热粘性对发动机排气管道中噪声传播的影响

声波在气体中传播时,气体的热粘性效应会使声波产生一定程度的衰减,且气体的声吸收系数随温度的升高而增大。由于发动机的排气温度较高,热粘性效应引起的排气管道中的噪声衰减应加以考虑。基于准平面波理论,首次计算了考虑热粘性效应时不同温度、流速和管道尺寸下排气管道中的传递损失,分析了各参数对管道中噪声衰减的影响。结果表明,随着温度和频率的升高热粘性声衰减增强,而气流流速和管道直径的增加会降低直管中的热粘性声衰减。对于简单膨胀腔,传递损失的预测结果表明,热粘性效应使通过频率处的声衰减有所改善。     

Determinación de la presión sonora radiada por pistones circulares y anillos no planos usando un método numérico simplificado

Although the study of the sound pressure radiation from membranes and plates is not new, current and future applications have produced a large body of recent research in the field. Several works have been published on the radiation from general plane surfaces and some particular geometries such as rectangular, circular, elliptic and annular. However, the case of sound radiation from non-planar axisymmetric rings that could be applied to the design of coaxial loudspeakers has not received much attention. In this article, a simplified numerical approach for determining the sound pressure radiated from symmetric non-planar pistons and rings is presented. The method can also include those cases having a radially-symmetric velocity distribution.     

Effect of sound wave stress on antioxidant enzyme activities and lipid peroxidation of Dendrobium candidum

The effect of sound wave stress on important medicinal plant, Dendrobium candidum Wall. ex Lindl, was investigated, including the responses on malondialdehyde (MDA) content, the activities change of superoxide dismutase (SOD), catalase (CAT), peroxidase (POD) and ascorbate peroxidase (APX). Results were found that the activities of SOD, CAT, POD and APX enhanced totally in different organs of D. candidum, as leaves, stems and roots, in response to the stress. Furthermore there happened similar shift of antioxidant enzymes activities, which increased in the initial stimulation and decreased afterwards. Data showed SOD, CAT, POD and APX activities ascended to max at day 9, 6, 9 and 12 in leaves, at day 9, 6, 12 and 9 in stems, and at day 12, 6, 9 and 9 in roots, respectively. As a lipid peroxidation parameter, MDA content in different organs increased in the beginning, dropped afterward, and increased again in the late. Anyway the total trend was the rise of MDA level compared to the control. It was interesting that the MDA content appeared the lowest levels almost when the antioxidant enzymes activities were up to the highest. Our results demonstrated the different organs of D. candidum might produce accumulation of active oxygen species (AOS) under initial treatment of sound wave stress. Later AOS might start to reduce due to the enhancement of antioxidant enzymes activities treated by the stress. The data revealed that the antioxidant metabolism was to be important in determining the ability of plants to survive in sound stress, and the up regulation of these enzymes activities would help to reduce the build up of AOS, which could protect plant cells from oxidative damage. Moreover, different cell compartments might activate different defensive system to reduce excessive amount of AOS. Finally the mechanism of this action was also discussed simply.     

The effect of sound level on perception of reproduced soundscapes

The aim of this work was to investigate the perception of soundscape reproduced by an ambisonic reproduction system on a horizontal plane, how the experience of space affected the perception of soundscape reproduction, and how the sound level adjustment on soundscape reproduction affected the perception of soundscape compared with actual conditions. There were three experiments conducted: a soundwalk in situ in Manchester (United Kingdom) city centre, listening tests in Salford (United Kingdom), and listening tests in Bandung (Indonesia). The listening tests used material recorded from four locations on the soundwalk route in Manchester. The Salford listening tests were performed at the in-situ measured sound level, and the participants were asked to adjust the sound level to the level that represents actual locations. The listening test in Bandung was conducted to understand the effect of participants who never come to the actual location to the perception of soundscape and the sound level adjustment. The listening tests in Bandung were conducted at the in situ sound level, at 9.5 dB below the in situ sound level (based on the preference sound level from the experiment in Salford), and the participants were also requested to adjust the sound level to the level that represents the actual space (to examine the consistency with the experiment in Salford). In each case, soundscape perception was measured on 19 semantic differential scales. Analysis of the semantic differential results showed that the ambisonic reproduction produced a similar subjective experience to the in situ soundwalk when the reproduction sound level was 9.5 dB lower than the actual sound level in situ. Reproduction at the actual sound level in situ produced a different dimensional space. The study shows that the sound level adjustment of soundscape reproduction in laboratory experiment produces more ecologically valid results compared to the reproduction at the actual sound level in situ.     

Prediction of the acoustic behavior of a parallel assembly of hollow cylinders

In this paper, an approach to predict the sound absorption coefficient and sound transmission loss of a parallel assembly of hollow cylinders is presented. This approach is based on image processing and the Parallel Transfer Matrix Method (PTMM) using four Johnson–Champoux–Allard effective fluids. First, effective parameters of each fluid are identified using geometrical considerations and numerical simulations. Then, the approach is validated for a stack of uniform plastic straws, and used to model a natural stack of non-uniform switchgrass straws. Finally, two parametric studies are conducted to evaluate the effects of the geometric parameters of the straws on the acoustic behavior of their stack. It is shown that there are optimal parameters that maximize the acoustic behavior at specific frequencies.     

Investigation studies involving sound absorbing parameters of roadside screen panels subjected to aging in simulated conditions

The paper presents the results of investigation studies involving the impact of atmospheric factors on sound-absorbing parameters of roadside acoustic screen panels. The research studies comprised the aging test consisting of 1000 cycles in simulated conditions, sound absorption measurements and surface morphology tests, using the SEM scanning method. The simulation of aging consisted of 100 or 150 cycles at a time. Then, the panels were investigated in the reverberation chamber to define their sound-absorbing properties. The process was repeated until 1000 cycles were completed. Basing on the carried out tests, a statistical linear model was worked out which was used to estimate the value of a single number sound absorption coefficient after successive aging cycles. The optimality of the model was demonstrated by means of a statistical test confirming normal distribution of random residuals. For the research studies, we employed an innovative structural design of panels for which aging characteristics were obtained. Basing on the obtained results and on the statistical analysis, the prospects to maintain acoustic properties of the panels during their service life was estimated.     

Inverse acoustical characterization of natural jute sound absorbing material by the particle swarm optimization method

For modeling of jute as acoustic material, knowledge of its non-acoustical parameters like porosity, tortuosity, air flow resistivity, thermal and viscous characteristic lengths is a prime requisite. Measurement of these non-acoustical parameters is not straightforward and involves a dedicated measurement setup. So in order to overcome this issue, the inverse acoustical characterization can be used. In this paper, the particle swarm optimization method (PSO) is used as an optimization method. This method estimates the non-acoustical parameters of jute material in felt form by minimizing the error between experimental and theoretical sound absorption data. In this work, the impedance prediction models for fibrous materials like Johnson–Champoux–Allard model with rigid and limp frame and Garai–Pompoli model is used for sound absorption coefficient calculation by the transfer matrix method along with the PSO. The inverse estimated non-acoustical parameters for jute material are then compared with estimated and experimentally measured parameters for jute felts. Using these inversely predicted parameters, sound absorption of multilayer sound absorbers is also studied.