无定型钼硫化物/还原氧化石墨烯的辐射合成及其电催化析氢性能

钼硫化物被认为是一种高效的电催化析氢反应的催化剂,因此其合成方法受到了广泛的研究和关注。本文以四硫代钼酸铵和氧化石墨为前驱体,利用γ射线对其辐照还原,一步法制备了钼硫化物/还原氧化石墨烯(Mo S_x/RGO)复合材料。通过X射线光电子能谱、X射线衍射、透射电子显微镜、Raman光谱等表征手段确认复合材料中的Mo Sx为无定型结构,且氧化石墨烯得到了有效的还原。同时系统研究了吸收剂量、前驱体配比对复合材料作为析氢反应催化剂性能的影响。结果发现,Mo Sx/RGO复合材料具有优异的催化性能,其催化起始电压为110 m V,在电流密度为10 m A·cm~(-2)时过电势仅为160 m V,Tafel斜率为46 m V·dec~(-1),说明该催化剂催化析氢机理为Volmer-Heyrovesy机理。此外,Mo Sx/RGO复合材料还具有良好的催化稳定性。     

表面暴露活性位点的MoS_2纳米催化剂催化硝基化合物的非均相氢转移反应（英文）

MoS_2具有独特的二维层状结构,被广泛用于加氢脱硫过程以及HER反应,而且可以通过减少MoS_2的颗粒尺寸以及层数来进一步改善其催化活性.通过剥离方法得到的MoS_2纳米片虽然表现出优良的加氢脱硫活性,但容易团聚使其循环使用性能很差.如果通过引入纳米碳将单层的MoS_2纳米片进行有效"隔离",则可明显降低团聚的可能性,从而改善其催化性能和稳定性.本文通过一步水热法制备出了碳嵌入的MoS_2纳米颗粒(MoS_2@C),将其应用于硝基苯类化合物的氢转移反应中表现出了非常好的催化性能.进一步通过粉末X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和在线质谱检测等手段研究了层间距增加的MoS_2催化剂在硝基苯类化合物的氢转移反应中催化性能提升的原因.XRD,SEM和TEM结果表明,通过引入碳材料可以明显增加MoS_2的层间距,同时减小其颗粒尺寸,而且使MoS_2表现出弯曲的(002)晶面.由于存在一定的曲率,这种(002)晶面也会表现出一定的催化能力.氮气物理吸附结果表明,这种MoS_2@C复合物具有较高的比表面积(89 m~2g~(-1))和明显的介孔结构(~20 nm),在催化反应中有利于底物扩散,进而改善催化性能.XPS结果显示,与体相的MoS_2相比,MoS_2@C表面暴露出更多的不饱和Mo原子(Mo/S=0.71(MoS_2@C)vs Mo/S=0.63(MoS_2)),形成了独特的S-Mo-O结构以及缺陷结构.在硝基苯类化合物的氢转移反应中,层间距增加的MoS_2@C由于暴露出更多的活性位和具有弯曲的(002)晶面,表现出了更高的催化活性–(TOF=3.66 s~(-1) vs 1.24 s~(-1)(MoS_2)).通过质谱对反应过程的追踪发现,在只有肼存在的条件下,MoS_2@C催化肼分解的主要气相产物是氨气.这说明MoS_2@C能够使肼发生N-N键的断裂.而当肼和硝基苯同时存在的条件下,质谱检测的气相产物主要是氮气,表明硝基苯的存在可以诱导肼逐步发生N-H键断裂,在催化剂表面形成活性的H物种,进而转移到硝基苯上使其还原得到苯胺.使用偶氮苯和氧化偶氮苯作为反应底物,发现MoS_2@C很难使其还原为苯胺,这说明在该催化体系中,硝基苯的还原过程主要是沿着直接路径(硝基苯-亚硝基苯-苯胺)进行的.     

钼蓝光度法测定蔗糖的研究

试验中发现,在0.27 mol.L-1硫酸介质中,钼酸铵与蔗糖发生显色反应生成钼蓝,所生成的钼蓝最大吸收波长在700 nm,蔗糖溶液在0.15~19.07 mg.L-1服从比耳定律,表观摩尔吸光系数为1.35×104L.mol-1.cm-1。方法的选择性良好,用于甘蔗汁样品的测定,结果的RSD在0.53%~0.66%之间,相应于测定的蔗糖浓度范围为119~157 g.L-1,回收率在97.9%~102.4%。     

Further studies of M3(μ3-O)(μ-X)3(μ-O2CCH3)3L3 (M=Mo,W) type clusters with nine core electrons

