Preconcentration of copper with multi-walled carbon nanotubes pretreated by potassium permanganate cartridge for solid phase extraction prior to flame atomic absorption spectrometry

A procedure for the preconcentration of copper was described in this paper using multi-walled carbon nanotubes (MWCNTs) oxidized by potassium permanganate as the adsorbent for the enrichment of trace copper in water samples. Important parameters, such as the sample pH, the concentration and volume of eluent, sample flow rate and volume, and interference of coexisting ions, were investigated. The obtained results indicated that proposed method possessed an excellent analytical performance. The linear range, the detection limit, and precison (RSD) were 1-100 ng/mL (R2 = 0.9993), 0.32 ng/mL and 2.88%, respectively. The results showed that copper could be adsorbed quantitatively on the pretreated MWCNTs with potassium permanganate, and proposed method was very useful in the monitoring of copper in the environment.     

固体表面化学发光分析 Ⅰ.不渗透阻挡技术的应用和研究

本文应用不渗透阻挡技术在固体基质上保持恒定的化学发光区域，实现了固体表面化学发光分析，并对固体表面化学发光特性，发光的均匀性和重视性，固体基质的选择和纯化等方面进行了研究，测定了１３种无机及生物活性物质固体表面化学发光的线性范围及检测限。由于此法克服了固体基质荧光分析和固体表面室温磷光分析的散射光背景的影响，获得了更高的信噪比和更好的检测限。     

Affinity adsorption of recombinant human interferon-α on a porous dye-affinity adsorbent

Interferons are potent biologically active proteins synthesized and secreted by somatic cells of all mammalian species. Dye-affinity adsorption is increasingly used for protein separation. Hollow fibers have several advantages as adsorbents in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow fibers to which Cibacron Blue F3GA was attached for adsorption of recombinant interferon-α (rHuIFN-α). The hollow fiber was characterized by scanning electron microscopy. These dye-carrying hollow fibers (35.8 μmol/g) were used in the rHuIFN-α adsorption-elution studies. The effects of initial concentration of rHuIFN-α, medium pH, ionic strength and temperature on the adsorption efficiency of dye-attached hollow fibers were studied in a batch system. The non-specific adsorption of rHuIFN-α on the hollow fibers was 1.2 mg/g. Cibacron Blue F3GA attachment significantly increased the rHuIFN-α adsorption up to 99.8 mg/g. Significant amount of the adsorbed rHuIFN-α (up to 94.8%) was eluted in 1 h in the elution medium containing 1.0 M NaCl. In order to determine the effects of adsorption conditions on possible conformational changes of rHuIFN-α structure, fluorescence spectrophotometry was employed. We resulted that dye-affinity hollow fibers can be applied for rHuIFN-α adsorption without causing any significant conformational changes. Repeated adsorption/elution processes showed that these dye-attached hollow fibers are suitable for rHuIFN-α adsorption.     

Ternary and tetrahedral symmetry in hybrid fluorides, fluoride carbonates and carbonates

Tren amine cations and carbonate anions adopt a ternary symmetry while tetra amine cations are tetrahedral. The symmetry of these constitutive ions influences strongly the nature of the solids which crystallise from solutions. Large fluorinated aluminate polyanions with tetrahedral symmetry appear in the presence of tren amine, while infinite chains of AlF₆ octahedra are observed with tetra amine and that noncentrosymmetric structures are frequently encountered in rare earth fluoride carbonates.     

Synthesis of porous vinylnaphthalene/divinylnaphthalene copolymers and their sorptive properties towards phenol and its derivatives

Four porous vinylnaphthalene/divinylnaphthalene (VN/DVN) polymers having three different nominal crosslinking degrees (60, 80 and 100 wt.%) have been synthesized using the suspension polymerization method in the presence of toluene and decane.The use of various crosslinking levels and inert diluents was aimed at changing the extent of polymeric network-diluent interactions. The resultant polymers have specific surface area in the range 450-700 m²/g depending on the DVN content. Two sets of pores were detected in all resins: one with the diameter of ≈2 nm and the second one in the range of 30-40 nm. Their sorptive properties have been studied using dilute (0.5 mmol/l) solutions of phenol and its derivatives (o-chlorophenol, 2-methylphenol, o-nitrophenol, m-nitrophenol and p-nitrophenol). It has been found that sorption, at low equilibrium concentration, follows the order: o-nitrophenol > o-chlorophenol > m-nitrophenol > o-methylphenol > p-nitrophenol > phenol. Full characteristics of the porous structure of resultant polymers was obtained by nitrogen adsorption at 77 K and their surface properties analyzed using Inverse Gas Chromatography.     

