The characteristics of acoustic line array prototypes for scale model experiments

The sound fields created by three different settings of a 5 m long linear loudspeaker array were studied experimentally in the present investigation in an attempt to find out a method to produce a reasonable sound field for scaled down model experiments. The first setting was with all the loudspeakers facing vertically upward, while the second setting was with all the loudspeakers facing the horizontal. The last one resembled the first setting but the loudspeakers were put inside a small partial enclosure whose opening was facing vertically upward. Results show that the last setting can produce a sound field with characteristics close to those of a two-dimensional sound field. The second setting results in a sound directivity pattern relevant to that of the measured A-weighted traffic noise.     

Space averaging of vibration level differences measured in lightweight building structures

This paper examines space averaging methods applied to structural level differences measured in lightweight building structures (two beam junction and single plate and beam junction). The methods studied include the averaging assuming a constant input force, the averaging based on a constant vibration level across the source element, and the arithmetic averaging of level differences. Tests indicate that a fairly steady input force can be easily produced when using an impulsive source such as a hammer; the constant input force method is then appropriate and can be used to space average level differences (the two beam structure showing a standard deviation of 0.1 dB from the averaging based on levels normalised to the force). On the other hand, acceleration levels can exhibit significant variations with position due to the low mode count and modal overlap of some lightweight elements such as timber beams. Variations in the vibration level across the source element can then be responsible for large inaccuracies in the level difference calculated from the constant level assumption, the two beams’ results showing errors greater than 5 dB at several 1/3 octave band frequencies. The latter averaging method is then inappropriate and should not be used.     

船用超声液位传感器的分析与设计

介绍了一种船用某型超声液位传感器的基本结构和工作原理。在对脉冲式超声探头的轴向声压分布特点及其声透射强度分析研究的基础上,给出了该传感器的超声信号发射端与接收端之间距离d和压电晶片保护膜的壁厚δ值的确定方法。最后设计了一套超声液位传感器性能测试实验平台,对上述理论研究结论进行了实验验证。     

基于桥域理论的Cu单晶纳米切削跨尺度仿真研究

桥域方法是一种典型的跨尺度仿真研究方法.基于桥域理论,本文分析了原子和连续介质耦合区域的处理问题,即在耦合区采用不同的权重计算系统的能量,通过Lagrange乘子法对原子和连续介质位移进行约束.采用桥域方法,建立了单晶Cu米纳切削的跨尺度仿真模型,获得了单晶Cu纳米切削的材料变形机理.同时,研究了不同切削速度对纳米切削过程和原子受力分布的影响,仿真结果表明:随着切削速度的提高,切削区原子所受的力值增大,切屑变形系数减小,已加工表面变质层厚度增加.本文基于桥域理论,实现了Cu单晶纳米切削跨尺度的建模和仿真, 关键词： 桥域法 纳米切削 单晶Cu 切削速度     

A broad-band constant beam-width array with four elements

This paper describes in detail an acoustical array structure with fourelements that have cosine directivity function over a certain frequency range.The acoustical axis directions of these elements are orthogonal to each other,sotheir beams cover all bearing angles within 360°.By use of the amplitude bear-ing method,it is easy to detect the bearing of incident acoustic signal.A specialsound reflection foam rubber is designed as a back baffle of the array.It hasbeen shown,in practice,that the constant beam-width has been obtained for amultiple frequency band of the ratio of 8:1.The paper also gives a mathematicalmodel for the array structure.The theoretical values are consistent with themeasured results.     

高分子梯度溶液吸声机理的研究

制备了高分子均匀溶液和梯度溶液,并在声管中测试其声衰减性能.实验结果表明,高分子梯度溶液的声衰减效果明显优于(即大于)相应的均匀溶液的声衰减.根据连续分层介质中声波传播理论建立了计算高分子梯度溶液声衰减的数学模型.计算结果与实验结果一致.由实验和理论分析结果得出了高分子梯度溶液的梯度吸声机理,即多次反射、多次吸收,最终将声能转化为热能.     

A basic study on the sound field analysis of periodic structures by boundary integral equation method

This study deals with the development of the approximate method to analyze the sound field around equally spaced finite obstacles, using the periodic boundary condition. First, on the assumption that the equally spaced finite obstacles are the periodically arranged obstacles, the sound field is analyzed by boundary integral equation method with a Green’s function which satisfies the periodic boundary condition. Furthermore, by comparing these results and the exact solution by using the fundamental solution as Green’s function, the validity of the approximate method is also investigated. Next, in order to evaluate the applicability of the approximate method, the simple formula using some parameters, i.e., the frequency, the period, and the number of obstacles, etc., is proposed. The results of the sound field analysis applied the formula are presented.     

Sound and weak shock wave propagation in gas-liquid foams

Propagation of sound and weak shock waves in gas-liquid foams is investigated theoretically and experimentally. An original physical model is developed to describe the evolution of small perturbations in a foam of polyhedral structure. The model developed takes into account both peculiarities of interface heat transfer in foam and liquid motion through the system of Plateau-Gibbs borders which results in the appearance of an additional hydrodynamic dissipative force. The Rayleigh equation analog, which takes into account the latter phenomenon, is obtained. Structure and dynamics of weak shock waves are investigated. A vertical shock tube was constructed and used to measure the parameters of weak shock wave propagation in gas-liquid foams of polyhedral structure. Spectral analysis of the data obtained shows that there are weak dispersion and strong dissipation of the initial signal. Comparison of the evolution of experimental and theoretical profiles permits to conclude that the suggested model allows to describe the peculiarities of acoustical perturbations in gas-liquid foam more precisely than it follows from the standard models. Received 15 September 1993 / Accepted 27 December 1993     

An <Emphasis Type="Italic">In Situ</Emphasis> Ultrasonic Technique for Simultaneous Measurement of Longitudinal and Shear Wave Speeds in Solids

Ultrasonic wave speed measurements are widely used to infer the elastic properties of solids. In the standard method, longitudinal and shear transducers are used separately to measure the corresponding wave speeds in a material. A new experimental method is introduced for simultaneously measuring the longitudinal and the shear wave speeds using a single set of longitudinal or shear transducers. The method can also be used to measure the wave speeds in situ during deformation by placing the transducers along the loading axis. The transducers are housed in a specially designed fixture such that they are not subjected to loading. The technique is demonstrated by performing uniaxial compression experiments on fully dense isotropic solids (where the wave speeds are not expected to change during deformation) and in polymeric foams (where the wave speeds are affected by damage).