Impact of Tea Processing on Tryptophan,Melatonin, Phenolic and Flavonoid Contents in Mulberry (Morus alba L.) Leaves: Quantitative Analysis by LC-MS/MS

Mulberry (Morus alba L.) leaves from two cultivars, Yai-Burirum (YB) and Khunphai (KP), were prepared into green tea (GT) and black tea (BT). Compared to fresh leaf (FL) extract, GT and BT extracts were evaluated for their total phenolic and total flavonoid contents. Total phenolic content (TPCs) in all samples ranged between 129.93 and 390.89 mg GAE/g extract. The processing of tea decreased the levels of TPC when compared to FL extracts in both cultivars. The total flavonoid content (TFCs) in all samples was found in the range of 10.15–39.09 mg QE/g extract and TFCs in GT and BT extracts were higher than FL extracts. The change in tryptophan, melatonin, phenolic and flavonoid contents was investigated by liquid chromatography–mass spectroscopy (LC-MS). The results exhibited that tryptophan contents in all samples were detected in the range 29.54–673.72 µg/g extract. Both GT and BT extracts increased tryptophan content compared to FL extracts. BT extracts presented the highest amounts of tryptophan among others in both cultivars. Phenolic compounds were found in mulberry leaf extracts, including gallic acid, caffeic acid, gentisic acid, protocatechuic acid and chlorogenic acid. Chlorogenic acid presented the highest amount in all samples. Almost all phenolic acids were increased in the processed tea extracts except chlorogenic acid. Rutin was the only flavonoid that was detected in all extracts in the range 109.48–1009.75 mg/g extract. The change in phenolic and flavonoid compounds during tea processing resulted in the change in antioxidant capacities of the GT and BT extracts. All extracts presented acetylcholinesterase enzyme (AChE) inhibitory activity with IC₅₀ in the range 146.53–165.24 µg/mL. The processing of tea slightly increased the AChE inhibitory effect of GT and BT extracts. In conclusion, processed tea from mulberry leaves could serve as a new alternative functional food for health-concerned consumers because it could be a promising source of tryptophan, phenolics and flavonoids. Moreover, the tea extracts also had antioxidative and anti-AChE activities.     

基于柯西分布的视频图像序列背景建模和运动目标检测

提出了一种用于视觉监视系统的基于柯西分布的发光模型的光照不变变化检测方法.假定视频图像序列中每个背景图像像素点灰度观测值的时序变化由白噪声引起,利用建立的初始化背景高斯统计模型对每帧图像进行归一化,得到了背景像灰度比值的分布符合标准柯西分布的结论,解决了柯西分布的模型参量估计问题.在变化检测的基础上,YCbCr颜色空间的亮度、色调和饱和度被用来识别和消除由阴影和反光等引起的变化区域.结果表明,提出的背景建模方法对场景中各种光线变化、小的背景扰动等噪声具有稳健性,可以较为可靠地检测前景目标,识别和去除阴影和反光.     

Effect of Different Processing Methods on the Chemical Constituents of Scrophulariae Radix as Revealed by 2D NMR-Based Metabolomics

Scrophulariae Radix (SR) is one of the oldest and most frequently used Chinese herbs for oriental medicine in China. Before clinical use, the SR should be processed using different methods after harvest, such as steaming, “sweating”, and traditional fire-drying. In order to investigate the difference in chemical constituents using different processing methods, the two-dimensional (2D) ¹H-¹³C heteronuclear single quantum correlation (¹H-¹³C HSQC)-based metabolomics approach was applied to extensively characterize the difference in the chemical components in the extracts of SR processed using different processing methods. In total, 20 compounds were identified as potential chemical markers that changed significantly with different steaming durations. Seven compounds can be used as potential chemical markers to differentiate processing by sweating, hot-air drying, and steaming for 4 h. These findings could elucidate the change of chemical constituents of the processed SR and provide a guide for the processing. In addition, our protocol may represent a general approach to characterizing chemical compounds of traditional Chinese medicine (TCM) and therefore might be considered as a promising approach to exploring the scientific basis of traditional processing of TCM.     

Water Status and Predictive Models of Moisture Content during Drying of Soybean Dregs Based on LF-NMR

To explore the drying characteristics of soybean dregs and a nondestructive moisture content test method, in this study, soybean dregs were dried with hot air (80 °C), the moisture content was measured using the drying method, water status was analyzed using low-field nuclear magnetic resonance (LF-NMR) and the moisture content prediction models were built and validated. The results revealed that the moisture contents of the soybean dregs were 0.57 and 0.01 g/g(w.b.), respectively, after drying for 5 and 7 h. The effective moisture diffusivity increased with the decrease in moisture content; it ranged from 5.27 × 10⁻⁹ to 6.96 × 10⁻⁸ m²·s⁻¹. Soybean dregs contained bound water (T₂₁), immobilized water (T₂₂) and free water (T₂₃ and T₂₃’). With the proceeding of drying, all of the relaxation peaks shifted left until a new peak (T₂₃’) appeared; then, the structure of soybean dregs changed, and the relaxation peaks reformed, and the peak shifted left again. The peak area may predict the moisture content of soybean dregs, and the gray values of images predict the moisture contents mainly composed of free water or immobilized water. The results may provide a reference for drying of soybean dregs and a new moisture detection method.     

