A comparative study of the thermal reactivities of some transition metal oxalates in selected atmospheres

A comparative investigation has been made of the nonisothermal, solid-state thermal decompositions of the oxalates of six divalent transition metals (cations: manganese, iron, cobalt, nickel, copper and zinc) in alternative flowing atmospheres, inert (N₂, CO₂), reducing (H₂) and oxidizing (air). Derivative thermogravimetry (DTG) and differential scanning calorimetry (DSC) response peak maxima, providing a measure of reaction temperatures, have been used to determine salt reactivities and thus to characterize the factors that control the relative stabilities of this set of chemically related reactants. Two trends were identified. Trend (1): in the inert and reducing atmospheres, the decomposition temperature (salt stability) increased with rise in enthalpy of formation of the divalent transition metal oxide, MO. It is concluded that the rupture of the cation-oxygen (oxalate) bond is the parameter that determines the stability of salts within this set. Trend (2): the diminution of decomposition temperatures from values for reactions in inert/reducing atmosphere to those for reactions in an oxidizing atmosphere increased with the difference in formation enthalpy between MO and the other participating oxide (MO_3/2 or MO_1/2). The change of cation valence tended to promote reaction, most decompositions in O₂ occurred at lower temperatures, but the magnitude of the effect varied considerably within this set of reactants. Observed variations in stoichiometric and kinetic characteristics with reaction conditions are discussed, together with the mechanisms of thermal decompositions of these solid oxalates.This approach to the elucidation of crystolysis reaction mechanisms emphasizes the value of comparative investigations within the group of chemically related reactants. Previous isothermal kinetic studies had been made for each of the reactants selected here. From these, much has been learned about the form of the (isothermal) solid-state yield-time curves, often interpreted to provide information about the geometry of interface development for the individual rate processes. However, identification of the controls of reactivity, reaction initiation (nucleation) and advance (nucleus growth), is much more difficult to characterize and less progress has been made towards elucidation of the interface chemistry. The trends of reactivity changes with salt compositions, identified here, offer a complementary approach to that provided by the study of single salts. Much of the recent literature on thermal decompositions of solids has been concerned with individual reactants, but many results and conclusions are not presented in the widest possible perspective. Comparisons between systematically related reactants are identified here as providing a chemical context for the elucidation of the chemical steps that participate in interface reactions. The article advocates the use of a more chemical approach in investigations of crystolysis (solid-state chemical) reactions.     

Spin Density Distribution in 2,4,6-Triphenylphenoxyl

The distribution of the unpaired electron over the oxygen and the 24 carbon atoms in the free 2,4,6-triphenylphenoxy radical was determined by electron spin resonance spectroscopy and quantum-mechanical approximation methods. The hyperfine splitting was evaluated with the aid of the spectra of triphenylphenoxyls deuterated in some or all of the substituent phenyl groups. The results of the quantum-mechanical approximations were checked by recording the ESR spectra of triphenylphenoxyls labeled with ¹³C in positions 1,2,3, or 4 of the central ring. The spin density distribution permits a first discussion of the ¹⁷O-coupling constants of correspondingly labeled triphenylphenoxyl and other organic free radicals.     

Differentiation of Boc- alpha,beta- and beta,alpha-peptides and a pair of diastereomeric beta,alpha-dipeptides by positive and negative ion electrospray tandem mass spectrometry (ESI-MS/MS)

