Large scale sonochemical processing: aspiration and actuality

It has been recognised for many years that power ultrasound has great potential in a wide variety of processes in the chemical and allied industries. Some of these processes have been known for many years and continue to flourish as major commercial applications, e.g. plastic welding and cleaning. Others, like ultrasonic drilling, while showing great potential have not been widely exploited to date. The potential for the industrial use of power ultrasound is enormous, and yet industry seems somewhat reluctant to adopt it. In this article the existing uses of power ultrasound in processing are reviewed and the potentials are explored.     

Numerical simulation of cavitation bubble dynamics induced by ultrasound waves in a high frequency reactor

The use of high frequency ultrasound in chemical systems is of major interest to optimize chemical procedures. Characterization of an open air 477 kHz ultrasound reactor shows that, because of the collapse of transient cavitation bubbles and pulsation of stable cavitation bubbles, chemical reactions are enhanced. Numerical modelling is undertaken to determine the spatio-temporal evolution of cavitation bubbles. The calculus of the emergence of cavitation bubbles due to the acoustic driving (by taking into account interactions between the sound field and bubbles' distribution) gives a cartography of bubbles' emergence within the reactor. Computation of their motion induced by the pressure gradients occurring in the reactor show that they migrate to the pressure nodes. Computed bubbles levitation sites gives a cartography of the chemical activity of ultrasound. Modelling of stable cavitation bubbles' motion induced by the motion of the liquid gives some insight on degassing phenomena.     

中空球材料的研究进展

从中空球壳材料的选择、制备技术及表征手段三方面,对中空球结构材料的应用、研究现状和最新进展作了比较全面的综述。     

Catalytic wet air oxidation of phenol over ultrasound-assisted synthesized Ni/CeO2–ZrO2 nanocatalyst used in wastewater treatment

Non-noble metal Ni with different loadings was coated on precipitated CeO₂–ZrO₂ support by the sonochemistry method and examined for catalytic wet air oxidation of phenol. The structure of the nanocatalysts was determined by BET, FESEM, XRD, and FTIR analyses. The results showed non-uniform morphology of the nanocatalyst at lower Ni contents changed to homogenous morphology with spherical nano particles at higher Ni contents. While the size of NiO crystals remained constant with rising Ni content, the crystallinity of NiO significantly increased. If the crystallinity of NiO was 100% in 20% wt Ni/CeO₂–ZrO₂, the crystallinity of NiO in 5% wt Ni was found to be 41.13%. The average particle size in Ni(15%)/CeO₂–ZrO₂ was 77 nm in which 85.71% of particle diameters were less than 100 nm. Catalytic wet air oxidation of phenol with different Ni loadings indicated improvement of phenol destruction at higher amounts of active phase. Removal of phenol increased with increasing catalyst loading from 4 to 9.0 g/l but further increase to 10 g/l declined the catalyst reactivity.     

Solvent effect in sonochemical synthesis of metal-alloy nanoparticles for use as electrocatalysts

Nanomaterials are now widely used in the fabrication of electrodes and electrocatalysts. Herein, we report a sonochemical study of the synthesis of molybdenum and palladium alloy nanomaterials supported on functionalized carbon material in various solvents: hexadecane, ethanol, ethylene glycol, polyethylene glycol (PEG 400) and Ionic liquids (ILs). The objective was to identify simple and more environmentally friendly design and fabrication methods for nanomaterial synthesis that are suitable as electrocatalysts in electrochemical applications. The particles size and distribution of nanomaterials were compared on two different carbons as supports: activated carbon and multiwall carbon nanotubes (MWCNTs). The results show that carbon materials functionalized with ILs in ethanol/deionized water mixture solvent produced smaller particles sizes (3.00 ± 0.05 nm) with uniform distribution while in PEG 400, functionalized materials produced 4.00 ± 1 nm sized particles with uneven distribution (range). In hexadecane solvents with Polyvinylpyrrolidone (PVP) as capping ligands, large particle sizes (14.00 ± 1 nm) were produced with wide particle size distribution. The metal alloy nanoparticles produced in ILs without any external reducing agent have potential to exhibit a higher catalytic activity due to smaller particle size and uniform distribution.     

