Simultaneous,real-time measurement of nitric oxide and oxygen dynamics during cardiac ischemia-reperfusion of the rat utilizing sol-gel-derived electrochemical microsensors

In this study, we simultaneously measured nitric oxide (NO) and oxygen (O₂) dynamics in the myocardium during myocardial ischemia-reperfusion (IR) utilizing sol-gel modified electrochemical NO and O₂ microsensors. In addition, we attempted to clarify the correlation between NO release in the ischemic period and O₂ restoration in the myocardium after reperfusion, comparing a control heart with a remote ischemic preconditioning (RIPC)-treated heart as an attractive strategy for myocardial protection. Rat hearts were randomly divided into two groups: a control group (n = 5) and an RIPC group (n = 5, with RIPC treatment). Myocardia that underwent RIPC treatment (182 ± 70 nM, p < 0.05) released more NO during the ischemic period than those of the control group (63 ± 41 nM). The restoration value of oxygen tension (pO₂) in the RIPC group significantly increased and was restored to pre-ischemic levels (92.6 ± 36.8%); however, the pO₂ of the control group did not increase throughout the reperfusion period (5.7 ± 7.5%, p = 0.001). Myocardial infarct size measurements revealed a significant decrease in cell death in the myocardium region of the RIPC group (41.44 ± 6.42%, p = 0.001) compared with the control group (60.05 ± 10.91%). As a result, we showed that the cardioprotective effect of RIPC could be attributed to endogenous NO production during the ischemic period, which subsequently promoted reoxygenation in post-ischemic myocardia during early reperfusion. Our results suggest that the promotion of endogenous formation during an ischemic episode might be helpful as a therapeutic strategy for protecting the myocardium from IR injury. Additionally, our NO and O₂ perm-selective microsensors could be utilized to evaluate the effect of drug or treatment.     

Synthesis of N-Acyl Triazolyl-Pyrazolines via Acylation Initiated by the Hydrazone Moiety with Carboxylic Acids

An efficient synthesis of N-acyl/N-substituted acyl pyrazolines and their triazole hybrids have been accomplished via acylation of pyrazolines and pyrazoline-triazole hybrids with carboxylic acids and/or substituted carboxylic acids in the absence of activating agents/catalysts. In the present study, a mechanism envisaging the in situ generation of a new transient acylating intermediate has been proposed to explain the acylation.     

Encapsulation of Phenolphthalein pH-Indicator into a Sol-Gel Matrix

Transparent monolithic silica doping with phenolphthalein has been prepared via the acid-catalyzed sol-gel reactions of tetraethylorthosilicate in the presence of phenolphthalein. The immobilized phenolphthalein pH-indicator shows similar behavior as its solution counterpart. The UV/Vis spectra indicate that the phenolphthalein retains its structure during the sol-gel reactions in terms of response to pH. The phenolphthalein can be regarded as uniformly distributed in the silica matrix. This observation has been confirmed using polarized microscopy.     

小麦秸秆发酵产生的真菌Pleurotus ostreatus IBL-02锰过氧化物酶的溶胶-凝胶固定化及其催化污水脱色(英文)

Solid state bio-processing of wheat straw was carried out through an indigenous fungal strain Pleurotus ostreatus IBL-02 under pre-optimized fermentation conditions. The maximum activity, 692±12 U/mL, of the industrially important manganese peroxidase (MnP) enzyme was recorded after five days of still culture incubation. The crude MnP was 2.1-fold purified with a specific activity of 860 U/mg after purification on a Sephadex-G-100 gel column. On native and SDS-PAGE electrophoresis gels, the purified MnP fraction was a single homogenous band of 45 kDa. An active fraction of MnP was immobilized using hydrophobic sol-gel entrapment comprising tetramethoxysilane (T) and propyltrimethoxysilane (P) at different T:P molar ratios. Characterization revealed that after 24 h incubation at varying pH and temperatures, the MnP fraction immobilized at a T:P ratio of 1:2 in the sol-gel retained 82% and 75% of its original activity at pH4 and 70 ℃, respectively. The optimally active fraction at a 1:2 T:P ratio was tested against MnSO4 as a substrate to determine the kinetic catalytic constants KM and Vmax . To explore the industrial applicability of P. ostreatus IBL-02 MnP, both the free and immobilized MnP were used for the decolorization of four different textile industrial effluents. A maximum of 100% decolorization was achieved for the different textile effluents within the shortest time period. A lower KM , higher Vmax , hyper-activation, and enhanced acidic and thermal resistance up to 70 ℃ were the novel catalytic features of the sol-gel immobilized MnP, suggesting that it may be a potential candidate for biotechnological applications particularly for textile bioremediation purposes.     

金纳米粒子在TiO2气凝胶基质上的行为: 光催化活性评价和结构研究

TiO2 -Au aerogels containing different amounts of gold nanoparticles of different sizes (5 and 16 nm) were successfully synthesized using a sol-gel procedure, and were tested for salicylic acid photodegradation under UV irradiation. The structure and morphology of the obtained materials were investigated using X-ray diffraction, transmission electron microscopy, and N2 adsorption-desorption measurements. UV-Vis spectroscopy was used to study the optical properties. The effects of the gold nanoparticles on the TiO2 crystallization process were twofold, as follows: (i) the number of crystallized zones was strongly related to the concentration of the gold nanoparticles, and (ii) the smaller gold particles increased the time taken for the crystallization of the samples. It was found that the noble metal-doped samples exhibited higher degradation rates compared with bare titania. It was found that the most active photocatalyst in each studied system was the sample with the highest concentration of gold nanoparticles. Additionally, the highest degradation rate value was obtained with the smallest Au nanoparticles (46.4 10-3 μmol/(L·s).     

