The effect of high intensity ultrasound on the synthesis of some polyurethanes

High intensity ultrasound has been applied to the preparation of polyurethanes from a number of diisocyanates and diols. In all cases, the sonochemical reactions proceeded faster in the early stages and led to higher molecular weight polymers. The effect of changing the ultrasound intensity is discussed and some speculation as to the mechanism of the reaction enhancement is given.     

Effect of potassium monopersulfate (oxone) and operating parameters on sonochemical degradation of cationic dye in an aqueous solution

In this study, removal of Cresol Red (CR), a cationic triphenylmethane dye, by 300 kHz ultrasound was investigated. The effect of additive such as potassium monopersulfate (oxone) was studied. Additionally, sonolytic degradation of CR was investigated at varying power and initial pH. RC can be readily eliminated by the ultrasound process. The obtained results showed that. Sonochemical degradation of CR was strongly affected by ultrasonic power and pH. The degradation rate of the dye increased substantially with increasing ultrasonic power in the range of 20–80 W. This improvement could be explained by the increase in the number of active cavitation bubbles. The significant degradation was achieved in acidic conditions (pH = 2) where the color removal was 99% higher than those observed in higher pH aqueous solutions. The ultrasonic degradation of dye was enhanced by potassium monopersulfate (oxone) addition. It was found that the degradation of the dye was accelerated with increased concentrations of oxone for a reaction time of 75 min.     

Sonochemical assisted synthesis of SrFe12O19 nanoparticles

We present the synthesis of M-type strontium hexaferrite by sonochemistry and annealing. The effects of the sonication time and thermal energy on the crystal structure and magnetic properties of the obtained powders are presented. Strontium hexagonal ferrite (SrFe₁₂O₁₉) was successfully prepared by the ultrasonic cavitation (sonochemistry) of a complexed polyol solution of metallic acetates and diethylene glycol. The obtained materials were subsequently annealed at temperatures from 300 to 900 °C. X-ray diffraction analysis shows that the sonochemical process yields an amorphous phase containing Fe³⁺, Fe²⁺ and Sr²⁺ ions. This amorphous phase transforms into an intermediate phase of maghemite (γ-Fe₂O₃) at 300 °C. At 500 °C, the intermediate species is converted to hematite (α-Fe₂O₃) by a topotactic transition. The final product of strontium hexaferrite (SrFe₁₂O₁₉) is generated at 800 °C. The obtained strontium hexaferrite shows a magnetization of 62.3 emu/g, which is consistent with pure hexaferrite obtained by other methods, and a coercivity of 6.25 kOe, which is higher than expected for this hexaferrite. The powder morphology is composed of aggregates of rounded particles with an average particle size of 60 nm.     

Ultrasonic approach for surface nanostructuring

The review is about solid surface modifications by cavitation induced in strong ultrasonic fields. The topic is worth to be discussed in a special issue of surface cleaning by cavitation induced processes since it is important question if we always find surface cleaning when surface modifications occur, or vice versa. While these aspects are extremely interesting it is important for applications to follow possible pathways during ultrasonic treatment of the surface: (i) solely cleaning; (ii) cleaning with following surface nanostructuring; and (iii) topic of this particular review, surface modification with controllably changing its characteristics for advanced applications. It is important to know what can happen and which parameters should be taking into account in the case of surface modification when actually the aim is solely cleaning or aim is surface nanostructuring. Nanostructuring should be taking into account since is often accidentally applied in cleaning. Surface hydrophilicity, stability to Red/Ox reactions, adhesion of surface layers to substrate, stiffness and melting temperature are important to predict the ultrasonic influence on a surface and discussed from these points for various materials and intermetallics, silicon, hybrid materials. Important solid surface characteristics which determine resistivity and kinetics of surface response to ultrasonic treatment are discussed. It is also discussed treatment in different solvents and presents in solution of metal ions.     