覆氧或氧离子轰击下固体表面二次正离子发射的研究

通过对离子轰击下固体表面电离过程重新考虑认为，在固体表面覆氧或氧离子轰击下除表面原子的直接电离外，激发态双原子间电子交换和断键亦起重要作用。在此基础上修正了局部热力学平衡模型，得到了一个包含各类离子内配分函数、电离能、金属－氧原子键断键能以及表面金属原子与氧原子结合份数等参数决定的新电离几率分析表达式。应用该分析表达式解释了金属表面覆氧、氧离子轰击金属、化合物半导体表面二次离子发射中氧增强效应、充氧量对二次离子发射的影响及其基体效应等实验现象。并由此得到了元素相对灵敏度因子的分析表达式，对化合物半导体及一些陶瓷材料表面二次离子质谱分析中元素灵敏度因子随元素电离能变化曲线给予了相应的物理解释。     

Direct determination of manganese in vitamin-mineral tablets using solid sampling electrothermal atomic absorption spectrometry

Manganese in vitamin-minerals tablets was determined by solid sampling electrothermal atomic absorption spectrometry (SS-ETAAS) using three different calibration methods, namely calibration against aqueous standards, standard addition with aqueous standards on solid samples and calibration against solid certified standards. Samples were only finely ground and introduced directly into the furnace by means of solid autosampler system without any dissolving process. Effects of different calibration techniques, temperatures and heating rates of atomization and pyrolysis steps on the accuracy and precision of the analyte elements were investigated. After optimization of the experimental parameters, there is good agreement (at 95% confidence level) between the results obtained by solid sampling and those obtained by acid digestion of samples.     

Optimisation and validation of an automated solid phase extraction technique coupled on-line to enzyme-based biosensor detection for the determination of phenolic compounds in surface water samples

Summary A fully integrated screening system for phenolic compounds was developed incorporating on-line solid phase extraction, fractionation and biosensor detection. Two different types of biosensors, solid graphite and carbon paste electrodes incorporating the enzyme tyrosinase, were compared and used in the screening system. Interfacing of the solid phase extraction and fractionation with the biosensor detection was given special attention since the biosensors were not compatible with the organic modifier used for desorption of phenols from the solid phase extraction step. The system was validated with conventional analytical techniques. Surface water samples from the Ebro river were spiked with 1,10, and 25g L^–1 of catechol, phenol,p-cresol, respectively. Three out of seven samples were spiked and the correct samples were identified, containing phenols equivalent to the spiked concentrations.     

Fourier transform IR spectrum and photoreactivity of the C3O2:HCl complex isolated in solid argon

IR spectroscopy was coupled with the matrix isolation technique to study the molecular complex formed between C₃O₂ and HCl and its photodissociation. The vibrational frequencies of the complex were compared with those of HCl and C₃O₂ monomers. For C₃O₂, a bent structure was characterized in the solid environment.

The vibrational frequencies were calculated in the 4000–400 cm⁻¹ range using an ab initio method at the MP2/6-31G** level for the most stable complex; these frequencies describe the hydrogen interaction with the central carbon atom of C₃O₂ (T complex). The measured shifts between the vibrational mode frequencies of the complex and monomers were in good agreement with the calculated values.

Broad-band UV irradiation ( > 230 nm) of the T complex leads preferentially to ketene chloride and carbon monoxide. Ketene chloride formation can be explained by the reaction between HCl and the carbene C₂O, which results from photo-dissociation at the C=CO bond of C₃O₂.     

Chemical analysis of microcystins RR and LR in cyanobacterium using a prepacked cyano cartridge

Summary A new method for the determination of microcystins PR and LR in cyanobacterium was developed using cyano-type prepacked cartridges. The microcystins were extracted with 10% acetic acid and the extract applied to a Baker 10 cyano cartridge. After elution from the cartridge with 0.5M acetic acid-acetonitrile (19) the microcystins were determined by HPLC. Better recoveries and chromatograms were observed than with ODS cartridges.