Thermodynamic parameters ΔΔH and ΔΔS as probes for the transition state in the reaction of N-phenyltriazolinedione with alkenes in nucleophilic solvents

The thermodynamic parameters, ΔΔH^# and ΔΔS^#, were determined for the interception of an intermediate, with the structural characteristics of an aziridinium imide, by nucleophilic solvents during the reaction of 2-methyl-2-butene with N-phenyltriazolinedione. The experimentally measured parameters were found to be in favor of an S_N2-‘like’ transition state and showed strong dependence on the bulkiness of the incoming molecule of the nucleophile-solvent.     

Coupling of flow injection wetting-film extraction without segmentation and phase separation to flame atomic absorption spectrometry for the determination of trace copper in water samples

A flow injection wetting-film extraction system without segmentor and phase separator has been coupled to flame atomic absorption spectrometry for the determination of trace copper. Isobutyl methyl ketone (MIBK) was selected as coating solvent and 8-hydroxyquinoline (oxine) as the chelating reagent. By switching of a 8-channel valve and alternative initiation of two peristaltic pumps, MIBK, sample solution containing copper chelate of oxine, and air-segment sandwiched eluting solution (1.0 mol l⁻¹ nitric acid) were sequentially aspirated into an extraction coil made of PTFE tubing of 360 cm length and 0.5 mm i.d. The formation of organic film in the wall of the extraction coil, extraction of the copper chelate into the organic film and back-extraction of the analyte into the eluting solution occurred consecutively when these zones aspirated into the extraction coil were propelled down the extraction coil by a carrier solution at a flow rate of 2 ml min⁻¹. After leaving the extraction coil, the concentrated zone was transported to the nebulizer at its free uptake rate for atomization. Under the optimized conditions, an enrichment factor of 43 and a detection limit of 0.2 μg l⁻¹ copper were achieved at a sample throughput rate of 30 h⁻¹. Eleven determinations of a standard copper solution of 60 μg l⁻¹ gave a relative standard deviation of 1.5%. Foreign ions possibly present in tap water and natural water did not interfere with the copper determination. The developed method has been successfully used to the determination of copper content of tap water and river water.     

Studies on the solvatochromism of Fe(CN)2(phen)2

Summary The influence of organic solvents on the electronic spectra of Fe(CN)₂(phen)₂ has been investigated by trichromatic colorimetry. The color parameters of these solutions have been calculated on the basis of the absorption spectra and are described in the CIE and CIELAB color spaces. It has been shown that one of the parameters (the so-called hue angle) could be related to some acidity parameters of solvents. Thus, it is possible to calculate the hue angle and, therefore, to predict the color of solution if the solvent acceptor number is known, or vice versa.

---

Untersuchung zur Solvatochromie von Fe(CN)₂(phen)₂

Zusammenfassung Der Einfluß organischer Lösungsmittel auf die UV-Spektren von Fe(CN)₂-(phen)₂ wurde mittels trichromatischer Kolorimetrie untersucht. Die Farbparameter der Lösungen wurden aus den Absorptionsspektren berechnet und werden in den CIE- und CIELAB-Farbräumen beschrieben. Es konnte gezeigt werden, daß einer der Farbparameter (der sogenannte Farbtonwinkel) zu den Aciditätsparametern des jeweiligen Lösungsmittels in Beziehung gesetzt werden kann. Es ist daher z.B. möglich, die Farbe der Lösung vorherzusagen, wenn die Akzeptorzahl des Lösungsmittels bekannt ist und umgekehrt.

     

Retention behavior and solvent optimization of organochlorine pesticides in solid-phase extraction

Summary Plots of capacity factor and retention time vs. elution solvent composition were proved to be useful to interpret the retention behavior of Kepone and its metabolites in a reversed-phase solid-phase extraction and to optimize the elution solvent. The percent recovery of Kepone was largely improved when the solvent was optimized. The standard deviations of the results of extractions were also improved upon the optimization of the solvent.     

Extraction and coordination studies of carbamoyl methyl sulfoxide (CMSO) with uranyl bis(β-diketonates). Synthesis and molecular structure of [{UO2(DBM)2}2C6H5CH2SOCH2CONHC6H5]

