使用曲面微通道板和感应电荷位置灵敏阳极的软X射线-极紫外光子计数成像探测器研究

本项目对我国空间探测的极紫外(EUV)波段大视场相机所需求的球面光子计数成像探测器的关键技术进行了研究。首先,建立了光阴极材料次级电子产出模型,利用该模型计算了软X射线-EUV波段常用的光电阴极材料—碱卤化物的次级电子产出,分析了微通道板(MCP)的次级电子产出。建立了测量MCP量子探测效率的装置,并推导出MCP量子探测效率的计算公式,测量了MCP在软X射线-EUV波段的量子效率以及MCP量子效率随掠入射角的变化。其次,建立了球面实芯微通道板的制备装置,利用高温热成型方法制备出曲率半径为150 mm球面MCP,利用光刻技术制备出有效直径为48 mm的楔条形感应电荷位置灵敏阳极,在此基础上集成了一套使用球面MCP和感应电荷位置灵敏阳极的两维光子计数成像探测器。再次,研制出包括快速前端模拟电路与后续数字电路的成像读出电路,编制了能矫正图像畸变的图像实时采集和处理软件。最后,建立了MCP探测器空间分辨率、图像线性的检测装置,对研制出的探测器性能进行了检测,检测结果表明:探测器的各项技术指标完全满足要求。     

Observation of inverse Meyer–Neldel rule in thermally activated crystallization of a hybrid composite of phenol formaldehyde

We report the inverse Meyer–Neldel (MN) rule in the thermally activated crystallization of a hybrid composite of phenol formaldehyde using two experimental approaches. In the first experiment, the annealing time dependence of the pre-exponential factor K ₀ and the activation energy of crystallization E _c were studied. In the second experiment, the annealing temperature dependence of the same parameters was investigated. We observed the inverse Meyer–Neldel rule between the pre-exponential factor K ₀ and the activation energy of crystallization E _c in both cases.     

高功率脉冲激光对阶跃折射率多模光纤损伤机理

 理论分析和模拟仿真研究了激光点火系统中光纤端面损伤、光纤初始输入段损伤和光纤内部损伤机理。结果显示：端面损伤主要是由光纤端面的杂质和缺陷引起；光纤初始输入段损伤是由光束的初次反射造成光纤局部激光能量密度增大引起的；光纤内部体损伤主要由于激光自聚焦效应引起损伤和光纤受到的意外应力产生微小碎片，吸收激光能量，引起光纤局部损伤。给出了激光点火系统中提高光纤损伤阈值的一般方法，主要包括光纤端面处理、设计合理的激光注入耦合装置。     

激光能量对激光诱导Cu等离子体特征辐射强度、电子温度的影响

利用Nd:YAG激光(波长1 064 nm,脉宽10 ns)烧蚀金属Cu靶获得等离子体 .改变激光脉冲能量,观测到Cu的原子谱线和离子谱线随激光脉冲能量有不同的变化关系, 但都在330 mJ/pulse时,谱线强度达到最大,随后在330 mJ～370 mJ/pulse间出现一小平台 ,能量继续增加,各谱线强度减小.同时,使用烧蚀Cu靶产生的五条原子谱线(465.11 nm,5 10.55 nm,515.32 nm,521.82 nm,529.25 nm)的相对强度,在局部热力学平衡近似下,利用B oltzmann图的最小二乘法拟合,测定了不同激光能量下Cu等离子体的电子温度.随激光能量的增加,电子温度近似单调地从1.02×104 K上升到1.46×104 K后,反而有所下降.     

多个量子节点确定性纠缠的建立

量子纠缠是一种重要的量子资源,在多个空间分离的量子存储器间建立确定性的量子纠缠,然后在用户控制的时刻将所存储的量子纠缠转移到量子信道中进行信息的分发和传送,这对于实现量子信息网络是至关重要的.本文介绍了用光学参量放大器制备与铷原子D1吸收线对应的非经典光场,而且在三个空间分离的原子系综中确定性量子纠缠的产生、存储和转移.利用电磁感应透明光和原子相互作用的原理,将制备的多组分光场纠缠态模式映射到三个远距离的原子系综以建立原子自旋波之间的纠缠.然后,存储在原子系综中的纠缠态通过三个量子通道,纠缠态的量子噪声被转移到三束空间分离的正交纠缠光场.三束释放的光场间纠缠的存在验证了该系统具有保持多组分纠缠的能力.这个方案实现了三个量子节点间的纠缠,并且可以直接扩展到具有更多节点的量子网络,为未来实现大型量子网络通信奠定了基础.     

