Solvent free synthesis,characterization, DFT,cyclic voltammetry and biological assay of Cu(II), Hg(II) and UO2(II) – Schiff base complexes

A series of metal ion complexes was prepared in solid state from Cu(II), Hg(II) and UO₂(II) ions with 3-oxo-3-(2-(2-oxoindolin-3-ylidene)hydrazineyl)-N-phenylpropanamide (H₃L) ligand through solvent free synthesis methodology. The chemical formulae of the new compounds were estimated according to variable spectral and analytical investigations. The ligand exhibited a neutral or mononegative tetradentate mode of coordination towards the central ions inside the octahedral arrangement that proposed for the three complexes. The DFT/B3LYP method was applied under different basis sets (6-31G*or SDD) to optimize the structures of new compounds except the UO₂(II) complex. The computational data were investigated to verify the binding mode that suggested spectrally. Moreover, studies in solution regarding Cu(II) ion via cyclic voltammetry were performed in absence or presence of H₃L, to realize the significant effect of complex formation on the electrochemical manners of copper. The shifts in the potential peaks accompanied by the changes in the values of parameters correspond to kinetic and thermodynamic. Also, the solvation and kinetic characteristics for the cathodic and anodic potential of Cu(II) ion in absence or presence of H₃L at different scan rates, were estimated. Finally, the ligand and copper ion exhibited high affinity towards complexation in solution. Furthermore, the activity of the new compounds towards inhibiting microbes was studied against Staphylococcus aureus (G+) and Escherichia coli (G-) bacteria as well as Candida albicans (fungus) by determining the inhibition zone diameter. Also, both the antioxidant and cytotoxic activity of the isolated compounds were evaluated. Commonly, a remarkable antimicrobial and anticancer activity was appeared with UO₂(II) complex and the ligand. While, the antioxidant activity of all compounds appeared lower.     

Phase‐controlled crystallization of amorphous calcium carbonate in ethanol‐water binary solvents

The evolution of amorphous calcium carbonate (ACC) into crystals in ethanol/water binary solvents under ambient temperature was investigated, and it was found to depend on the volume ratio of ethanol to water (R). Calcite remained dominant when the amount of water was high (R = 1/3). A slight change in the amount of ethanol (R = 3/1) could lead to a dramatic change in the polymorph from calcite to aragonite. However, when poly (allylamine hydrochloride) (PAH) was added at R = 3/1, almost pure vaterite could be obtained, which has a specific morphological variation (from hollow microspheres to cloud‐like). This study provides an alternative polymorphic route for the CaCO₃ mineral by using the evolution of ACC in different solvent environments, which provides some useful clues for understanding the importance of kinetic control of the morphologies and polymorphs of a wide range of inorganic materials. In addition, this simple mild phase‐controlled synthetic method could be scaled up as a green chemistry route for the industrial production of different polymorphs of CaCO₃.     

Application of solvent evaporation technique for pure drug crystal spheres preparation

An innovative application of the solvent evaporation technique was suggested. Solvent evaporation technique is a technique for drug encapsulation and nanosphere preparation. The widely used technique is also facing the problem of low actual drug entrapment percent, which is not economic from the industrial view. The goal of this work is trying to use the advantage of this technique concerning the product sphericity and the ability to control particle size, to prepare a drug as pure crystals spheres. Ibuprofen is selected as a model drug. The spheres are formed by using Polyvinyl pyrrolidone (PVP) or Polyethylene glycol (PEG) as an anti-aggregating agent but not formed on using tween or span. Particle size and actual drug content depend on the concentrations the anti-aggregating agent used. Surfaces of the drug crystal spheres are porous with empty sphere internal structure on using PVP but spongy and rough on using PEG. The drug has its identity chemical form in the drug crystal spheres. IR scan of spheres prepared on using PEG showed a characteristic ether peak. DSC showed melting endothermic peak of PEG, but X-ray showed minor change in the drug crystal patterns. Drug release profiles from crystal spheres prepared with the same anti-aggregating agent are close to each other. The drug release profiles from drug crystal spheres prepared by using PEG are more controlled than that prepared by using PVP. The drug release mechanism is diffusion. It was concluded that, the same technique could be suggested for preparation of other biomedical material in pure crystals spheres with controlled particle size. These properties may encourage to prepare very small particles with spherical shape for inhalation or injection as an innovative particle technology application for the widely used technique.     

Shifting of gas chromatographic retention times due to solvent effects — a study using sulfur chemiluminescence detection

Gas chromatrography (GC) with sulfur chemiluminescence detection (SCD) is an outstanding combination for selectively determining trace concentrations of sulfur compounds in hydrocarbon samples. GC peaks can be identified by retention times when reproducible, automated injection techniques are used. However, as described in this work, analysts should be on the look out for retention shifting due to solvent effects from sample components. Three examples of retention shifting are presented: (1) thiophene by benzene; (2) methylthiophenes by toluene; and (3) dibenzothiophene by gas oil. Depending on samples and analysis conditions, retention shifts from a few hundredths to 1.5 min have been observed. Such retention shifts are likely to cause errors in peak identifications. Therefore, when using SCD, simultaneous FID monitoring is recommended as an aid in evaluating chromatograms for possible retention shifting due to solvent effects.     