Ultrasound-assisted synthesis of water-soluble monosubstituted diruthenium compounds

The elusive monosubstituted diruthenium complexes [Ru₂Cl(DAniF)(O₂CMe)₃] (1), [Ru₂Cl(DPhF)(O₂CMe)₃] (2), [Ru₂Cl(D-p-CNPhF)(O₂CMe)₃] (3), [Ru₂Cl(D-o-TolF)(O₂CMe)₃] (4), [Ru₂Cl(D-m-TolF)(O₂CMe)₃] (5), [Ru₂Cl(D-p-TolF)(O₂CMe)₃] (6) and [Ru₂Cl(p-TolA)(O₂CMe)₃] (7) have been synthesized using for the first time ultrasound-assisted synthesis to carry out a substitution reaction in metal–metal bonded dinuclear compounds (DAniF⁻ = N,N′-bis(4-anisyl)formamidinate; DPhF⁻ = N,N′-diphenylformamidinate; D-p-CNPhF⁻ = N,N′-bis(4-cyanophenyl)formamidinate; D-o/m/p-TolF⁻ = N,N′-bis(2/3/4-tolyl)formamidinate; p-TolA⁻ = N-4-tolylamidate). This is a simpler and greener method than the tedious procedures described in the literature, and it has permitted to obtain water-soluble complexes with good yields in a short period of time. A synthetic study has been implemented to find the best experimental conditions to prepare compounds 1–7. Two different types of ligands, formamidinate and amidate, have been used to check the generality of the method for the preparation of monosubstituted complexes. Five new compounds (2–6) have been obtained using a formamidinate ligand, the synthesis of the previously described compound 1 has been improved, and an unprecedented monoamidate complex has been achieved (7). The crystal structures of compounds 3 and 7 have been solved by single crystal X-ray diffraction. These compounds show the typical paddlewheel structure with three acetate ligands and one formamidinate (3) or amidate (7) bridging ligand at the equatorial positions. The axial positions are occupied by the chloride ligand giving rise to one-dimensional polymer structures that were previously unknown for monosubstituted compounds.     

Understanding the effects of mineral water matrix on degradation of several pharmaceuticals by ultrasound: Influence of chemical structure and concentration of the pollutants

Degradation of seven relevant pharmaceuticals with different chemical structures and properties: acetaminophen (ACE), cloxacillin (CXL), diclofenac (DCF), naproxen (NPX), piroxicam (PXC), sulfacetamide (SAM) and cefadroxil (CDX), in distilled water and mineral water by ultrasound was studied herein. Firstly, proper conditions of frequency and acoustic power were determined based on the degradation ability of the system and the accumulation of sonogenerated hydrogen peroxide (24.4 W and 375 kHz were found as the suitable conditions for the sonochemical treatment of the pharmaceuticals). Under such conditions, the pharmaceuticals degradation order in distilled water was: PXC > DCF ~ NPX > CXL > ACE > SAM > CDX. In fact, the initial degradation rate showed a good correlation with the Log P parameter, most hydrophobic compounds were eliminated faster than the hydrophilic ones. Interestingly, in mineral water, the degradation of those hydrophilic compounds (i.e., ACE, SAM and CDX) was accelerated, which was attributed to the presence of bicarbonate ions. Afterwards, mineral water containing six different initial concentrations (i.e., 0.331, 0.662, 3.31, 16.55, 33.1, and 331 µM) of selected pharmaceuticals was sonicated, the lowest concentration (0.331 µM) always gave the highest degradation of the pollutants. This result highlights the great ability of the sonochemical process to treat bicarbonate-rich waters containing pollutants at trace levels, as pharmaceuticals. Finally, the addition of ferrous ions to the sonochemical system to generate a sono-Fenton process resulted in an acceleration of degradation in distilled water but not in mineral water. This was attributed to the scavenging of sonogenerated HO• by bicarbonate anion, which decreases H₂O₂ accumulation, thus limiting the Fenton reaction.     