Ultrasound-assisted synthesis of NiFe- layered double hydroxides as efficient electrode materials in supercapacitors

Under ultrasound irradiation, NiFe-layered double hydroxide (NiFe-LDH) nanostructures with three molar ratios and three dissimilar reaction times were prepared. The powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and Fourier transform infrared spectroscopy (FT-IR) were employed to characterize the synthesized nanomaterials. Using a sonochemichal route, various morphologies of the NiFe-LDH nanostructures without any impurity and variations in the structure were produced. During the optimization process, it was found that sonication time and reagent concentration in a fixed irradiation frequency can affect the size and the morphology of the produced nanostructures. Under ultrasound irradiation, non-aggregated particles with uniform, spherical morphology were obtained with molar ratios of 4:1 (Ni:Fe) with 45 W at 180 min. The NiFe-LDH samples were observed to be supercapacitor under a 6 M KOH solution. When morphologically-controlled NiFe-LDH samples were used, the pseudo-capacitive behavior of the nanostructures was tuned. After 3 h of ultrasonic irradiation, the optimized sample (NiFe-LDH spherical nanostructures with 4:1 M ratio) had a high value of specific capacitance (168F g⁻¹).     

Degradation of dissolved diazinon pesticide in water using the high frequency of ultrasound wave

This article aims to apply the ultrasound technique in the field of clean technology to protect environment. The principle of sonochemistry is conducted here to degrade pesticides in simulated industrial wastewater resulted from a factory manufacturing pesticides namely diazinon. Diazinon pesticide selected in this study for degradation under high frequency ultrasound wave. Three different initial concentrations of diazinon (800, 1200, and 1800 ppm), at different solution volumes were investigated in to degrade dissolved diazinon in water. Ultrasound device with 1.7 MHz, and 0.044 cm diameter, was used to study the degradation process.

It is found that as the concentration of diazinon increased, the degradation is also increasing, and when the solution volume increases, the ability to degraded pesticides decreases. The experimental results showed an optimum condition achieved for degradation of diazinon at 1200 ppm as initial concentration and 50 ml solution volume. Kinetic modeling applied for the obtained results showed that the degradation of diazinon by high ultrasound frequency wave followed a pseudo-first-order model with apparent rate constant of around of 0.01 s⁻¹.     

Sonochemical synthesis of nanocrystalline mercury sulfide, selenide and telluride in aqueous solutions

Nanocrystalline mercury chalcogenides HgE (E = S, Se, Te) were synthesized in a single step by a convenient, simple sonochemical method. Mercury nitrate, Hg(NO₃)₂, dissolved in 0.1 M ethylenediamine tetraacetic acid (EDTA), was used as the source of mercury and elemental chalcogenes, dissolved in a NaOH solution, as the sources of chalcogenide. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDAX). The synthesis procedure is simple and uses less toxic reagents than the previously reported methods. The results showed that the complexing agent EDTA plays a crucial role in the process.     

Sonochemical preparation of SbSI gel

A novel sonochemical method for direct preparation of nanocrystalline antimony sulfoiodide (SbSI) has been established. The SbSI gel was synthesized using elemental Sb, S and I in the presence of ethanol under ultrasonic irradiation (35 kHz, 2 W/cm²) at 50 °C for 2 h. The products were characterized by using techniques such as powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and optical diffuse reflection spectroscopy (DRS). The SEM and HRTEM investigations exhibit that the as-prepared samples are made up of large quantity nanowires with diameters of about 10–50 nm and lengths reaching up to several micrometers and single-crystalline in nature.     

声空化工程初步*

声空化气泡内的高温、高压和高密度是声空化工程的机理和基础。该文简要回顾了国内外声空化理论和实验研究的进展,针对当前在液体中进行工业规模声处理等声能应用方面的现状和存在的问题,提出了扩大声能应用的一种可能途径——声空化空间分布控制并在实验室内进行了实验研究。结果表明该方法具有可行性。在此基础上,文中给出了基于空化空间分布控制方法在稠油井口辅助降粘和高固污泥预处理方面取得声空化工程初步应用的两个例子。现场的试验结果表明,这两种声空化工程化样机在实际现场工况条件下,均取得了较好的应用效果。最后,对当前声空化工程应用前景进行了初步探讨。