Effect of solvent on the construction of Co(II) coordination polymers containing a semi-rigid bis(benzimidazole) derivative: syntheses,structures, and properties

Two Co(II) coordination polymers, [CoL(npa)]·2H₂O (1) and [CoL(Hnpa)₂] (2) (L = 1,4-bis(5,6-dimethylbenzimidazole-1-yl)benzene, H₂npa = 5-nitroisophthalic acid), have been synthesized in different solvent systems and characterized by Infrared (IR) spectroscopy, elemental analysis, and powder and single crystal X-ray diffraction. Compound 1 was synthesized under solvothermal conditions with DMF as solvent and had a pair of L ligands adopting a μ₂-bridging mode and connecting two Co²⁺ cations to generate a 26-membered Co₂L₂ loop. The npa^2? link adjacent Co₂L₂ loops via a bis(monodentate) bridging mode to create a 1-D channel-like chain structure. Compound 2 was obtained under hydrothermal conditions, and the carboxylate of the monodeprotonated Hnpa^? adopt a μ₁-η^0?:?η¹ coordination to connect adjacent Co²⁺ cations into a 2-D polymeric layer. The μ₂-bridging L ligands connect adjacent 2-D [Co(Hnpa)]_n polymeric layers into a 3-D NaCl-like framework. The Co²⁺ cations and the L ligands in compounds 1 and 2 exhibit different coordination geometries and conformations. Effects of solvents on the construction of Co(II) coordination polymers were investigated. In addition, the electrochemical behavior of carbon paste electrodes containing 1 and 2 and the thermal stabilities of 1 and 2 were investigated.     

HfO_2单层膜的吸收和激光损伤阈值测试

薄膜吸收是降低膜层激光损伤阈值的重要原因,为了研究薄膜吸收对激光损伤阈值的影响,对HfO2单层膜在1 064 nm处的吸收及其在不同波长激光辐照下的损伤阈值进行了测试和分析。研究结果表明:薄膜的激光损伤阈值由薄膜吸收平均值(决定于薄膜中缺陷的种类和数量)和吸收均匀性(决定于薄膜中缺陷的分布)共同决定;根据HfO2单层膜在1064 nm波长处的吸收值,不但可以定性判断薄膜在1 064 nm波长,而且还可以判断在其它波长激光辐照下的抗激光损伤能力。     

Effects of nickel on the crystallization of Zr70Cu20Ni10 amorphous alloy

Differential scanning calorimetry (DSC) and x-ray diffraction (XRD) are employed to investigate the effects of nickel on the crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy. We have found that the crystallization process of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy is strongly influenced by the addition of nickel. Addition of 10 at% Ni to the Zr₇₀Cu₃₀ amorphous alloy makes the crystallization process proceed from a single-stage mode to a double-stage mode. The activation energy for crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy is calculated to be about 388kJ·mol^-1 on the basis of the Kissinger equation. The effects of nickel on the crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy are discussed in terms of the genetics of metals.     

瞬态荧光方法研究溶剂诱导的三苯胺衍生物的对称性破缺电荷转移动力学

在缺乏特征红外振动的情况下追踪具有四极或八极对称性分子的激发态对称性破缺电荷转移通常是很困难的.本文以一种具有八极对称性的三苯胺衍生物为研究对象,利用飞秒时间分辨瞬态荧光光谱方法获得发光跃迁偶极矩的演化动力学,进而实时表征了其溶剂诱导对称性破缺电荷转移的动力学过程.当该分子处于弱极性甲苯溶液中时,在激发态弛豫过程中其发射偶极矩变化较小;当处于较强极性的四氢呋喃溶液中时,其发射偶极矩在数皮秒内快速减小.在对比单体偶极分子的荧光动力学后,推断八极分子的发光态在强极性溶剂中经历溶剂诱导的结构变化,由激子耦合的八极对称性降低至激发定域的偶极对称性;而在较弱极性的溶剂中,其八极对称性在溶剂化稳定中得以较大程度的保持.     

Polymer-Nanoparticle Composites Composed of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Coated Silver Nanoparticles

The effects of addition of synthesized organic-suspension silver nanoparticles on the crystallization and thermal stability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were studied by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (XRD), UV-Vis absorption spectroscopy, polarized optical microscopy (POM), and thermal gravimetric analysis (TGA). The TEM images showed the average primary size of the as-synthesized silver nanoparticles, coated with a monolayer of the surfactants consisting of oleic acid and an alkylamine, was about 5 nm with narrow distribution, and that they were uniformly dispersed in n-heptane. PHBV/silver nanocomposites were prepared by melt mixing in an internal mixer and then injection molded into rectangle-shaped specimens by a labscale injection molding device. The coated silver nanoparticles showed a homogenuous dispersion in the PHBV matrix when the content of coated silver nanoparticles was about 1%. Both the DSC and POM data showed the efficient heterogeneous nucleation by the coated silver nanoparticles for facilitating PHBV crystallization. The thermal stability of the PHBV/silver nanocomposites improved with the increase in the content of the coated silver nanoparticles.