Disinfection characteristics of an advanced rotational hydrodynamic cavitation reactor in pilot scale

Hydrodynamic cavitation is a promising technique for water disinfection. In the present paper, the disinfection characteristics of an advanced hydrodynamic cavitation reactor (ARHCR) in pilot scale were studied. The effects of various flow rates (1.4–2.6 m³/h) and rotational speeds (2600–4200 rpm) on the removal of Escherichia coli (E. coli) were revealed and analyzed. The variation regularities of the log reduction and reaction rate constant at various cavitation numbers were established. A disinfection rate of 100% was achieved in only 4 min for 15 L of simulated effluent under 4200 rpm and 1.4 m³/h, with energy efficiency at 0.0499 kWh/L. A comprehensive comparison with previously introduced HCRs demonstrates the superior performance of the presented ARHCR system. The morphological changes in E. coli were studied by scanning electron microscopy. The results indicate that the ARHCR can lead to serious cleavage and surface damages to E. coli, which cannot be obtained by conventional HCRs. Finally, a possible damage mechanism of the ARHCR, including both the hydrodynamical and sonochemical effects, was proposed. The findings of the present study can provide strong support to the fundamental understanding and applications of ARHCRs for water disinfection.     

Kinetics and mechanisms of ultrasonic degradation of volatile chlorinated aromatics in aqueous solutions

Ultrasonic decompositions of chlorobenzene (ClBz), 1,4-dichlorobenzene and 1-chloronaphthalene were investigated at 500 kHz in order to gain insight into the kinetics and mechanisms of the decomposition process. The disappearance of ClBz on sonication is almost simultaneously accompanied by the release of chloride ions as a result of the rapid cleavage of carbon–chlorine bonds with a concomitant release of CO, C₂H₂, CH₄ and CO₂. The intermediates resulting from attack of HO^√ radicals were detected but in a quite low yield (less than 2 μM). The generation of H₂O₂ on sonolysis is not significantly affected by the presence of aqueous ClBz while the generation of NO₂⁻ and NO₃⁻ is inhibited initially due to the presence of ClBz which diffuses into the gas–bubble interfaces and inhibits the interactions between free radicals and nitrogen. Moreover, brown carbonaceous particles are present throughout the ultrasonic irradiation process, which are consistent with soot formation under pyrolytic conditions. These important features suggest that, at the relatively high initial substrate concentrations used in this study, ultrasonic degradation of ClBz takes place predominantly both within the bubbles and within the liquid–gas interfaces of bubbles where it undergoes high-temperature combustion. Under these conditions, the oxidation of ClBz by free radical HO^√ outside of bubbles is a minor factor (though results of recent studies suggest that attack by HO^√ is more important at lower initial substrate concentrations). The sonochemical decomposition of volatiles follows pseudo-first-order reaction kinetics but the degradation rates are affected by operating conditions, particularly initial substrate concentration and ultrasonic intensity.     

The importance of chemical mechanisms in sonochemical modelling

A state-of-the-art chemical mechanism is introduced to properly describe chemical processes inside a harmonically excited spherical bubble placed in water and saturated with oxygen. The model uses up-to-date Arrhenius-constants, collision efficiency factors and takes into account the pressure-dependency of the reactions. Duplicated reactions are also applied, and the backward reactions rates are calculated via suitable thermodynamic equilibrium conditions. Our proposed reaction mechanism is compared to three other chemical models that are widely applied in sonochemistry and lack most of the aforementioned modelling issues. In the governing equations, only the reaction mechanisms are compared, all other parts of the models are identical. The chemical yields obtained by the different modelling techniques are taken at the maximum expansion of the bubble. A brief parameter study is made with different pressure amplitudes and driving frequencies at two equilibrium bubble sizes. The results show that due to the deficiencies of the former reaction mechanisms employed in the sonochemical literature, several orders of magnitude differences of the chemical yields can be observed. In addition, the trends along a control parameter can also have dissimilar characteristics that might lead to false optimal operating conditions. Consequently, an up-to-date and accurate chemical model is crucial to make qualitatively and quantitatively correct conclusions in sonochemistry.     

核燃料后处理中锕系元素的声化学调价研究进展

硝酸水溶液在超声波辐照下产生自由基及活性分子,通过加入辅助试剂或控制硝酸浓度可以选择性地利用这些活性组分氧化或还原铀、镎、钚等锕系元素。在核燃料后处理流程中可利用上述反应对锕系元素进行声化学调价,实现锕系元素调价的无盐化,在某些调价过程中甚至无需额外加入任何试剂。由于上述优点,声化学方法有望在后处理流程的钚、镎调价方面得到应用。