Four new compounds having nine cluster electrons and cores of the types Mo₃OCl₃, Mo₃OBr₃, and W₃OCl₃ are reported. Compound (1) prepared by reduction of [Bu₄N][Mo₃OCl₆(OAc)₃] in THF with metallic zinc, was shown by X-ray crystallography to be Mo₃OCl₄(OAc)₃ (THF)₂ (1). It forms crystals in space groupP2₁ with unit cell dimensionsa=9.472(2) Å,b=13.546(4) Å,c=9.652(2) Å, =101.70(2)°,V=1201(1) Å₃,Z=2. The [Mo₃(₃-O)(-Cl)₃]⁴⁺ core is surrounded by three -O₂CCH₃ anions, one Cl^–, and two THF and has Mo-Mo distances of 2.620(1) Å, 2.613(1) Å, and 2.530(1) Å, with the shortest bond between the two Mo atoms to which the THF molecules are coordinated. Compounds [Bu₄N]₂ [Mo₃OBr₆(O₂CCH₃)₃] · Me₂CO, (2) and [Mo₃OBr₃(O₂CCH₃)₃(PMe₃)₃]₃ · BF₄, (3) are the first two nine-electron Mo₃ species with a [Mo₃(₃-O) Br₃]⁴⁺ core. Both were obtained by zinc reduction of [Mo₃OBr₆(O₂CCH₃)₃]^– in the presence of (NBu₄) Br (2) or PMe₃ and NaBF₄ (3), and each was characterized crystallographically. Compound (2) crystallized in space group Cc with unit cell dimensionsa=25.037(5) Å,b=12.827(2) Å,c=21.484(4) Å, =122.96(1)⁰,V=5790(3) ų,Z=4. While the anion has no crystallographically required symmetry, its virtual symmetry is C_3v . The Mo-Mo distances are 2.619(2) Å, 2.610(3) Å, 2.644(2) Å, with a mean value of 2.624[14] Å. Compound (3) crystallized in space groupP2₁/c with unit cell dimensionsa=10.846(2) Å,b=25.033(5) Å,c=12.641(5) Å, =94.74(2)⁰,V=3420(2) ų,Z=4. The cation occupies a general position but has virtual C_3v symmetry, with Mo-Mo distances of 2.601(2) Å, 2.610(2) Å, 2.627(2) Å, with a mean value of 2.613[14] Å. Thus the anionic and cationic Mo₃ clusters in (2) and (3), respectively, have average Mo-Mo distances that are equal within experimental error. Compound (4), [NEt₄]₂ [W₃OCl₆(O₂CCH₃)₃] is the first 9-electron compound of this type containing tungsten. It was prepared by reduction of [Et₄N][W₃OCl₆(OAc)₃] in benzene with Na/Hg. It crystallized in space groupP2₁2₁2₁ with unit cell dimensionsa=11.076(2) Å,b=14.345(2) Å,c=21.026(3) Å,V=3574(1) ų,Z=4. The anion resides on a general position but has virtual C_3v symmetry, with W-W distances of 2.577(1) Å, 2.612(1) Å, 2.584(1) Å and a mean value of 2.591[15] Å.     

Untersuchungen im System V—Mo—N

The system V–Mo–N has been investigated at 1,100°C and nitrogen pressures between 1 and 300 bar by X-ray techniques. The isotypic compounds VN and Mo₂N are forming a complete series of solid solutions at nitrogen pressures>30 bar. At a nitrogen pressure of 1 bar about 10% of the V-atoms can be replaced by Mo-atoms in the MN_1-x -compounds. Within the M₂N-phase V-atoms can be replaced by Mo-atoms in the range of 10%.

     

Chemometric interpretation of pesticide occurence in soil samples from an intensive horticulture area in north Portugal

An extensive monitoring programme of pesticides was carried out in soil samples from an intensive horticulture area in north of Portugal, putting into practice the needs for increased control of soil quality as far as organic pollution is concerned. The area under investigation was additionally defined as vulnerable to nitrates due to local soil and aquifer characteristics, which might be extended to pesticides contamination. Five sampling sites were selected and soils analysed at three depths in eight sampling campaigns, for the period of 2 years. A stepwise multivariate statistical approach was selected to uncover most relevant patterns inside a complex environmental data matrix. Cluster analysis was applied both to group pesticides and samples, giving a primary and unsupervised overlook of privileged relationships. Clusters of persistent pesticides and selected herbicides were identified, whereas sample classes were also formed and disposed geographically. Thirty eight percent of analysed soils samples fell into one class characterized by low contamination (class 1 in cluster analysis), which is entirely representative of the sampling site no. 1. Afterwards, linear discriminant analysis was applied to identify those pesticides, which had a higher impact in the definition of classes. Finally, factor analysis using a five component model was implemented in order to bring to light the constitution and data variance explained by each of the five main principal components, as well as, their relation to pest management practices. A factor was identified (PC1 – 22% variance) composed of chlorinated pesticides, which was representative of one of the investigated sites indicating its high contamination status. Qualitative main findings and class average concentration values were obtained through this multivariate statistical approach.     

fac-Acetato-bis(pyrazole) complexes: A systematic study on intra- and intermolecular hydrogen bonds

Acetato-bis(pyrazole) complexes [Mo(η³-methallyl)(O₂CMe)(CO)₂(pz^∗H)₂], (methallyl = CH₂C(CH₃)CH₂) and fac-[M(O₂CMe)(CO)₃(pz^∗H)₂], (pz^∗H = pyrazole or 3,5-dimethylpyrazole, dmpzH; M = Mn, Re) are obtained from [Mo(η³-methallyl)Cl(CO)₂(NCMe)₂] or fac-[MBr(CO)₃(NCMe)₂] [M = Mn (synthesized in situ), Re], 2 equiv. of pyrazole, and 1 equiv. of sodium acetate for Mo complexes, or silver acetate for Mn or Re complexes. The chlorido-complexes [Mo(η³-methallyl)Cl(CO)₂L₂] (L = pzH, dmpzH), obtained from the same starting material by substitution of MeCN by pzH or dmpzH, are also described. The crystal structures of the fac-acetato-bis(dimethylpyrazole) complexes present the same pattern of intramolecular hydrogen bonds between the acetate and the dimetylpyrazole ligands, whereas the crystal structures of the fac-acetato-bis(pyrazole) complexes show different hydrogen bonds patterns, with intermolecular interactions. NMR data indicate that these interactions are not maintained in solution.     

若干具有[(PO_4)_4Mo_6~ⅤO_(15)]~(12-)簇骼的化合物的光谱研究

用FTIR ,NIRFT Raman ,UV VisDRS和荧光光谱等对五个新型具有 [(PO4) 4 MoⅤ6O15]12 -阴离子簇的化合物 :Na·(H4TETA) 3 ·(H3 O) 5·{Zn[(HPO4) 2 (PO4) 2 Mo6O15]2 } (2 ) ,(H2 en) 7·(H3 O) 4 ·{Cu[(HPO4) 2(PO4) 2 Mo6O15]2 }·H2 O (3) ,(H3 DETA) 2 ·(H3 O) 3 ·{Co0 5[(HPO4) 2 (PO4) 2 Mo6O15]}·H2 O (4) ,[Co(H3 TETA) ]2 {Co0 5[(HPO4) (PO4) 3 Mo6O15]}· 3 5H2 O (5 )和 (H3 DETA)· (H3 O ) 4 · {Co1 5[(HPO4) 2(PO4) 2 Mo6O15]}·0 5H2 O (6 ) ,进行研究 ,并探讨其结构和性能的关系。这些化合物具有 {M [(PO4) 4 Mo6O15]2 }二聚体单元 ,化合物 2～ 4的二聚体间通过与有机分子和水分子的氢键形成三维网状结构 ;化合物 5和 6的 {Co[(PO4) 4 Mo6O15]2 }二聚体间是分别通过 [CoH3 TEATA]基团和CoO4四面体组成网状结构。磷钼酸盐的特征振动频率和这些化合物的结构相关 ;化合物的三个UV VisDRS特征谱带分别属于Od→Mo,Oμ→Mo和O→M电荷转移 ;观察到以 2 4 0nm激发 ,在 4 10nm附近出现的由Oμ→Mo跃迁激发引起的较强的荧光发射谱带。     

Comparison of two laser-induced breakdown spectroscopy techniques for total carbon measurement in soils

The potentials of two advanced laser-induced breakdown spectroscopy (LIBS) techniques which are used to determine the total carbon content in soils have been examined. The first one is the combination of a single-pulse laser ablation with spark excitation of plasma plume triggering the gap between electrodes close to the target surface. The second one is a more conventional double-pulse LIBS. In both modes the calibration graphs have a nonlinear trend in the actual range of carbon contents and present a good R² value (0.97). In the combined laser-spark approach, using low-cost and portable laser instrumentation is possible, as well as inducing a micro-damage on the target surface. Certain regularities in the spectral line intensities of soil nutritious elements have been detected and appear to be connected to the total carbon content and to the soil origin.     

Determination of chlorpyrifos in soils using multi-throughput dynamic microwave-assisted extraction coupled online with salting-out-assisted liquid–liquid extraction followed by LC–MS/MS

A simple and rapid method based on multi-throughput dynamic microwave-assisted extraction coupled online with salting-out-assisted liquid–liquid extraction was developed for the analysis of chlorpyrifos in soil. First, the chlorpyrifos was extracted with acetonitrile aqueous (50%, v/v) under the action of microwave energy. Then the obtained extract was separated clearly and easily into an acetonitrile phase and an aqueous phase with the assistance of ammonium acetate. The acetonitrile phase containing chlorpyrifos was concentrated and determined by liquid chromatography–tandem mass spectrometry. The effects of parameters on extraction efficiency including microwave power, extraction solvent, volumes and flow rate of extraction solvent, sample pH, types and amount of salt were studied and optimised. To eliminate the matrix effect, validation of the method was carried out using the matrix-based calibration curve. The limits of detection and quantification for chlorpyrifos were 0.17 and 0.5 ng g^?1, respectively. The proposed method was applied to analyse chlorpyrifos in five soil samples and verified by the recovery test. The recoveries of chlorpyrifos at three spiked levels (5, 50, 200 ng g^?1) were in the range of 90.0–100.5%, with relative standard deviations varying from 1.3% to 5.7%. Compared with the methods reported previously, the proposed method can simplify the operation procedure and reduce solvent consumption in sample pretreatment.