The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

Optimisation of the chlorthalidone chiral separation by capillary electrochromatography using an achiral stationary phase and cyclodextrin in the mobile phase

The separation of chlorthalidone enantiomers in capillary electrochromatography on an achiral stationary phase when adding a chiral selector, hydroxypropyl-β-cyclodextrin, to the mobile phase, was optimised. The goal was to investigate the feasibility of modelling retention times and resolution when during the optimisation procedure regular replacement of columns is required due to their fragility. Therefore, it is essential that the packing procedure delivers reproducible columns. The optimisation of an existing chlorthalidone separation was chosen as case study. The influence of two factors, chiral selector concentration and organic modifier content, on the responses was modelled. The experiments performed prior to modelling were defined by a central composite design. Results on different columns, obtained under identical experimental conditions, were found comparable and thus modelling was possible in situations where several columns were required to complete a design. A second-order polynomial model was built for both responses. Optimal separations were also predicted using Derringer’s desirability functions. The optimum was found at 33 mM cyclodextrin and 16% (v/v) acetonitrile on two types of columns (with different packing times) leading to a strong reduction in analysis time for an equally good separation compared to the initial conditions. Measured and predicted responses were found comparable, indicating that acceptable models were obtained.     

Coupled-column liquid chromatography method with photochemically induced derivatization for the direct determination of benzoylureas in vegetables

The coupled-column (LC-LC) system, consisting of a first column packed with internal surface reversed phase (ISRP) (50 x 4.6mm ID) and a Chrompack C18 (100 x 4.6 mm ID) as second column, allowed the simultaneous determination of five benzoylurea insecticides in dichloromethane (CH2Cl2) extracts of vegetable samples without any clean-up step. This system was combined with a photochemically induced fluorescence (PIF) post-column derivatization in order to provide strongly fluorescent photoproducts from the non-fluorescent benzoylureas. Limits of detection ranged from 0.21 to 0.98 microg L(-1) of pesticide (equivalent to 0.14-0.65 microg kg(-1) in vegetable samples) and limits of determination ranged from 4.0 to 10.0 microg L(-1) (equivalent to 2.7-6.7 microg kg(-1)). Linearity of the method was established between 2 and 1800 microg L(-1), depending upon the compound. Validation of the total method was performed by randomly analyzing recoveries of four vegetable samples (aubergine, cucumber, green bean, and tomato) spiked at two levels of concentration (10.0 and 33.3 microg kg(-1)). The combination of the LC-LC system with PIF detection provides a sensitive, selective, and rapid method for the determination of pesticides in vegetable samples at levels lower than the maximum residue levels (MRLs) established for these compounds by Spanish legislation.     

Preparative Separation and Analysis of Complex Mixtures of Leucomycins and Desmycarosyl Leucomycins Using HPLC and Mass Spectrometry

Composition and hydrolysis products of a biotechnical available complex of macrolides were analyzed by HPLC and ESI-CID-MSⁿ. Major components are leucomycin-type antibiotics (leucomycins A₁ (5), A₇ (3), A₉ (2), 9-desoxy-9-oxo-turimycin H₃ (4) and niddamycin B (6). Hydrolysis of the complex mixture yielded 9-, 13-isoforocidins (7, 8, 9, 11) and 9-oxo-forocidin (10). A preparative separation procedure was elaborated furnishing compounds 3 - 11 for semisynthetic experiments.Prof. Dr. Udo Gräfe deceased on 14.2.2003. For obituarity see: Schlegel B (2003) J Peptide Sci 9: 661–661.     

端羟基芳香酯二醇扩链的聚氨酯－酯的DSC研究

端羟基芳香酯二醇扩链的聚氨酯－酯的ＤＳＣ研究陈静，余学海，杨昌正（南京化工学院应化系南京２１０００９）（南京大学化学系南京２１００９３）关键词嵌段聚醚聚氨酯－酯，结晶性，微观相结构，差示扫描量热法，形态结构众所周知，聚氨酯嵌段共聚物是一类结构特殊、用...     

New breathable and waterproof coatings for textiles: effect of an aliphatic polyurethane on the formation of PEEK-WC porous membranes

PEEK-WC is an amorphous polyetheretherketone with high chemical stability, excellent thermal resistance and significant solubility in various solvents. It has been used to prepare flat membranes by the phase inversion technique. The water vapour permeability through a porous PEEK-WC film was 1350 g/m² day at 26 °C and its liquid entry pressure (LEP) of water equivalent to a column of 2.0 m. These values were remarkably improved by addition of an aliphatic ether polyurethane (PU) into the PEEK-WC/DMF dopes: the water vapour flux was increased up to 2000 g/m² day and the LEP was equivalent to 12.5 m. This improvement is correlated to the different structure of the membranes: a spongy, porous and almost symmetric structure for the PEEK-WC/PU membranes, and an asymmetric structure with fingers for PEEK-WC membrane. The presence of PU influences also the mechanical properties of the blend membranes. The role of the PU on the resulting membrane morphology is rationalised on the basis of the mechanism of phase separation.     

Production of oxygen enriched air by rapid pressure swing adsorption

A novel rapid pressure swing adsorption (RPSA) process is described for production of 25–50% oxygen enriched air. The embodiment consists of one or more pairs of adsorbent layers contained in a single adsorption vessel. The layers undergo simultaneous pressurization-adsorption and simultaneous depressurization-purge steps. A total cycle time of 6–20 seconds is used. The process yields a very large specific oxygen production rate and a reasonable oxygen recovery for production of 20–50 mole% oxygen enriched gas.It is demonstrated by a simple mathematical model of isothermal single adsorbate pressure swing ad(de)sorption concept on a single adsorbent particle that the specific production rate of a PSA process cannot be indefinitely increased by reducing the cycle time of operation when adsorbate mass transfer resistances are finite.     

联苯二酐型聚酰亚胺的透气性能与分子结构关系的研究

联苯二酐型聚酰亚胺的透气性能与分子结构关系的研究李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚酰亚胺，膜，气体分离，透气性，透气选择性联苯二酐（ＢＰＤＡ）型聚酰亚胺具有较高的透气选...     

合成高分子膜透气速率的温度依赖性

近年来以气体选择性分离为目的的合成高分子膜的研究取得了巨大的进步。气体分离膜的两个基本性能参数是透气速率J及选择系数α。同一个膜,在较高温度使用时,往往是J值增大,α值下降,因此选择适当地操作温度,以便得到最佳的J-α搭配是很重要的。本文讨论了甲基硅橡胶(MSR)、天然橡胶(NR)、乙丙橡胶(EPR)、聚乙烯(PE)、聚(4-甲基戊烯-1)(TPX)等材料的均质膜或复合膜,在不同温度下的氧、氮透过速率,计算了各种膜材料的氧、氮表观透过活化能,并对其本质进行了探讨。