Acoustic cavitation in 1-butyl-3-methylimidazolium bis(triflluoromethyl-sulfonyl)imide based ionic liquid

In this work, a comparison between the temperatures/pressures within acoustic cavitation bubble in an imidazolium-based room-temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium bis(triflluoromethyl-sulfonyl)imide ([BMIM][NTf₂]), and in water has been made for a wide range of cavitation parameters including frequency (140–1000 kHz), acoustic intensity (0.5–1 W cm⁻²), liquid temperature (20–50 °C) and external static pressure (0.7–1.5 atm). The used cavitation model takes into account the liquid compressibility as well as the surface tension and the viscosity of the medium. It was found that the bubble temperatures and pressures were always much higher in the ionic liquid compared to those predicted in water. The valuable effect of [BMIM][NTf₂] on the bubble temperature was more pronounced at higher acoustic intensity and liquid temperature and lower frequency and external static pressure. However, confrontation between the predicted and the experimental estimated temperatures in ionic liquids showed an opposite trend as the temperatures measured in some pure ionic liquids are of the same order as those observed in water. The injection of liquid droplets into cavitation bubbles, the pyrolysis of ionic liquids at the bubble-solution interface as well as the lower number of collapsing bubbles in the ionic liquid may be the responsible for the lower measured bubble temperatures in ionic liquids, as compared with water.     

镉掺杂氧化锌纳米晶禁带宽度的尺寸效应和掺杂效应研究

Cadmium-doped zinc oxide nanocrystals in the quantum confinement region have been firstly synthesized by a fast and facile sonochemical method.The alloyed structure of the nanocrystals is confirmed by X-ray diffraction,transmission electron microscopy,and infrared analysis.With the increase of cadmium to zinc molar ratio from 0 to 2.0,the crystallite sizes of the samples decrease from 5.1 nm to 2.6 nm,and the band gaps of the samples show a red shift then a blue shift,and a red shift again.The variations of band gaps of the samples can be interpreted by the crystallite size and the composition.It is found that both the non-thermal equilibrium environment established in the sonochemical reaction and the coordination ability of triethylene glycol solvent play crucial roles in the current preparation.     

Simulation of the spatial distribution of the acoustic pressure in sonochemical reactors with numerical methods: A review

Numerical methods for the calculation of the acoustic field inside sonoreactors have rapidly emerged in the last 15 years. This paper summarizes some of the most important works on this topic presented in the past, along with the diverse numerical works that have been published since then, reviewing the state of the art from a qualitative point of view. In this sense, we illustrate and discuss some of the models recently developed by the scientific community to deal with some of the complex events that take place in a sonochemical reactor such as the vibration of the reactor walls and the nonlinear phenomena inherent to the presence of ultrasonic cavitation. In addition, we point out some of the upcoming challenges that must be addressed in order to develop a reliable tool for the proper designing of efficient sonoreactors and the scale-up of sonochemical processes.     

Ultrasound assisted the preparation of 1-(4-nitrophenyl) imidazole under a new multi-site phase-transfer catalyst – Kinetic study

In this work, the nitroarylation of imidazole catalyzed by a new novel dual-site phase-transfer catalyst was carried out in an alkaline solution/imidazole in chlorobenzene two-phase medium with ultrasonic irradiation (40 kHz, 300 W). This new synthesized phase-transfer catalyst, N¹,N⁶-diethyl-N¹,N¹,N⁶,N⁶-tetraisopropylhexane-1,6-diaminium dichloride (MPTC), which possesses two-site activity, was obtained from the reaction of 1,6-dichlorohexane and N-ethyl-N-isopropylpropane-2-amine. The reaction of imidazole and alkali was carried out at the interface to generate sodium imidazole anion which can further react with MPTC form quaternary ammonium imidazole anion along with ultrasonic irradiation (40 kHz, 300 W). This ion-pair further react with 1-chloro-4-nitrobenzene which is present in the organic phase to produce 1-(4-nitropheny) imidazole. The reaction follows a pseudo first-order rate law. Kinetics of the reactions such as effect of the catalysts, ultrasonic effect, agitation speed, temperature, alkaline concentration, amount of 4-nitrochlorobenzene and the solvent effect on the reaction rate were investigated in detail. Peculiar phenomenon for the dependence of the reaction rate on the amount of MPTC and ultrasonication are explained satisfactorily.     

Tannic acid NPs – Synthesis and immobilization onto a solid surface in a one-step process and their antibacterial and anti-inflammatory properties

Tannic acid nanoparticles were synthesized from an aqueous solution without the use of stabilizers via a sonochemical process. In order to avoid the dissolution of the formed nanoparticles, the sonochemical reaction was performed in the presence of a cotton fabric: following their formation, the tannic acid nanoparticles were embedded into the cotton substrate in a one-step process. The bioactive properties of the tannic acid coated surface were examined towards the inhibition of myeloperoxidase and collagenase, two major enzymes related with inflammatory processes. In addition, the antibacterial activity of the tannic acid nanoparticles coated textiles was evaluated against Staphylococcus aureus and Pseudomonas aeruginosa.     