溶胶-凝胶新方法合成介孔铁酸铜纳米粉体催化剂上CO低温氧化(英文)

Mesoporous CuFe2O4 solid solution nanopowders with high specific surface areas were synthesized by a novel, very simple and inexpensive sol-gel route using propylene oxide as gelation agent, and used as the catalyst in low temperature CO oxidation. The samples were characterized by X-ray diffraction, N2 adsorption-desorption, thermogravimetric/differential thermal analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and temperature-programmed reduction. The results revealed that the samples have a nanocrystalline structure with crystals in the range of 10 to 25 nm, and that all the catalysts have mesoporous pores. The addition of Cu into iron oxide affected its structural and catalytic properties. The sample containing 15 mol% Cu showed the highest specific surface area and catalytic activity, and showed high catalytic stability in low temperature CO oxidation.     

Organic–Inorganic Hybrid Supermicroporous Iron(III) Phosphonate Nanoparticles as an Efficient Catalyst for the Synthesis of Biofuels

Here we report a novel family of crystalline, supermicroporous iron(III) phosphonate nanomaterials (HFeP‐1‐3, HFeP‐1‐2, and HFeP‐1‐4) with different Fe^III‐to‐organophosphonate ligand mole ratios. The materials were synthesized by using a hydrothermal reaction between benzene‐1,3,5‐triphosphonic acid and iron(III) chloride under acidic conditions (pH≈4.0). Powder X‐ray diffraction, N₂ sorption, transmission and scanning electron microscopy (TEM and SEM) image analysis, thermogravimetric and differential thermal analysis (TGA‐DTA), and FTIR spectroscopic tools were used to characterize the materials. The triclinic crystal phase [P$\bar 1$ (2) space group] of the hybrid iron phosphonate was established by a Rietveld refinement of the PXRD analysis of HFeP‐1‐3 by using the MAUD program. The unit cell parameters are a=8.749(1), b=8.578(1), c=17.725(3) Å; α=104.47(3), β=97.64(1), γ=113.56(3)°; and V=1013.41 ų. With these crystal parameters, we proposed an 24‐membered‐ring open framework structure for HFeP‐1. Compound HFeP‐1‐3, with an starting Fe/ligand molar ratio of 3.0, shows the highest Brunauer–Emmett–Telller (BET) surface area of 556 m²g^?1 and uniform supermicropores of approximately 1.1 nm. The acidic surface of the porous iron(III) phosphonate nanoparticles was used in a highly efficient and recyclable catalytic transesterification reaction for the synthesis of biofuels under mild reaction conditions.     

Design,synthesis, and characterization of fullerene–peptide–steroid covalent hybrids

The present study reports the synthesis, spectral characterization, self-assembly properties, and preliminary in vitro study of antioxidant capacity of two triple covalent hybrids consisting of fullerene C₆₀, peptide, and steroidal moiety. Previously synthesized fulleropyrrolidinic acid and pregnenolone were connected by peptide linker using a multistep DCC/DMAP and/or EDC/HOBT esterification/amidation procedure. The hybrids were characterized by comparative analysis of spectroscopic data obtained from FTIR, UV–vis, HRMS, and extensive NMR experiments (¹H, ¹³C, COSY, HSQC, and HMBC). The self-assembling properties and morphology of triads samples prepared by drop-drying method were examined by scanning electron microscopy (SEM). Preliminary in vitro antioxidant activity was studied by Ferrous ion Oxidation-Xylenol orange (FOX) method.     

Synthesis and characterization of TENORM-free nano zirconia from zircon sand

To avoid radiation exposure in the use of nano zirconia in the ceramics and dentistry industries, a Technologically Enhanced Natural Radioactive Materials (TENORM)-free nano zirconia was required. The purpose of this research was to obtain an environmentally friendly TENORM-free nano zirconia prototype. TENORM-free nano zirconia synthesis consists of processing zircon sand into sodium zirconate, leaching of sodium zirconate to form zirconyl chloride solution, separation of impurities (silica, ThO₂, U₃O₈, etc.), crystallization of zirconyl chloride, zirconyl-oxalate sol-gel formation, and calcination. The quality test of nano zirconia products was characterized by XRD, FT-IR, SEM, and Surveymeter, while the composition test was carried out by the XRF method. The results of this research obtained an environmentally friendly TENORM-free nano zirconia prototype, that has the chemical compound of ZrO₂, the crystal size was 15.09 nm, the average particle size was 91.33 nm, free of radiation exposure, and its composition includes ZrO₂: 96.599%, HfO₂: 2.899%, and CaO: 0.303%. This synthesis can process zircon sand containing TENORM (ThO₂: 0.070% and U₃O₈: 0.047%) into TENORM-free nano zirconia and increase the added value by increasing the zirconia content from 40.493% to 96.599%.     

Magnetic and dielectric response of M-type barium hexaferrite

Barium hexaferrite (BaFe₁₂O₁₉) is a promising candidate for ceramics, microwave devices and numerous applications. Barium hexaferrite was synthesised via the sol-gel auto-combustion technique using glycine fuel. The X-ray diffraction technique confirmed the hexagonal structure of the particles with space group P63/mmc. The morphological analysis was performed using the field-emission scanning microscope, and the images displayed the plate-like particle formation. Transmission electron microscopy was employed to determine the average particle size of the sample, which was estimated to be 155.93 nm. The magnetic studies were taken through the vibrating sample magnetometer (VSM) at 300 K, with which the saturation magnetization (M_s), coercivity (H_c), squareness ratio (M_r/M_s), and energy product (BH_max) was calculated, and the particles were validated to be in single domain arrangement. The dielectric properties were investigated through the LCR meter. Koop and Maxwell-Wagner's model was used to interpret charge conduction and the occurrence of relaxations in the system.