear muffin tin orbital method. These compounds show metallic behavior under ambient condition and undergo a structural phase transition to the B ₂ phase at high pressure. We predict a structural phase transition from the B ₁ to B ₂ phase in the pressure range 30.0–35.0?GPa. Apart from this, the ground state properties, such as lattice parameter and bulk modulus are calculated and compared with the available theoretical and experimental results.     

Effect of Extraction Methods and In Vitro Bio-Accessibility of Microencapsulated Lemon Extract

The extraction of bioactive compounds from fruits, such as lemon, has gained relevance because these compounds have beneficial properties for health, such as antioxidant and anticancer properties; however, the extraction method can significantly affect these properties. High hydrostatic pressure and ultrasound, as emerging extraction methods, constitute an alternative to conventional extraction, improving extractability and obtaining extracts rich in bioactive compounds. Therefore, lemon extracts (LEs) were obtained by conventional (orbital shaking), ultrasound-assisted, and high-hydrostatic-pressure extraction. Extracts were then microencapsulated with maltodextrin at 10% (M10), 20% (M20), and 30% (M30). The impact of microencapsulation on LEs physicochemical properties, phenolics (TPC), flavonoids (TFC) and relative bio-accessibility (RB) was evaluated. M30 promoted a higher microencapsulation efficiency for TPC and TFC, and a longer time required for microcapsules to dissolve in water, as moisture content, water activity and hygroscopicity decreased. The RBs of TPC and TFC were higher in microcapsules with M30, and lower when conventional extraction was used. The data suggest that microencapsulated LE is promising as it protects the bioactivity of phenolic compounds. In addition, this freeze-dried product can be utilized as a functional ingredient for food or supplement formulations.