Positive and negative ion electrospray ionization (ESI) tandem mass spectral study of a new series of hybrid peptides, viz, BocN-alpha,beta-peptides and BocN-beta,alpha-peptides, synthesized from C-linked carbo-beta3-amino acids [Caa (S)] and L-Ala has been carried out. The alpha,beta-peptides have been differentiated from beta,alpha-peptides by the collision-induced dissociation (CID) of [M + H]+ and [M - H]- ions in positive and negative ion ESI-MS respectively. The fragment ion [M + H - C(CH3)3 + H]+ formed from [M + H]+ ions by the loss of 2-methyl-prop-2-ene in alpha,beta-peptides with L-Ala at the N-terminus is insignificant or totally absent for beta,alpha-peptides which have the Caa (S) at N-terminus. The fragment ion [M - H-C(CH3)3OH - HNCO]- formed from [M - H]- of beta,alpha-peptide acids is totally absent for alpha,beta-peptide acids. This has been attributed to the absence of the beta-methylene group in alpha,beta-peptides, and the participation of the beta-methylene group in the loss of HNCO in beta,alpha-peptide acids is confirmed by the deuteration experiments. The CID of [M + H-Boc + H]+ ions of these peptides also produce characteristic fragmentation. In the CID spectra of alpha,beta-peptides, the b(n)+ ions and the resulting y(n)+ ions occur at a mass difference of 243 and 71 Da corresponding to the successive losses of Caa and L-Ala, whereas a mass difference of 71 and 243 Da is observed for beta,alpha-peptides. In contrast to the CID of protonated peptides, the CID of [M - H]- ions of the alpha,beta- and beta,alpha-peptide acids do not give b(n)- ions and show abundant z(n) (-) ions. Further, a pair of diastereomeric dipeptide esters and acids have been distinguished by the CID of [M + H]+ ions. The loss of 2-methyl-prop-2-ene is more pronounced for Boc-NH-Caa(R)-D-Ala-OCH3 (21) and Boc-NH-Caa(R)-D-Ala-OH (23) with Caa (R) at the N-terminus, whereas it is totally absent for Boc-NH-Caa (S)-D-Ala-OCH3 (22) and Boc-NH-Caa(S)-D-Ala-OH (24) peptides, which have Caa (S) at the N-terminus. Thus, on the basis of our previous and present studies, we propose that the CID of [M + H]+ ions provides a simple and useful method for distinguishing the configuration of Caa (S or R) at the N-terminus of BocN-carbo beta,alpha- and beta,beta-dipeptides.     

The new facial tripod ligand 3,3-bis(1-methylimidazol-2-yl)propionic acid and carbonyl complexes thereof containing manganese and rhenium

The new facially coordinating tripod ligand 3,3-bis(1-methylimidazol-2-yl)propionate (bmip) has been studied. A synthetic route to sodium 3,3-bis(1-methylimidazol-2-yl)propionate (Na[bmip], 2a) and its hydrochloride (Hbmip · 2HCl, 2b) is reported. The electronic properties of Hbmip were calculated by DFT methods and are compared to those of structurally similar bis(pyrazol-1-yl)acetic acids. The ligand was applied in the synthesis of the two tricarbonyl complexes [Re(bmip)(CO)₃] (3) and [Mn(bmip)(CO)₃] (4). Methyl 3,3-bis(1-methylimidazol-2-yl)propionate (bmipme) (1), which is the precursor of Hbmip, and the complexes [Re(bmip)(CO)₃] (3) and [Mn(bmip)(CO)₃] (4) were characterised by single crystal X-ray analysis.     

Co‐Conformational Distribution of Nanosized [2]Catenanes Determined by Pulse EPR Measurements

The co‐conformational ensembles of three differently sized [2]catenanes were studied by measuring pair correlation functions corresponding to the separation of nitroxide spin labels—one attached to each of the two macrocycles—with the double electron–electron resonance (DEER) experiment. A geometric model for the [2]catenanes was derived that approximates the macrocycles by circles and takes into account the topological constraint. Comparison of the experimental to the theoretically predicted pair correlation functions gives insight into the co‐conformational distribution and the size of the macrocycles. It was found that the macrocycles of the medium‐ and large‐sized catenanes in chloroform are close to fully expanded, while they are partially collapsed in glassy o‐terphenyl. For the small‐sized catenane, moderate interaction between the unsaturated sections of the macrocycles in chloroform is indicated by a slight overrepresentation of short label‐to‐label separations in the pair correlation function.     

