SOLID STATE CHEMISTRY OF La_(1-x)Li_(x)MnO_3 AND RELATED COMPOUND

A series of perovskite type oxides La_(1-x)A_(x)MnO_3(x=0.1 for A=Li,Na,K;x=0.1～0.5 for A=Li)have been prepared by impregnation.Experimental results showed that the substitution of La~(3 ) by Li~ inLaMnO_(3 ?) greatly increased the selectivity to ethane and ethylene for theoxidative coupling of methane.Temperature-programmed desorption of oxygenproved the presence of oxygen vacancies in the oxide lattice.The higher Mn~(4 )/Mn_t ratio in oxide made the formation of oxygen vacancies easier on the oxidesurface.The general formula of the oxides is La_(1-x)Li_(x)Mn＇V＇_(y)O_(3-y),V=vacancy.     

Polyalkoxybenzenes from plant sources 2. Synthesis of isoxazoline analogs of combretastatin from natural allyl(methylenedioxy)methoxybenzenes

A series of analogs of the natural mitostatic agent combretastatin were synthesized by the reaction of nitrile oxides with natural allylbenzenes, such as myristicin, apiol, and dillapiol. The 1,3-dipolar cycloaddition reactions in allylic systems proceed regiospecifically. The reactions with trans isomers of propenylbenzenes, viz., isomyristicin, isoapiol, and isodillapiol, as dipolarophiles produce regioisomers. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2375–2380, December, 2007.     

Sol-gel-derived prussian blue-silicate amperometric glucose biosensor

A new type of inorganic biosensor is introduced. The sensor comprises glucose oxidase enzymes encapsulated in a sol-gel-derived Prussian blue-silicate hybrid network. Glucose is detected by the biocatalytic reduction of oxygen followed by catalytic reduction of hydrogen peroxide by the Prusian blue catalyst. The sol-gel silicate entails a rigid encapsulating matrix, the Prussian blue provides chemical catalysis and charge mediation from the reduction site to the supporting electrode, and the enzyme is responsible for the biocatalysis. The feasibility of a dual optical/electrochemical mode of analysis is also demonstrated.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.     

Effect of enzyme concentration on the dynamic behavior of a membrane-bound enzyme system

The dynamic behavior of the reaction-diffusion system, composed of glucose oxidase (EC 1.1.3.4) immobilized at a uniform concentration in a membrane, used as a glucose electrode is represented by a diffusion equation with a nonlinear reaction-term in one-dimensional space. The mathematical model is analyzed by computer simulation, that is, numerical integration of the equation under various initial and boundary conditions, to examine the effect of enzyme concentration on the response characteristics (responsiveness and linearity in response) of the electrode. The analysis of the responses of the system to stepwise changes in the boundary value (glucose concentration in simple solution) infers that the enzyme concentration governs the patterns of the spatial distributions of the substrates (glucose and dissolved oxygen) in steady states and transient responses. It is also revealed that the response characteristics of the electrode are optimized with concentration of immobilized enzyme and that the system establishes the steady states at the same spatial distributions of the substrates, regardless of the boundary value. The diffusion of the substrates and the oxygen concentration also have significant effects on the response characteristics of the electrode.     

Ni(phen)(H2O)(V2O6)的水热合成和晶体结构（英）

A novel compound Ni(phen)(H₂O)(V₂O₆) has been hydrothermally synthesized and structurally determined to be a two-dimensional compound, which contains {V₂O₆}_n^2n- chains interconnected by nickel(Ⅱ) complexes via oxygen atoms. The crystallographic data measured by single-crystal X-ray diffraction analysis are as follows: C₁₂H₁₀N₂NiO₇V₂, M_r=454.81, monoclinic, space group P2₁/c, a=0.784 6(3), b=2.103 6(8), c=0.942 3(4) nm, β=112.872(5)°, V=1.433 0(10) nm³, Z=4, D_c=2.104 Mg·m^-3, μ(Mo Kα)=2.615 mm^-1, F(000)=904, T=298(2) K, 4 480 reflections collected, 2 470 independent (R_int=0.032 2), the final R=0.058 4 and wR₂=0.145 7 for 2 303 observed reflections with I>2σ(I). CCDC: 192520.     

Polyacrylate/silica nanocomposite materials prepared by sol-gel process

Polyacrylate/silica nanocomposite was prepared by sol-gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), γ-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanocomposite was investigated in details. Dynamics Laser Scattering (DLS) indicated that the average diameter of the polyacrylate/silica latex particles (177 nm) was bigger than that of the pure polyacrylate latex particles (105.3 nm), but the ζ potential of polyacrylate/silica was decreased respectively in contrast to that of the polyacrylate. Differential Scanning Calorimeters (DSC) analysis confirmed that the glass transition temperature of polyacrylate/nano-SiO₂ (T_g = −24 °C) was higher than that of polyacrylate (T_g = −36 °C). UV analysis showed that the UV absorbency of polyacrylate/silica was improved evidently in contrast to that of polyacrylate.     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

Investigation of the Cu-Zr-Y oxides activity in the carbon black catalytic oxidation by differential thermal analysis and temperature programmed reduction

Different copper/zirconium-yttrium catalysts have been tested in carbon black oxidation reaction. Supported mainly on differential thermal analysis and temperature programmed reduction, two different mechanisms have been proposed to explain the catalytic results. In the absence of copper, it has been shown that Zr³⁺ ions and associated anionic vacancies are responsible to the catalytic enhancement observed in the mixed oxides, oxygen species being activated on these sites. Among mixed zirconia-yttria solids, ZrO₂-5 mol%Y₂O₃ is the most active catalyst. Copper impregnation on these oxides leads to the formation of different copper species. Small particles of CuO in low interaction with the support, induce a catalytic improvement due to the highest reducibility of these species. Moreover, in order to be more efficient, CuO species should have some interactions with the support, since impregnated samples are more active than the simple mechanical mixtures.     

Thermal decomposition study of the coordination compound [Fe(urea)6](NO3)3

The thermochemical behavior of the coordination compound [Fe(urea)₆](NO₃)₃ was studied by simultaneous CG–TG–DTG–DTA and mass spectrometry methods non-isothermal conditions. The compound decomposes at 200 °C into a mixture of spinel-type oxides and hematite. The nature and particle size of the final decomposition products are strongly associated with the conditions during the thermal treatments, in particular the heating rate and the calcination temperature. A certain fraction of the products are formed as nanometric particles; they show superparamagnetic behavior at room temperature. The comparably low temperature of the calcination treatments of this compound is a promising perspective to attain small sized magnetic powders.