A study of threshold switching of NbO2 using atom probe tomography and transmission electron microscopy

Threshold switching is a phenomenon where the resistivity of an insulating material changes and the insulator exhibits metallic behavior. This could be explained by phase transformation in oxide materials; however, this behavior is also seen in amorphous insulators. In this study, through an ex-situ experiment using transmission electron microscopy (TEM), we proved that threshold switching of amorphous NbO₂ accompanies local crystallization. The change in I–V characteristics after electroforming was examined by evaluating the concentration profile. Atom probe tomography (APT) combined with in-situ TEM probing technique was performed to understand the threshold switching in amorphous NbO₂. The local crystallization in amorphous NbO₂ was validated by the observed difference in time-of-flight (ToF) between amorphous and crystalline NbO₂. We concluded that the slower ToF of amorphous NbO₂ (a-NbO₂) compared with crystalline NbO₂ (c-NbO₂) is due to the resistivity difference and trap-assisted recombination.     

In situ X‐ray data collection and structure phasing of protein crystals at Structural Biology Center 19‐ID

A prototype of a 96‐well plate scanner for in situ data collection has been developed at the Structural Biology Center (SBC) beamline 19‐ID, located at the Advanced Photon Source, USA. The applicability of this instrument for protein crystal diffraction screening and data collection at ambient temperature has been demonstrated. Several different protein crystals, including selenium‐labeled, were used for data collection and successful SAD phasing. Without the common procedure of crystal handling and subsequent cryo‐cooling for data collection at T = 100 K, crystals in a crystallization buffer show remarkably low mosaicity (<0.1°) until deterioration by radiation damage occurs. Data presented here show that cryo‐cooling can cause some unexpected structural changes. Based on the results of this study, the integration of the plate scanner into the 19‐ID end‐station with automated controls is being prepared. With improvement of hardware and software, in situ data collection will become available for the SBC user program including remote access.     

Synthesis,crystal growth,structural, spectral,optical, thermal and dielectric studies of a new nonlinear optical material: 4-Hydroxy-l-proline-l-tartaric acid (1:1)

Single crystals of a new organic material, 4-hydroxy-l-proline-l-tartaric acid (HPTA) adduct, were grown by slow evaporation of an aqueous solution containing equimolar concentrations of 4-hydroxy-l-proline and l-tartaric acid at room temperature. Formation of new crystal has been confirmed by single crystal X-ray diffraction and NMR spectroscopic techniques. The single crystal XRD analysis shows that a molecule of 4-hydroxy-l-proline and a molecule of free l-tartaric acid both of which are interlinked to each other by two types of H-bonding interactions, namely O(6)–H(6)⋯O(2) and N(1)–H(1B)⋯O(10). The title compound (HPTA) crystallizes in monoclinic crystal system with non-centrosymmetric space group P2₁. The suitability of the crystal for optical applications was studied by UV–Vis–NIR spectroscopy. Fourier transform infrared (FT-IR) spectral analysis was used to confirm the presence of various functional groups in the grown crystals. The thermal stability of the compound was investigated by thermogravimetric and differential thermal analyses. The dielectric constant and dielectric loss of the crystal were studied as a function of frequency and temperature. The fluorescence spectral analysis of the title crystal shows an indigo emission. The second order nonlinear optical (NLO) property of the crystal was confirmed by the modified Kurtz–Perry powder second harmonic generation (SHG) test.     

Interaction in the molten system Rb2O‐P2O5‐TiO2‐NiO. Crystal structure of the langbeinite‐related Rb2Ni0.5Ti1.5(PO4)3

The interaction in the molten system Rb₂O‐P₂O₅‐TiO₂‐NiO was investigated at different molar ratios Rb/P = 0.5‐1.3, fixed Ti/P = 0.15, Ti/Ni = 1.0 at temperature range 1073–953 K. The conditions of formation of complex phosphates RbTi₂(PO₄)₃, Rb₂Ni_0.5Ti_1.5(PO₄)₃ and RbNiPO₄ have been determined. The new phosphate Rb₂Ni_0.5Ti_1.5(PO₄)₃ (space group P2₁3, a = 9.9386(2) Å) has been obtained and investigated by the single crystal X‐ray diffraction and FTIR‐spectroscopy. It has langbeinite‐like structure, that is built up from mixed (Ni/Ti)O₆‐octahedra and РО₄‐tetrahedra. Rubidium atoms are located in closed cavities of 3D‐framework.     

Cooling crystallization of aluminum sulfate in pure water modulated by sodium dodecylbenzenesulfonate

This study investigated the cooling crystallization of aluminum sulfate to explore the basic data for the recovery of aluminum resources from coal spoil. Cooling crystallization process of aluminum sulfate with sodium dodecylbenzenesulfonate (SDBS) was investigated experimentally. The effects of operating conditions, namely rotate speed and cooling rate on the crystal size (Median diameter, D_0.5) were studied. Based on single factor experimental results, the response surface method (RSM) with a Box–Behnken design (BBD) was used to determine the key operating conditions, from which a predictive equation was established to quantitatively describe the relationships of D_0.5 and there relative parameters. The optimum operating conditions for cooling crystallization of aluminum sulfate were as follows: rotate speed of 200–300 rpm, cooling rate of 4–5 °C /min and n (SDBS)/n (Al₂(SO₄)₃) of around 5E‐4. Molecular dynamics (MD) results reveal that SDBS decreases the diffusion coefficient (D) of Al³⁺ molecules, which inhibits nucleation and promotes crystal growth.     