A novel phosphoramidite method for automated synthesis of oligonucleotides on glass supports for biosensor development

Two protocols for functionalization of glass supports with hexaethylene glycol (HEG)-linked oligonucleotides were developed. The first method (standard amidite protocol) made use of the 2-cyanoethyl-phosphoramidite derivative of 4,4′-dimethoxytrityl-protected HEG. This was first coupled to the support by standard solid-phase phosphoramidite chemistry followed by extension with a thymidylic acid icosanucleotide. Stepwise addition of the linker phosphoramidite graduated at 1% (relative to the total sites available) perstep at 50°C resulted in an optimal yield of immobilized oligonucleotides at a density of 2.24 × 10¹⁰ strands/mm². This observed loading maximum lies well below the theoretical maximum loading owing to nonspecific adsorption of HEG on the glass and subsequent blocking of reactive sites. Surface loadings as high as 3.73 × 10¹⁰/mm² and of excellent sequence quality were achieved with a reverse amidite protocol. The support was first modified into a 2-cyanoethyl-N,N-diisopropylphosphoramidite analog followed by coupling with 4,4′-dimethoxytrityl-protected HEG. This protocol is conveniently available when using a conventional DNA synthesizer. The reverse amidite protocol allowed for control of the surface loading at values suitable for subsequent analytical applications that make use of immobilized oligonucleotides as probes for selective hybridization of sample nucleic acids of unknown sequence and concentration.     

Microwave-assisted conversion of N-substituted oxazolidin-2,4-diones into α-hydroxyamides

N-Substituted oxazolidin-2,4-diones have been synthesized in a novel one-pot reaction by reacting cyanohydrins stepwise with 1,1′-carbonyldiimidazole and primary amines followed by acidic hydrolysis of the intermediate 4-imino-oxazolidin-2-ones. Their microwave-assisted conversion into α-hydroxyamides was accomplished by treatment with catalytic amounts of sodium methoxide in methanol.     

Solvation of uranyl(II), europium(III) and europium(II) cations in "basic" room-temperature ionic liquids: a theoretical study

We report a molecular dynamics study of the solvation of UO2(2+), Eu3+ and Eu2+ ions in two "basic" (Lewis acidity) room-temperature ionic liquids (IL) composed of the 1-ethyl-3-methylimidazolium cation (EMI+) and a mixture of AlCl4- and Cl- anions, in which the Cl-/AlCl4- ratio is about 1 and 3, respectively. The study reveals the importance of the [UO2Cl4]2- species, which spontaneously form during most simulations, and that the first solvation shell of europium is filled with Cl- and AlCl4- ions embedded in a cationic EMI+ shell. The stability of the [UO2Cl4]2- and [Eu(III)Cl6]3- complexes is supported by quantum mechanical calculations, according to which the uranyl and europium cations intrinsically prefer Cl- to the AlCl4- ion. In the gas phase, however, [Eu(III)Cl6]3- and [Eu(II)Cl6]4- complexes are predicted to be metastable and to lose two to three Cl- ions. This contrasts with the results of simulations of complexes in ILs, in which the "solvation" of the europium complexes increases with the number of coordinated chlorides, leading to an equilibrium between different chloro species. The behavior of the hydrated [Eu(OH2)8]3+ complex is considered in the basic liquids; the complex exchanges H2O molecules with Cl- ions to form mixed [EuCl3(OH2)4] and [EuCl4(OH2)3]- complexes. The results of the simulations allow us to better understand the microscopic nature and solvation of lanthanide and actinide complexes in "basic" ionic liquids.     

Silica-Based and Transition Metal-Based Inorganic-Organic Hybrid Materials—A Comparison

Organically substituted metal alkoxides can be prepared by reaction of the parent alkoxides with complexing organic compounds. The chemical and structural consequences of such substitutions are discussed in this article. Examples are given showing how functional organic moieties, such as polymerizable groups, can be incorporated into sol-gel materials via the complexing ligands. Major structural differences between silica-based and metal-based hybrid materials originate from the different charge/coordination number ratios of silicon and most metals. This results in a high tendency for the molecular building blocks to aggregate. In many cases, metal oxide clusters are formed which are capped by the organic ligands. Such surface-modified clusters are themselves very valuable condensed matter units for materials syntheses.