Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

Chiral separations by capillary electromigration techniques in nonaqueous media. II. Enantioselective nonaqueous capillary electrochromatography

A review on the advantages, peculiarities, and the potential of enantioselective capillary electrochromatography (CEC) in nonaqueous media is presented. Some fundamentals on CEC with particular focus on enantioselective CEC are discussed. The strategies, concepts, preferentially utilized chiral selectors and column technologies that have been utilized to succeed in highly efficient enantiomer separations by nonaqueous CEC are described thoroughly.     

How to Control the Chemoselectivity of the Catalytic Formation of Chiral γ-Lactams or 2,3-Disubstituted Pyrroles by the Choice of Solvent

Summary. The reaction of the unsaturated imine methyl(3-phenylallylidene)amine with ethylene and carbon monoxide in the presence of catalytical amounts of Ru₃(CO)₁₂ leads to the formation of two heterocyclic products. One of the products is a chiral γ-lactam, the other one a 2,3-disubstituted pyrrole derivative, in which only the carbon atom from carbon monoxide is incorporated. The selectivity in the formation of the products may be controlled by the choice of solvent. In general, in nonpolar solvents the formation of the lactam is preferred whereas the use of more polar solvents enhances the yield of the pyrrole. For most of the solvents used there is a linear dependence of the product ratio on the relative permittivity of the corresponding solvent. Typically, polar aprotic solvents do not follow this rule.     

The solvent venting injection technique in capillary supercritical fluid chromatography

A solvent venting technique for injection of volumes up to 1 μl on 50 μm i.d. SFC columns has been compared to direct injection methods. The peak broadening and peak splitting observed with direct injection have been examined and found to be related to the starting pressure, the column temperature, and the sample solvent, in addition to the sample volume. The solvent venting technique removed peak splitting and improved the column efficiency. With a proper selection of experimental conditions, the sample recovery was 100%. The major part of the solvent was eluted in 15–20 s. Several applications have been demonstrated.     

Solid-phase microextraction coupled with high-performance liquid chromatography for the determination of phenylurea herbicides in aqueous samples

Solid-phase microextraction coupled with high-performance liquid chromatography was successfully applied to the analysis of nine phenylurea herbicides (metoxuron, monuron, chlorotoluron, isoproturon, monolinuron, metobromuron, buturon, linuron, and chlorbromuron). Polydimethylsiloxane-divinylbenzene (PDMS-DVB, 60 microm) and Carbowax-templated resin (CW-TPR, 50 microm) fibers were selected from four commercial fibers for further study because of their better extraction efficiencies. The parameters of the desorption procedure were studied and optimized. The effects of the properties of analytes and fiber coatings, carryover, duration and temperature of absorption, pH, organic solvent and ionic strength of samples were also investigated. External calibration with an aqueous standard can be used for the analysis of environmental samples (lake water) using either PDMS-DVB or CW-TPR fibers. Good precisions (1.0-5.9%) are achieved for this method, and the detection limits are at the level of 0.5-5.1 ng/ml.     

Photoreaction of 2′-chloro-4-R-benzanilide: synthesis of 2-(4-R-phenyl)-1,3-benzoxazole and 9-R-phenanthridin-6(5H)-one (R=H, CH3, CH3O)

The UV photolysis of 2′-chloro-4-R-benzanilides in acetonitrile solution under nitrogen atmosphere leads to the formation of intramolecular photocyclization products (9-R-phenanthridin-6(5)-one, 20–30%), along with the minor photoreduction, photo-Fries, and intramolecular photosubstitution products. The photoreaction of 2′-chloro-4-R-benzanilide in acetonitrile solution containing 10% of water or aqueous sodium hydroxide however gives 2-(4-R-phenyl)-1,3-benzoxazole as a major product (30%) along with the photoreduction, photo-Fries and intramolecular photocyclization products.     

Determination of atrazine, desethyl atrazine and desisopropyl atrazine in environmental water samples using hollow fiber-protected liquid-phase microextraction and high performance liquid chromatography

A new method based on hollow fiber-protected liquid-phase microextraction (LPME) was developed for the simultaneous determination of atrazine, desethyl atrazine and desisopropyl atrazine in environmental water samples. In LPME, analytes were extracted into 1-octanol immobilized in the micropores of a poly(vinylidene fluoride) porous hollow fiber membrane, and back extracted into the acceptor (4 M HCl) filled in the lumen of the hollow fiber. After LPME, the analytes trapped in the acceptor were analyzed with high-performance liquid chromatography after neutralization. The effect of extraction factors such as sample pH, acceptor pH, salinity, extraction time, stirring rate, and humic acid were studied. Under the optimized conditions, the limits of detection and relative standard deviations were respectively in the range of 0.5–1.0 μg L⁻¹ and 3.9–4.7% (n = 5). The proposed method was applied to determine atrazine, desethyl atrazine and desisopropyl atrazine in wastewater and groundwater samples. The three analytes were below the limits of detection, but good relative spiked recoveries over 90.1 ± 5.9% at 5 μg L⁻¹ spiked level were obtained.     

Studies of solvent effects

The effect of water on the conformational preferences of acetylcholine has been studied within the discrete, the continuum and the combined discrete-continuum models described in parts I and II of this series. All the models lead to the conclusion that the trans-gauche form which is, following refined quantum-mechanical computations, the intrinsically preferred one and the one observed in the crystal of acetylcholine and of a number of analogues should remain also the preferred conformation in water. This result agrees with NMR studies. The results of the empirical discrete model used here compare favorably to those obtained by an ab initio super-molecule treatment. The continuum model utilized here represents a net improvement above such models utilized in other works.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

On the theory of solvent effects

A simple electrostatic analysis is given of the virtual charge (solvaton) model to represent the environment effect on the electronic wave function of a solute immersed in a polarizable surrounding. New features of this model are found. The classical aspects are discussed and secondly the quantal implications are considered. A correct Hartree-Fock-like operator is derived which represents an electron in a molecular orbital subjected to the average effect of the other electrons and to the reaction field produced by the virtual charges on the atomic centers.A general formalism based on the preceding model is presented in appendix. The final equations have a form similar to Newton's equation to represent a solvated electron. Unlike some other theories in this field, there is no cut-off involved in the evaluation of the molecular integrals.