Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.     

一种新的判断高分子相容性的粘度判据

依据最近提出的高分子稀溶液粘度的浓度 依赖性的团簇理论 ,对高分子‘理想混合物’的定义进行了更新的理论分析 .在此基础上提出了一个新的判定高分子相容性的粘度判据 .从现有的大量实验数据看 ,该判据是和事实相符合的     

Fraktionierte Kristallisation von Ammonium- und Magnesiumdoppelnitraten der Ceriterden; Bestimmung der Trennfaktoren und Vergleich der Trennwirkung

Summary The Separation Factors for Pr/La, Nd/Pr, and Sm/Nd, characterizing the crystallization of ammonium and magnesium double nitrates under practical conditions, were determined analytically and are discussed. They confirm that La and Pr can be separated better by fractional crystallization of ammonium double nitrates, whereas in the presence of Sm the magnesium double nitrates are preferable.

     

Effect of multi-walled carbon nanotubes on non-isothermal crystallization kinetics of polyamide 6

The non-isothermal crystallization behaviors of multi-walled carbon nanotubes (MWNTs)/polyamide 6 (PA6) composites were investigated by differential scanning calorimetry (DSC). Three methods, namely, Avrami, Ozawa and Mo, were carried out to analyze the non-isothermal crystallization data. The results showed that the MWNTs in PA6 acted as effective nucleation agents. However the crystallization rate of composites obtained was lower than that of the neat PA6. It is indicated that the presence of MWNTs influenced the mechanism of nucleation and the growth of PA6 crystallites.     

Amorphous phase evolution during crystallization of poly(ethylene-terephthalate)

Crystallization of poly(ethylene terephthalate) from the amorphous state has been studied in the temperature range 90°–120°C to characterize the amorphous phase when crystalline microstructure is developing. Small-angle x-ray scattering, scanning electron microscopy, and density measurements were used to investigate the morphology of semi-crystalline materials. Differential scanning calorimetry and dynamical mechanical spectroscopy experiments were carried out on amorphous, partially crystallized and crystallized specimens and, when structural relaxation is allowed (thermal treatments close to but below glass transition temperature), strong evidence is obtained for the existence of two different amorphous phases with different mobilities.     

载体γ-Al2O3和钐对非晶态NiB合金热稳定性的影响

用化学还原法制备了NiB、NiB/Al2O3和NiBSm/Al2O3三种催化剂，它们都呈非晶结构.用等离子耦合发射光谱仪(ICP)对催化剂组分进行了分析，采用差示扫描量热法（DSC）对三种催化剂进行了热稳定性分析.结果表明，载体的引入使非晶态NiB合金的体相组成中B的含量降低.将非晶态NiB合金负载到γ-Al2O3上,可以明显改善非晶态合金的热稳定性，少量Sm可以进一步提高晶化温度.晶化激活能数据亦表明了载体和Sm对非晶结构具有良好的稳定作用.载体和Sm可能通过不同的作用提高了非晶态合金的热稳定性.     

1,2-丁二醇共聚对聚对苯二甲酸乙二醇酯结晶行为及力学性能的影响

为了探索生物基乙二醇中的1,2-丁二醇(1,2-BDO)作为共聚单体对生物基聚对苯二甲酸乙二醇酯(PET)的结晶行为和力学性能的影响。 本文合成了生物基PET均聚物和不同1,2-BDO共聚单元摩尔分数的系列生物基PET共聚物(共聚单体摩尔分数分别为2.0%、2.7%和5.6%),并采用傅里叶变换红外光谱仪(FTIR)、差示扫描量热仪(DSC)和力学测试等技术手段研究了其结晶行为和力学性能。 结果表明,随着1,2-BDO共聚单元摩尔分数的增加,PET共聚物的熔融温度、结晶速率及结晶度均明显降低,表明1,2-BDO共聚单体的引入破坏了PET分子链的规整性,阻碍了PET链段的结晶。 PET材料的拉伸强度随着1,2-BDO共聚单元摩尔分数的增加而降低,而弯曲强度和弯曲模量略有升高。     

超临界NaCl水溶液的分子动力学模拟

采用分子动力学模拟的方法对超临界NaCl水溶液的微观结构进行了研究.模拟发现在所研究超临界条件下,密度的变化比温度的变化对超临界NaCl水溶液的微观结构影响更大.温度及密度对Cl－ H2O径向分布函数的影响比对Na＋ H2O径向分布函数的影响要大.超临界条件下,各gNa＋－Cl－在0.261 nm处出现峰值,表明Na＋、Cl－之间发生了离子的缔合.超临界条件下,随温度增加,缔合作用增强；随密度增加,缔合作用减弱.本文工作为建立可适用于超临界条件下的电解质热力学模型提供了依据.     

Texture of zirconia obtained by forced hydrolysis of ZrOCl2 solutions

The structure and surface properties of ZrO₂ strongly depend on its preparation. In the present work the impact of prolonged aging at basic conditions (pH = 9, T = 100°C, t = 48 h), on the phase composition and textural properties, obtained by calcination of the precipitate, was investigated using several techniques conjointly (DTA/TG, DSC, XRD, porosimetry). The thermal effects accompanying the ZrO₂·xH₂O gel formation, the coalescence of the particles and crystallization were evaluated and discussed in terms of the structural differences between the aged and non-aged samples. This revised version was published online in July 2006 with corrections to the Cover Date.     

The non-isothermal devitrification of lithium germanate glasses

The non-isothermal devitrification of lithium germanate glasses, examined by DTA and XRD, is reported and discussed. The glass compositions are expressed by the general formula:xLi₂O(1?x)GeO₂ withx=0.050, 0.125, 0.167, 0.200 and 0.250. All the glasses studied, unlike GeO₂ glass, exhibit internal crystal nucleation without the addition of any nucleating agent. The devitrification processes occur in one or more steps. Phases which crystallized at each step are identified and crystallization mechanisms proposed. These crystallization mechanisms are related to structures of the crystallizing phases. Activation energy values as well as those for glass transition temperatures, do not vary linearly with increase in Li₂O content but pass through a maximum atx=0.200.