Mixed crystals in the system Cu2MnGexSn1−xS4: Phase analytical investigations and inspection of tetrahedra volumes

Cu₂MnGeS₄ crystallizes orthorhombic in a wurtzite superstructure type while Cu₂MnSnS₄ crystallizes in a tetragonal sphalerite superstructure type. Lattice constants and thermal analyses of the solid solution series Cu₂MnGe_xSn_1−xS₄ are presented. A two-phase region is found from Cu₂MnGe_0.3Sn_0.7S₄ to Cu₂MnGe_0.5Sn_0.5S₄. The cell volume of the mixed crystals increases with increasing Sn content. The melting points increase smoothly with increasing Ge content to x=0.5 and then steeply for higher Ge contents. The single crystal X-ray structure analysis of Cu₂MnGe_0.55Sn_0.45S₄ is presented. The refinement converges to R=0.0270 and wR₂=0.0586, Z is 2. The volumes of the tetrahedra [MS₄] (M=Cu, Mn, Ge, Sn) are calculated. From these volumes the differences in size of the tetrahedra are derived and compared with the corresponding differences in the end members of the solid solution series. It turns out that the resulting structure type in these materials depends on the volume differences of the constituting tetrahedra [MS₄].     

Methanol electrooxidation on platinum mesh electrodes bonded to solid polymer electrolytes

Methanol electrooxidation on smooth platinum electrodes bonded to solid polymer electrolytes was studied in water and acid solution by voltammetric measurements with different scanning rates. An enhancement of the oxidation rates was observed in these systems as compared to identical platinum electrodes in contact with liquid electrolytes. This electrocatalytic effect strongly depends on the measuring conditions and on the electrode potential. The reasons for the catalytic effects at different potentials are discussed. Received: 8 January 1997 / Accepted: 1 December 1997     

Chiroptical detection during liquid chromatography,part 5: On-line measurement of circular dichroism spectra Δε(λ) during stops of chromatographic flow

Summary A procedure is described which serves to measure circular dichrograms () on line during stops of flow in liquid chromatography. Since the concentration of substrate in the spectrometer cell during the stop is not known, the differential absorption coefficients are calculated from the experimental differential absorbances A by means of UV absorption (i. e. photomultiplier voltage) data. Verifications of the procedure are obtained by its application to three substrates (Table 1), the () spectra of which were known. The present on-line technique is compared with a corresponding off-line method.The N,N-dimethylthiobenzamides1 and2 as well as the 9,10-phenanthrenequinone7 consist of interconvertible enantiomers because their planar states are destabilized by steric overcrowding of groups. The unknown dichrograms () of1, 2 and7 are obtained (Figs. 2 and 4) and discussed with reference to the helicities of these molecules.In memory of the late Professor Dr. Dr. h. c. Günther Snatzke.     

Polysulfonylamine. CLX [1] Kristallstrukturen von Metall‐di(methansulfonyl)amiden. 10 [2] Die dreidimensionalen Koordinationspolymere M[(CH3SO2)2N] mit M = Kalium,Rubidium, Caesium (isotype Strukturen für M = K,Rb)

Polysulfonylamines. CLX. Crystal Structures of Metal Di(methanesulfonyl)amides. 10. The Three‐Dimensional Coordination Polymers M[(CH₃SO₂)₂N], where M is Potassium, Rubidium, Cesium (Isotypic Structures for M = K, Rb) Low‐temperature X‐ray crystal structures are reported for KA (monoclinic, space group P2₁/c, Z′ = 1), RbA (isotypic and isostructural with KA), and CsA (monoclinic, P2₁/n, Z′ = 1), where A^— denotes the anion obtained by deprotonation of the strong nitrogen acid (MeSO₂)₂NH. In KA and RbA, the anion is distorted into a rare C₁ conformation, whereas the standard C₂ conformation is retained in the cesium complex. The structures consist of three‐dimensional coordination networks, in which each cation adopts an irregular (O₆N)‐heptacoordination by forming close contacts to one (O, N)‐chelating, one (O, O)‐chelating and three κ¹O‐bonding ligands; however, the coordination number for Cs⁺ is effectively increased to 8 by a very short Cs···Cs contact distance of 422.5 pm. The crystal packings of the isotypic compounds KA and RbA display lamellar layer substructures that involve six independent ligand‐metal bonds and comprise an internal cation lamella and peripheral regions built up from anion monolayers; the 3D framework is completed by one independent M—O bond cross‐linking the layer substructures. In contrast, CsA features anion monolayers that intercalate planar zigzag chains of cations (Cs···Cs alternatingly 422.5 and 487.5 pm, Cs···Cs···Cs 135.7°), whereby each chain is surrounded and coordinated by four anion stacks and each anion stack connects two cation chains. All structures exhibit close C—H···A interanion contacts consistent with weak hydrogen bonding.     