Solution Blowing of Poly（dimethylsiloxane）/Nylon 6 Nanofiber Mats for Protective Applications

A new strategy was developed to fabricate superhydrophobic nylon 6 nanofibers, in which the blend solutions of poly(dimethylsiloxane)(PDMS) prepolymer and nylon 6 was spun using an innovative solution blowing process, and then the PDMS prepolymer contianning nanofibers were cured to obtain PDMS/nylon 6 nanofiber mats. Morphology, surface composition, non-wetting property and protective performance were investigated. The results showed that the addition of PDMS prepolymer improved the spinnability of the spinning solutions, and the PDMS/nylon 6 nanofibers had smooth surfaces and diameters from 100 nm to 350 nm. The presence of PDMS effectively enhanced the hydrophobicity of the nanofiber mats, showing water contact angles of 132° to 161° for PDMS contents of 1 wt% to 3 wt%. The PDMS/nylon 6 mats also possessed excellent protective and transport properties. The results indicated the potential application of the novel nanofiber mats in protective clothing.     

Accelerating Crystallization of Open Organic Materials by Poly(ionic liquid)s

The capability to significantly shorten the synthetic period of a broad spectrum of open organic materials presents an enticing prospect for materials processing and applications. Herein we discovered 1,2,4-triazolium poly(ionic liquid)s (PILs) could serve as a universal additive to accelerate by at least one order of magnitude the growth rate of representative imine-linked crystalline open organics, including organic cages, covalent organic frameworks (COFs), and macrocycles. This phenomenon results from the active C5-protons in poly(1,2,4-triazolium)s that catalyze the formation of imine bonds, and the simultaneous salting-out effect (induced precipitation by decreasing solubility) that PILs exert on these crystallizing species.     

Expanding the Synthesis Field of High-Silica Zeolites

Aluminosilicate zeolites are synthesized under hydrothermal conditions in a basic/alkaline medium in the pH range between 9 and 14. The synthesis of MFI-type zeolite in an acidic medium is presented. The critical parameter determining the zeolite formation in an acidic medium was found to be the isoelectric point (IEP) of gel particles. MFI-type zeolite was synthesized above the isoelectric point of the employed silica source, where the silica species exhibit a negative charge and the paradigm of zeolite formation based on the electrostatic interaction with the positively charged template is retained. No zeolite formation is observed below the isoelectric point of silica. The impact of aluminum on the zeolite formation is also studied. The results of this study will serve to extend the synthesis field of high silica zeolites to the acidic medium and thus open new opportunities to control the zeolite properties.     

Morphology optimization of solution blow spun polystyrene to obtain superhydrophobic materials with high ability of oil absorption

In this study, Polystyrene based materials, PS, with tailored morphologies are prepared by solution blow spinning, SBS. It is demonstrated that this tailored morphology of PS can be designed through the choice of particular SBS processing conditions. Several SBS processing conditions, including solution concentration, gas pressure and solution feeding rate are changed to consider their individual and combined effects on the final polymer morphology. The morphology of the PS samples is inspected by scanning electron microscopy, SEM. This morphology is analyzed in terms of fiber diameter and relative amount of fibers respect to other morphological features such as lumps or fibers aggregates. Coupling the experimental analysis with the use of Box-Behnken method and the desirability function, particular values of parameters controlling the SBS processing conditions are able to be obtained in order to achieve certain morphologies of PS, in particular, maximum amount of fibers with the minimum diameter. Influence of PS morphology on hydrophobicity and the ability of oil absorption is studied by contact angle measurements. The use of Box-Behnken design together with the desirability function is revealed as a reliable and accurate method for designing polystyrene materials through the optimal election of SBS processing conditions for the production of the polymer with particular morphologies and therefore, with especial performance regarding adsorption and absorption of liquid wastes. SBS PS constituted by the maximum amount of fibers with the shortest diameters lead to superhydrophobic materials with the highest ability of oil absorption for the PS.     

Absolute Configuration of Small Molecules by Co‐Crystallization

The most reliable method to determine the absolute configuration of chiral molecules is X‐ray crystallography, but small molecules can be difficult to crystallize. We report rapid co‐crystallization of tetraaryladamantanes with small molecules as different as n‐decane to nicotine to produce crystals for X‐ray analysis and the assignment of absolute configuration when the molecules are chiral. A screen of 52 diverse compounds gave inclusion in co‐crystals for 88 % of all cases and a high‐resolution structure in 77 % of cases. Furthermore, starting from three milligrams of analyte, a combination of NMR spectroscopy and X‐ray crystallography produced a full structure in less than three days using an adamantane crystallization chaperone that encapsulates the analyte at room temperature.