The carbamoyl methyl sulfoxide compounds of uranyl bis(β-diketonate) of the types [UO₂(DBM)₂CMSO] and [{UO₂(DBM)₂}₂CMSO] (where HDBM = C₆H₅COCH₂COC₆H₅; CMSO = C₆H₅CH₂SOCH₂CONHC₆H₅ or C₆H₅SOCH₂CONⁱPr₂) have been synthesized and characterized by IR and NMR spectroscopic techniques and elemental analysis. Spectral studies show that CMSO acts as a monodentate ligand in [UO₂(DBM)₂CMSO] compounds and bonds through the sulfoxo oxygen atom to the uranyl group. It acts as a bridging bidentate ligand in [{UO₂(DBM)₂}₂CMSO] compounds and bonds through both the sulfoxo and carbamoyl oxygen atoms to two different uranyl groups. The structure of the compound [{UO₂(DBM)₂}₂C₆H₅CH₂SOCH₂CONHC₆H₅] confirms the bridging bidentate mode of coordination for the CMSO ligand. Extraction studies show an enhancement in solvent extraction for the uranyl ion from nitric acid medium when a mixture of thenoyl trifluoroacetone (HTTA) and CMSO was employed.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at     

Absorption spectra of 2-styryl-4-phenyl-thiazole ethiodides in organic solvents of varying polarities and determination of the formation constant of the charge transfer complex formed

The electronic absorption spectra of some 2-styryl-4-phenyl-thiazole ethiodides are studied in organic solvents of different polarities. The shorter wavelength band appearing in the visible region is assigned to an intramolecular charge transfer (CT)-transition originating from the phenyl moiety to the positively charged hetero ring, while the longer wavelength one is due to an intermolecular CT-transition from the iodide ion to the 2-styryl-4-phenyl-thiazolinium cation. These assignments are based on the nature of the aldehydic residue and effects of solvent, concentration, and temperature on both the position and absorptivity of the CT complex-band. It is concluded that the CT complex formed will be highly solvated inDMF, DMSO, ethanol and methanol relative to in CHCl₃, dioxane and acetone. The formation constant of the CT complex in solutions of different polarities is determined at different temperatures. Furthermore, the thermodynamic parameters H ^o, G ^o and S ^o for complex formation are calculated and discussed.

---

Absorptionsspektren von 2-Styryl-4-phenyl-thiazol-ethiodiden in verschiedenen Lösungsmitteln und Bestimmung der Bildungskonstanten der Charge-Transfer-Komplexe

Zusammenfassung Die Elektronenanregungsspektren einiger substituierter 2-Styryl-4-phenyl-thiazol-ethiodide wurden in einigen Lösungsmitteln unterschiedlicher Polarität untersucht. Die Absorption bei kürzerer Wellenlänge wird einem intramolekularen Charge-Transfer (CT)-Übergang zugeordnet, die langwellige Bande einem intermolekularen CT-Übergang (Jodid—organ. Kation). Die Diskussion erfolgt basierend auf Substitutions-, Lösungsmittel-, Konzentrations-, und Temperatur-Effekten. Die Komplexbildungskonstanten und die thermodynamischen Parameter H ^o, G ^o und S ^o werden angegeben.

     

NMR studies of solid state—solvent and H/D isotope effects on hydrogen bond geometries of 1:1 complexes of collidine with carboxylic acids

¹H and ¹⁵N NMR spectra of 10 complexes exhibiting strong OHN hydrogen bonds formed by ¹⁵N-labeled collidine and different proton donors, partially deuterated in mobile proton sites, have been observed by low-temperature NMR spectroscopy using a low-freezing CDF₃/CDF₂Cl mixture as polar aprotic solvent. The following proton donors have been used: HCl, formic acid, acetic acid, various substituted benzoic acids and HBF₄. The slow hydrogen bond exchange regime could be reached below 140 K, which allowed us to resolve ¹⁵N signal splittings due to H/D isotopic substitution. The valence bond order model is used to link the observed NMR parameters to hydrogen bond geometries. The results are compared to those obtained previously [Magn. Reson. Chem. 39 (2001) S18] for the same complexes in the organic solids. The increase of the dielectric constant from the organic solids to the solution (30 at 130 K) leads to a change of the hydrogen bond geometries along the geometric correlation line towards the zwitterionic structures, where the proton is partially transferred from oxygen to nitrogen. Whereas the changes of spectroscopic and, hence, geometric parameters are small for the systems which are already zwitterionic in the solid state, large changes are observed for molecular complexes which exhibit almost a full proton transfer from oxygen to nitrogen in the polar liquid solvent.     

Rapid determination of desorption efficiency, and analysis of solvent mixtures for occupational exposure studies

Summary An analytical procedure has been developed for simultaneous determination of solvent mixture vapors to enable evaluation of occupational exposure. To determine the desorption efficiency the volatile components of the solvent mixtures were generated from a glass tube filled with glass wool. This device is easy to prepare and use. These vapors were then collected in activated charcoal tubes and analyzed by capillary gas chromatography. The method was tested with a mixture of 22 solvents, including aliphatic and aromatic hydrocarbons, alcohols, ethers, esters, and ketones, all at low concentrations. All the components were detected. When a 99∶1 mixture of carbon disulfide-dimethylformamide was used for desorption the efficiency was>75% for most of the solvents.     

Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday