Solvent free synthesis,characterization, DFT,cyclic voltammetry and biological assay of Cu(II), Hg(II) and UO2(II) – Schiff base complexes

A series of metal ion complexes was prepared in solid state from Cu(II), Hg(II) and UO₂(II) ions with 3-oxo-3-(2-(2-oxoindolin-3-ylidene)hydrazineyl)-N-phenylpropanamide (H₃L) ligand through solvent free synthesis methodology. The chemical formulae of the new compounds were estimated according to variable spectral and analytical investigations. The ligand exhibited a neutral or mononegative tetradentate mode of coordination towards the central ions inside the octahedral arrangement that proposed for the three complexes. The DFT/B3LYP method was applied under different basis sets (6-31G*or SDD) to optimize the structures of new compounds except the UO₂(II) complex. The computational data were investigated to verify the binding mode that suggested spectrally. Moreover, studies in solution regarding Cu(II) ion via cyclic voltammetry were performed in absence or presence of H₃L, to realize the significant effect of complex formation on the electrochemical manners of copper. The shifts in the potential peaks accompanied by the changes in the values of parameters correspond to kinetic and thermodynamic. Also, the solvation and kinetic characteristics for the cathodic and anodic potential of Cu(II) ion in absence or presence of H₃L at different scan rates, were estimated. Finally, the ligand and copper ion exhibited high affinity towards complexation in solution. Furthermore, the activity of the new compounds towards inhibiting microbes was studied against Staphylococcus aureus (G+) and Escherichia coli (G-) bacteria as well as Candida albicans (fungus) by determining the inhibition zone diameter. Also, both the antioxidant and cytotoxic activity of the isolated compounds were evaluated. Commonly, a remarkable antimicrobial and anticancer activity was appeared with UO₂(II) complex and the ligand. While, the antioxidant activity of all compounds appeared lower.     

Phase‐controlled crystallization of amorphous calcium carbonate in ethanol‐water binary solvents

The evolution of amorphous calcium carbonate (ACC) into crystals in ethanol/water binary solvents under ambient temperature was investigated, and it was found to depend on the volume ratio of ethanol to water (R). Calcite remained dominant when the amount of water was high (R = 1/3). A slight change in the amount of ethanol (R = 3/1) could lead to a dramatic change in the polymorph from calcite to aragonite. However, when poly (allylamine hydrochloride) (PAH) was added at R = 3/1, almost pure vaterite could be obtained, which has a specific morphological variation (from hollow microspheres to cloud‐like). This study provides an alternative polymorphic route for the CaCO₃ mineral by using the evolution of ACC in different solvent environments, which provides some useful clues for understanding the importance of kinetic control of the morphologies and polymorphs of a wide range of inorganic materials. In addition, this simple mild phase‐controlled synthetic method could be scaled up as a green chemistry route for the industrial production of different polymorphs of CaCO₃.     

Shifting of gas chromatographic retention times due to solvent effects — a study using sulfur chemiluminescence detection

Gas chromatrography (GC) with sulfur chemiluminescence detection (SCD) is an outstanding combination for selectively determining trace concentrations of sulfur compounds in hydrocarbon samples. GC peaks can be identified by retention times when reproducible, automated injection techniques are used. However, as described in this work, analysts should be on the look out for retention shifting due to solvent effects from sample components. Three examples of retention shifting are presented: (1) thiophene by benzene; (2) methylthiophenes by toluene; and (3) dibenzothiophene by gas oil. Depending on samples and analysis conditions, retention shifts from a few hundredths to 1.5 min have been observed. Such retention shifts are likely to cause errors in peak identifications. Therefore, when using SCD, simultaneous FID monitoring is recommended as an aid in evaluating chromatograms for possible retention shifting due to solvent effects.     

Chromatographic chemical characterization of solvent refined coal I and II liquids for toxicological testing

Summary High resolution gas chromatography and gas chromatography/mass spectrometry were employed to determine the components in samples of solvent refined coal (SRC) II naphtha, middle distillate, heavy distillate, and fuel oil blend and SRC-I light oil, wash solvent, and process solvent in concentrations higher than approximately 0.5%. Quantitation was based on the addition of n-alkane internal standards and peak area response of a flame ionization detector with the use of fused silica and glass capillary columns coated with SE-52 and SF-96. The major differences in the SRC-I and II materials were the molecular weight ranges and sizes of the chemical components found in the products, an effect of the differences in the nominal boiling ranges of the materials. Alkanes, alkenes, hydroxylated aromatics, hydrogenated and polycyclic aromatic hydrocarbon ring systems, and alkylated derivatives of the above were found in greatest concentration in the unfractionated materials. Sulfur and nitrogen heteroatomic species were in greates concentration in the higher nominal boiling range materials. A major purpose of these investigations was to develop a method to obtain data on the composition of these complex sample matrices for use in designing studies for toxicological evaluation of these materials.     