Zr（Ⅳ）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应．实验中制备了两类具有强酸催化活性的ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％．     

压力、温度和晶粒尺寸对Fe-N合金的合成及结构的影响

在 1× 1 0 - 3 Pa～ 4 GPa的压力和 5 80～ 930 K温度范围内 ,利用高压技术并结合机械球磨 ,研究了压力、温度和晶粒尺寸对α-Fe与非晶 BN的固态反应的影响 .发现高压和晶粒细化可以极大地促进α-Fe和非晶 BN的固态反应过程 ,α-Fe与非晶 BN发生固态反应的临界晶粒尺寸约 8nm.压力和温度对反应产物及其晶体结构有明显影响 .2 GPa和 80 0 K时 ,反应产物为具有正交结构的 Fe-N新相 ;在 3～ 4 GPa和 690～80 0 K时 ,可形成单一ε-Fex N合金相 ;而在 4 GPa和 930 K以上 ,反应产物由 Fe-N合金相转变为 Fe3B相     

Sm, Pr掺杂CeO2和CeMoO15基固体电解质的结构与性能

采用溶胶凝胶法制备了Sm和Pr掺杂的CeO2和CeMoO15基固体电解质, 通过X射线衍射(XRD)、拉曼光谱(Raman)、场发射扫描电镜(FE-SEM)等手段对氧化物结构进行了分析, 用交流阻抗谱测试了其电性能, 并比较了不同基体及其掺杂体系的结构与电性能. 结果表明, Ce6MoO15基掺杂体系的导电性能高于CeO2基掺杂体系; 元素Mo的加入使Ce6MoO15基材料的晶粒尺寸增大, 晶界相成分减少, 材料的晶界电导率增加, 600 ℃以下材料导电性能明显提高; Pr的掺入减小了材料的晶粒尺寸, 提高了材料的晶界电导率.     

Polystyrene-supported Benzyl Selenide: An Efficient Reagent for Highly Stereocontrolled Synthesis of Substituted Olefins

Solid-phase methodology has been rapidly and extensively applied to the preparation of small organic molecules recently1. It might be argued that selenoxide syn-elimination provided the principal impetus for the development of organoselenium chemistry. In addition, the required selenoxides are readily available from the oxidation of the corresponding selenides, which in turn can be prepared by the reaction of selenium-stabilized carbanions with various electrophilic substrates2. However, or…     

Study of Sb‐doped SnO2 Gray Ceramic Pigment with Cassiterite Structure

In this study, Sb_xSn_1?xO₂ (0 ≤ x ≤ 0.5) compositions were synthesized by the ceramic method from Sb₂O₃‐SnO₂ and Sb₂O₅‐SnO₂ mixtures and characterized by Differential thermal analysis (DTA) and thermogravimetric analysis (TG), X‐ray diffraction, UV‐V‐NIR spectroscopy and CIE L*a*b* (Commission Internationale de l'Eclairage L*a*b*) parameters measurements. Solid solutions with cassiterite structure were obtained at 1300 °C. These solid solutions are stable into glazes. From Sb₂O₃, light gray coloured materials were obtained. From Sb₂O₅, bluish gray coloured materials were obtained at 1300 °C/6h when x ≥ 0.3. Sb_xSn_1?xO₂ with 0.3 ≤ x < 0.5, T = 1300 °C and Sb₂O₅ might be established as compositional range, fired temperature and antimony precursor to obtain gray ceramic pigments in this system.     

Selectivity optimization for the capillary gas chromatographic analysis of bacterial cellular fatty acids

Summary The importance of selectivity in the capillary gas chromatographic analysis of the cellular fatty acids of micro-organisms is underestimated. The analysis on apolar silicone phases can lead to erratic elucidation of the fatty acid structure. Qualitative errors have been detected in commercially available standards on which computer matching identification techniques are based. Using highly polar capillary columns of the cyanopropyl silicone type, the errors could be elucidated. The exact identification of the hydrolysis products of bacteria is a must for chemotaxonomic studies applying chromatographic techniques. The fatty acid methyl ester profiles can also contain other chemical components which are very important taxonomic markers. Fatty aldehydes, for example, are main components in someClostridium species. Fractionation techniques are described for selective enrichment of fatty aldehydes and hydroxy fatty acids.Dedicated to Prof. Dr. A Liberti on the occasion of his 70th birthday