Sonochemical temperature controlled synthesis of pellet-, laminate- and rice grain-like morphologies of a Cu(II) porous metal–organic framework nano-structures

Nano-structures of the Cu(II) metal–organic framework, {Cu(BDT)(DMF)·CH₃OH·0.25DMF}_n (1), which BDT²⁻ is 1,4-benzeneditetrazolate, have been synthesized by the reaction of H₂BDT with Cu(NO₃)₂·6H₂O via ultrasonic irradiation in three different temperatures, which causes different morphologies. The products were characterized by IR spectroscopy, elemental analysis, scanning electron microscopy and X-ray powder diffraction. This study demonstrates that sonochemistry is a suitable method for preparation of metal–organic framework nano-structures and temperature is an effective parameter on morphologies of Cu(II) metal–organic framework nano-structures.     

Self-assembled 3D sphere-like SrMoO4 and SrMoO4:Ln3+ (Ln = Eu,Sm, Tb,Dy) microarchitectures: Facile sonochemical synthesis and optical properties

Three-dimensional (3D) well-defined SrMoO₄ and SrMoO₄:Ln³⁺ (Ln = Eu, Sm, Tb, Dy) hierarchical structures of obvious sphere-like shape have been successfully synthesized using a large-scale and facile sonochemical route without using any catalysts or templates. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), and photoluminescence (PL) spectra were used to characterize the samples. The intrinsic structural feature of SrMoO₄ and external factor, namely the ultrasonic time and the pH value, are responsible for the ultimate shape evolutions of the product. The possible formation mechanism for the product is presented. Additionally, the PL properties of SrMoO₄ and SrMoO₄:Ln³⁺ (Ln = Eu, Sm, Tb, Dy) hierarchical structures were investigated in detail. The Ln³⁺ ions doped SrMoO₄ samples exhibit respective bright red–orange, yellow, green and white light of Eu³⁺, Sm³⁺, Tb³⁺ and Dy³⁺ under ultraviolet excitation, and have potential application in the field of color display. Simultaneously, this novel and efficient pathway could open new opportunities for further investigating about the properties of molybdate materials.     

Insights into the sonochemical decomposition of Fe(CO)5: theoretical and experimental understanding of the role of molar concentration and power density on the reaction yield

The present work analyses, in detail, the optimization of a sonochemical process with respect to concentration of precursor and power supplied in a system. This is due to that even a small change in power dramatically changes the high-energy conditions created with the bubble collapse. A model reaction that has been considered for this purpose involves the decomposition of Fe(CO)₅ in decalin solvent as this reaction is strongly influenced by the cavitation conditions. Sonochemical treatment of this carbonyl results in the formation of amorphous Fe₂O₃, which on heat treatment gives nanocrystalline Fe₂O₃. It has been observed that concentration and power density parameters play an important role to obtain higher decomposition of Fe(CO)₅ and hence higher yield of the amorphous Fe₂O₃ product. Also, using the experimentally observed results, a correlation (polynomial) has been developed.     

Clarification of regimes determining sonochemical reactions in solid particle suspensions

Although there has been extensive research on the factors that influence sonochemical reactions in solid particle suspensions, the role that solid particles play in the process remains unclear. Herein, the effect of monodisperse silica particles (10–100 μm, 0.05–10 vol%) on the sonochemical activity (20 kHz) was investigated using triiodide formation monitoring and luminol tests. The results demonstrate that, in the particle size range considered, the sonochemical yields were enhanced in dilute suspensions (0.05–1 vol%), while further particle addition in semi-dilute suspensions (1–10 vol%) decreased the yields. Two regimes, namely the site-increasing regime and sound-damping regime, are identified in respect of the enhancing and inhibiting effects of the particles, respectively, and their dependence on particle characteristics is analyzed. Both regimes are confirmed based on the cavitation erosion test results or cavitation noise analysis. The clarification of the two regimes provides a better understanding of the dominant factors controlling sonochemistry in the presence of solid particles, as well as a guide for sonochemical efficiency prediction.     

Evaluation the pozzolanic reactivity of sonochemically fabricated nano natural pozzolan

Natural pozzolans are appropriate supplementary cementitious materials in cement and concrete industry. A simple sonochemical method was developed to synthesize nanostructures of natural pozzolan. Chemical composition, crystallinity, morphology and reactivity of the natural pozzolan samples were compared before and after the sonochemical process, by using powder X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Thermal Gravimetry and Differential Thermal Analysis (TG/DTA). Compressive strength tests were performed to evaluate the properties of blended cements incorporating nano natural pozzolan. Under optimized conditions, the nano natural pozzolans showed a superior reactivity as compared with the bulk natural pozzolan. Also higher compressive strength was obtained for the cement specimen incorporating nano natural pozzolan.