X射线对CCD噪声影响的分析及滤波方法研究

通过实验分析了X射线对CCD的影响以及射线噪声的特点 ,并针对这种噪声的性质提出了菱形均值滤波器。经过计算机仿真滤波实验和实际应用 ,与递归与非递归中值滤波器作了对比 ,表明该滤波器不但能有效滤除脉冲噪声 ,而且能够较好地保持图像边缘和细节。     

超光滑加工的后置处理算法研究

为了精确控制超光滑加工过程中磨头的运动轨迹,从而实现光学元件材料去除的均匀稳定,研究了超光滑加工的后置处理算法。分析了超光滑加工工艺的特点和相应的超光滑机床的机械结构,建立了机床的坐标系统,构造了机床的运动学模型。对于光学元件母线为任意平面曲线的情况,研究了磨头运动轨迹的等误差直线逼近算法。在曲率半径为290mm,相对口径为1∶2.9的凹球面上进行了超光滑加工实验。结果表明,利用所述算法可以精确地控制磨头的运动轨迹,从而保证材料去除的稳定性。     

基于无约束非线性优化算法的光强自相关函数拟合

在光子相关光谱(PCS)颗粒测量技术中非线性累积反演方法是一种重要的算法。采用无约束非线性优化算法对反演过程中相关曲线的拟合问题进行了分析和研究, 实现了从任意初始值开始获取最优非线性拟合解, 并给出了算法的实现步骤。采用此方法对50 nm, 100 nm, 200 nm和500 nm的标准聚苯乙烯乳胶颗粒的实测光强自相关函数数据进行了拟合, 并反演了颗粒粒径, 与其他曲线拟合算法相比, 本算法不但对初始值的依赖性小, 而且得到的颗粒粒径更接近乳胶颗粒的标称直径, 测量误差更小。     

Automated data processing of [1H-decoupled] 13C MR spectra acquired from human brain in vivo

In clinical 13C infusion studies, broadband excitation of 200 ppm of the human brain yields 13C MR spectra with a time resolution of 2-5 min and generates up to 2000 metabolite peaks over 2h. We describe a fast, automated, observer-independent technique for processing [1H-decoupled] 13C spectra. Quantified 13C spectroscopic signals, before and after the administration of [1-13C]glucose and/or [1-13C]acetate in human subjects are determined. Stepwise improvements of data processing are illustrated by examples of normal and pathological results. Variation in analysis of individual 13C resonances ranged between 2 and 14%. Using this method it is possible to reliably identify subtle metabolic effects of brain disease including Alzheimer's disease and epilepsy.     

求解Euler方程的区域分解方法与并行算法

将复杂形状区域划分成多块子区域,研究发展了一种多块区域之间迎风守恒型的内边界耦合方法,实现相邻子区域解的光滑过渡,使多区耦合得到总体流场的数值解。对二维翼型跨音速流动和圆弧形隆起物超音速流动等进行了分区数值计算,并将计算结果与单区计算结果和实验结果作了比较。并行分区计算引入"先进先出"的同步控制等待机制,实现了高效率并行计算,还分析了影响并行效率的主要因素。     

High‐mobility solution‐processed zinc oxide thin films on silicon nitride

A high effective electron mobility of 33 cm² V^–1 s^–1 was achieved in solution‐processed undoped zinc oxide (ZnO) thin films. The introduction of silicon nitride (Si₃N₄) as growth substrate resulted in a mobility improvement by a factor of 2.5 with respect to the commonly used silicon oxide (SiO₂). The solution‐processed ZnO thin films grown on Si₃N₄, prepared by low‐pressure chemical vapor deposition, revealed bigger grain sizes, lower strain and better crystalline quality in comparison to the films grown on thermal SiO₂. These results show that the nucleation and growth mechanisms of solution‐processed films are substrate dependent and affect the final film structure accordingly. The substantial difference in electron mobilities suggests that, in addition to the grain morphology and crystalline structure effects, defect chemistry is a contributing factor that also depends on the particular substrate. In this respect, interface trap densities measured in high‐κ HfO₂/ZnO MOSCAPs were about ten times lower in those fabricated on Si₃N₄ substrates. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)