纤维素溶剂研究进展

概述了纤维素溶剂的重要研究进展,主要包括N-甲基吗啉-N-氧化物(NMMO)在85℃以上高温可破坏纤维素分子间氢键,导致溶解;氯化锂/二甲基乙酰胺(LiCl/DMAc)在100℃以上可溶解纤维素;1-丁基-3-甲基咪唑盐酸盐([BMIM]Cl)和1-烯丙基-3-甲基咪唑盐酸盐([AMIM]Cl)离子液体,含强氢键受体Cl-离子,通过它们与纤维素羟基作用而引起溶解.氨基甲酸酯体系则是通过尿素与纤维素在100℃以上反应转变为纤维素氨基甲酸酯,然后再溶解于NaOH水溶液中;氢氧化钠/水体系,只能溶解结晶度和聚合度较低的纤维素;NaOH/尿素、NaOH/硫脲和LiOH/尿素水溶液体系,它们预冷至-5~-12℃后可迅速溶解纤维素.主要是通过低温产生小分子和大分子间新的氢键网络结构,导致纤维素分子内和分子间氢键的破坏而溶解,同时尿素或者硫脲作为包合物客体阻止纤维素分子自聚集使纤维素溶液较稳定.低温溶解技术不仅突破了加热溶解的传统方法,而且可推进化学"绿色化"进程.共引用参考文献50篇.     

Free radical oxidation reaction for selectively solvatochromic sensors with dynamic sensing ability

A novel BODIPY (boradiazaindacene) dye denoted as BODIPY-DT containing terpyridine unit has been designed and characterized. The dye is found to be selective and visual solvatochromic sensor toward DMF among test organic solvents. The sensing process displays time-controllable, dynamic signal outputs in the emission colors including red, purple, yellow and even white emission colors. It is presented that selective free radical oxidation reaction happens during the recognition process.     

MXene: A two-dimensional material in selective water separation via pervaporation

MXene, well-identified as Ti₃C₂T_X, belongs to the family of two-dimensional (2D) materials, which have been currently explored in various applications. Very recently, such materials have been pointed out as potential nanomaterials for advanced solute separations when introduced in membranes, such as ion separation, gas separation, nanofiltration, chiral molecular separation, and solvent separation. This latter separation, generally named Pervaporation (PV), is identified as a highly selective technology for water separations. To date, few pieces of research have been released but providing interesting insights into several solvent (including water) separations. Hence, this brief review aims to analyze and discuss the latest advances for utilizing MXenes for PV membranes. Particular emphasis has been devoted to the relevant outcomes in the field, along with the strategies followed by researchers to tailor membranes. Based on the current findings, the perspectives in the field are also stated.     

Uncatalyzed, anti-Michael addition of amines to β-nitroacrylates: practical, eco-friendly synthesis of β-nitro-α-amino esters

A variety of primary and secondary amines give the conjugate reaction with β-nitroacrylates, via an anti-Michael addition, without any catalyst and/or solvent, allowing good yields of β-nitro-α-amino esters.     

Solvent Effects on the Structure-Activity Relationship of Phenytoin-like Anticonvulsant Drugs

The absorption spectra of nine compounds structurally related to phenytoin (5,5-diphenylhydantoin) were recorded in twelve solvents over the range of 200 to 400 nm. The effects of solvent dipolarity/polarizability and solvent/solute hydrogen bonding interactions were analyzed by means of the linear solvation energy relationship (LSER) concept proposed by Kamlet and Taft. The lipophilic activity of the investigated hydantoins was estimated by calculation of their log ₁₀ P values. The calculated values of log ₁₀ P were correlated with the ratio of the contributions of specific and non-specific solute/solvent interactions. The correlation equations were combined with the corresponding ED₅₀ values to generate new equations that demonstrate exact relationship between solute/solvent interactions and the structure-activity parameters.