一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

四种溴代甲苯异构体的质谱区分

本工作用四种较新的质谱技术(碰撞诱导解离(CID),电荷剥离(CS),电荷分离(CSe),电子捕获诱导解离(ECID)谱研究了邻、间、对溴甲苯和溴化苄四种异构体。四种技术在一定程度上都可区分这些异构体。其中比较四种异构体ECID谱中ECID峰的相对强度可得到满意的区分效果。     

A Large Conformational Change of a Bridged β-Cyclodextrin Dimer in Aqueous Solution

A novel bridged β-CD dimer in which two β-cyclodextrins were linked by a naphthalene at positions 2 and 7 has been synthesized. 1H and 13CNMR measurements showed that a large change in the conformation of the dimer occurred in aqueous solution. The dimer interacted with methyl and ethyl orange to form stable inclusion complexes via "induced fit" mechanism.     

一种含有亚微米孔洞的新型微孔磷酸盐晶体材料的合成及其生长机理

采用水热法成功地合成了一种含有亚微米级孔洞的微孔磷酸盐晶体材料(记为HAP-TAP),其形貌特征是:六棱柱形的晶体表面分布着大量0.4～0.8μm的亚微米级孔洞,孔洞内长有片层状晶体.在样品晶化的过程中,通过控制合成时间,获得了纯六棱柱形晶体的大单晶(记为HAP).使用扫描电子显微镜(SEM)、粉末X射线衍射(XRD)、红外光谱和电子能谱(EDX)对HAP-TAP独特形貌的形成机理进行了研究和揭示.HAP的单晶XRD数据表明,HAP是一种具有二维空旷骨架结构的新型微孔磷酸铝晶体,其分子式为Al5(OH)2(PO4)7(C2N2H10)3.0.5H2O.EDX分析结果表明,生长于六棱柱形晶体孔洞内的片层状晶体为磷酸钛铝材料.     

环氧乙烷和环氧丙烷共聚体系的等温结晶和熔融

环氧乙烷（ＥＯ）和环氧丙烷（ＰＯ）共聚体系的等温结晶前期符合Ａｖｒａｍｉ方程。ＰＯ组分含量增加，Ａｖｒａｍｉ指数ｎ值由１．８到２．４，体系的结晶生长速率与共聚体系的组成和结晶度有关，ＥＯ／ＰＯ共聚体系的平衡熔点随ＰＯ含量的增加而降低。随Ｔｃ增大，△Ｈｍ与△Ｓｍ呈线性降低。     

PAMAM树形分子对CaCO3结晶影响的研究

研究了不同端基的聚酰胺胺(PAMAM)树形分子对CaCO₃在水溶液中结晶的影响。分别利用傅立叶变换红外光谱(FTIR)、X-射线衍射(XRD)、扫描电镜(SEM)等测试手段对样品进行了分析。结果表明:没有树形分子存在时CaCO₃是粒径为10μm的菱形方解石晶体;端基为-COONa的树形分子存在时CaCO₃则是粒径为1～2μm的球形球霰石晶体;-COOCH₃端基PAMAM树形分子存在时得到的CaCO_{3相似文献}   

激光诱导等离子体中的电子密度和电子温度的测量

脉冲激光诱发等离子体的谱诊断技术用来对其电子密度和电子温度的测量结果与理论计算进行了比较，同时讨论了运用这个方法的物理条件．     

Solvent Effects on the Absorption Spectrum of the Product and the Equilibrium Constant for the Proton Transfer Reaction from 1-Phenacylquinolinium Bromide to Amines

The equilibrium constants, K ₂, have been determined for the proton-transfer reactions of 1-phenacylquinolinium ion, PHQ⁺, with several amines {triethylamine (TEA), N,N,N′,N′-tetramethylethylenediamine (ED), N,N,N′, N′-tetramethylpropanediamine (PD), N,N,N′,N′-tetramethylbutanediamine (BD), and 1,8-bis(dimethylamino-naphthalene (DMAN)} in acetonitrile (AN), AN-tetrahydrofuran (THF) and AN-ethanol (EtOH) mixtures. The reaction was followed spectrophotometrically using a stopped-flow technique. The K ₂ value decreased for DMAN and increased for TEA with increasing vol-% of THF in AN-THF mixtures. The changes in the K ₂ value for ED, PD and BD changed in the order: ED, PD and BD from a pattern similar to TEA to a pattern similar to DMAN. The change in the K ₂ value for DMAN with increasing vol-% of THF in AN-THF mixtures was explained by the effect of polarity on the stability of P⁻Q⁺ (the deprotonated product of PHQ⁺). The effect of THF on the K ₂ value is consistent with that of the peak wavelength of the absorption spectrum of P⁻Q⁺. The change in the K ₂ value for TEA, ED, PD and BD depended on the structures of the protonated bases, one of the products for this reaction. The effect of EtOH on the K ₂ value for DMAN was examined in ternary EtOH-THF-AN mixtures that contain different amounts of EtOH and whose relative permittivities were adjusted to that of EtOH. The K ₂ value increased with increasing vol-% of EtOH because of the stabilization of P⁻Q⁺ upon the formation of the hydrogen-bonded complex with EtOH. The absorption spectrum of P⁻Q⁺ demonstrated a blue shift as the vol-% of EtOH increased.     

Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.     

KINETICS OF NON-ISOTHERMAL CRYSTALLIZATION OF POLY (ETHYLENE TEREPHTHALATE) MODIFIED BY POLY (ETHYLENE GLYCOL)

The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship between the reciprocal of t 1/2 ( the half life of crystallization) and the appropriate temperature variable. The parameters such as the activation energy (Ed) for transport, the equilibrium melting temperature (T_m~0),the nucleation parameter (ψ),themaximum crystallization temperature (T_(e, max)), and the kinetic crystallizability (G) for the copolyesters were obtained. The influence of the PEG content in PET chains on the parameters characterizing crystallization kinetics and crystallization thermodynamics was discussed.