Influence of solvent on solution processed Cu2ZnSnS4 nanocrystals and annealing induced changes in the optical,structural properties of CZTS film

The well-known quaternary Cu₂ZnSnS₄ (CZTS) chalcogenide thin films are playing an important role in modern technology. The CZTS nanocrystal were successfully prepared by solution method using water, ethylene glycol and ethylenediamine as different solvent. The pure phase material was used for thin film coating by thermal evaporation method. The prepared CZTS thin films were characterized by XRD, Raman spectroscopy, FESEM, XPS and FT-IR spectroscopy. The XRD and Raman spectroscopy analysis revealed the formation of polycrystalline CZTS thin film with tetragonal crystal structure after annealing at 450 ^°C. The oxidation state of the annealed film was studied by XPS. A direct band gap about 1.36 eV was estimated for the film from FT-IR studies, which is nearly close to the optimum value of band gap energy of CZTS materials for best solar cell efficiency. The CZTS annealed thin films are more suitable for using as a p-type absorber layer in a low-cost solar cell.     

Chromatographic chemical characterization of solvent refined coal I and II liquids for toxicological testing

Summary High resolution gas chromatography and gas chromatography/mass spectrometry were employed to determine the components in samples of solvent refined coal (SRC) II naphtha, middle distillate, heavy distillate, and fuel oil blend and SRC-I light oil, wash solvent, and process solvent in concentrations higher than approximately 0.5%. Quantitation was based on the addition of n-alkane internal standards and peak area response of a flame ionization detector with the use of fused silica and glass capillary columns coated with SE-52 and SF-96. The major differences in the SRC-I and II materials were the molecular weight ranges and sizes of the chemical components found in the products, an effect of the differences in the nominal boiling ranges of the materials. Alkanes, alkenes, hydroxylated aromatics, hydrogenated and polycyclic aromatic hydrocarbon ring systems, and alkylated derivatives of the above were found in greatest concentration in the unfractionated materials. Sulfur and nitrogen heteroatomic species were in greates concentration in the higher nominal boiling range materials. A major purpose of these investigations was to develop a method to obtain data on the composition of these complex sample matrices for use in designing studies for toxicological evaluation of these materials.     

纤维素溶剂研究进展

概述了纤维素溶剂的重要研究进展,主要包括N-甲基吗啉-N-氧化物(NMMO)在85℃以上高温可破坏纤维素分子间氢键,导致溶解;氯化锂/二甲基乙酰胺(LiCl/DMAc)在100℃以上可溶解纤维素;1-丁基-3-甲基咪唑盐酸盐([BMIM]Cl)和1-烯丙基-3-甲基咪唑盐酸盐([AMIM]Cl)离子液体,含强氢键受体Cl-离子,通过它们与纤维素羟基作用而引起溶解.氨基甲酸酯体系则是通过尿素与纤维素在100℃以上反应转变为纤维素氨基甲酸酯,然后再溶解于NaOH水溶液中;氢氧化钠/水体系,只能溶解结晶度和聚合度较低的纤维素;NaOH/尿素、NaOH/硫脲和LiOH/尿素水溶液体系,它们预冷至-5~-12℃后可迅速溶解纤维素.主要是通过低温产生小分子和大分子间新的氢键网络结构,导致纤维素分子内和分子间氢键的破坏而溶解,同时尿素或者硫脲作为包合物客体阻止纤维素分子自聚集使纤维素溶液较稳定.低温溶解技术不仅突破了加热溶解的传统方法,而且可推进化学"绿色化"进程.共引用参考文献50篇.     

丙酮CO键在溶剂中频移变化的几种理论模型比较

测量了丙酮在16种溶剂中CO键的伸缩振动拉曼光谱,并且在Gaussian03程序下采用自恰反应场方法(SCRF)对丙酮在各种溶剂中的拉曼光谱进行了理论计算。用三种溶剂模型的电子给体-受体模型、Kirkwood模型和自恰反应场模型对实验结果进行了分析比较,结果表明Gutmann提出的电子给体-受体模型与实验结果符合的最好,而自恰反应场理论结果要好于Kirkwood模型。通过对三种模型的机理进行分析,得出给体-受体模型在解释电负性比较强的分子键振动光谱比较好,自恰反应场模型不但考虑了介电常数ε,而且考虑了分子大小、构型等因素的影响,模型复杂,计算量比较大,但是因为考虑的因素比较多,所以与实验结果也符合的比较好,而Kirkwood模型的主要参数为ε,模型简单,计算简便,能大致反映频移的趋势,说明介电常数是影响频移的一个主要因素。     

烯/炔基有机共轭分子双光子吸收特性的理论研究-溶剂效应

The present work concerns the study of solvent effects on the geometrical structures, as well as one- and two-photon absorption (TPA) processes, for two series of alkyne and alkene π-bridging molecules, within the framework of the polarization continuum model. Particular emphasis was put on the characterization of solvent effects on the molecular geometrical structures and geometric distortion, which were measured by the bond-length-alternation parameter. The π centres in the compounds are seen to play a decisive role in increasing the TPA cross section and nonlinear optical properties. All studied molecules have relatively strong TPA characteristics, while the alkyne π-bridging ones yield larger TPA cross sections.     

红外光谱中溶剂效应机理初探——配位机制的提出

本文就红外光谱中溶剂效应机理提出了溶质和溶剂分子间的瞬时配位作用机制，认为同－溶质在不同溶剂中的振动波数不同，是由于这种瞬时配位作用改变了溶质价电子运动状态所致。据此提出了溶剂效砂的定量关系式，测定了七种溶剂配位效应常数。用这一套经验参数处理了几种取代苯甲酸的羰基伸缩振动的溶剂效应，得较好的线性关系。还发现羰基的振动波数与取代基的Ｈａｍｍｅｔｔ常数σ之间，羰基伸缩振动对溶剂效应的敏感度与σ之间，Ｈ