Use of mobile phase 18-crown-6 to improve peak resolution between mono- and divalent metal and amine cations in ion chromatography

It is difficult to quantify NH4+ by ion chromatography in the presence of high concentrations of Na+ due to peak overlap. The Dionex IonPac CS15 column, which contains phosphonate, carboxylate, and 18-crown-6 functional groups, was originally developed to overcome this problem. We have found that the addition of 18-crown-6 to the eluent promotes improved peak resolution between Na+ and NH4+ even at concentrations as high as 60,000 to 1 using this column. Its use also improves the separation of alkali and alkaline earth metal and amine cations. Mobile phase 18-crown-6 increased the retention times of CH3NH3+, NH4+, and K+, and decreased the retention time of Sr2+. The retention times of Li+, Na+, Mg2+, Ca2+, (CH3)2NH2+, and (CH3)3NH+ were not affected. This method makes possible the direct analysis of ammonia from nitrogenase, the enzyme responsible for biological nitrogen fixation. The resolution of the NH4+ peak from the Na+ and Mg2+ peaks improved from zero resolution to values of 6.19 and 5.65, respectively. This technique considerably reduces the analysis time of NH4+ in the presence of high concentrations of Mg2+ and Na+ over traditional indophenol measurements.     

Formation of two isomeric closo-[(eta5-C5H5)FePC2B8H10] phosphadicarbaborane analogues of ferrocene via isolable eta1-bonded complexes of the [7-[(eta5-C5H5)Fe(CO)2]-(eta1-nido-PC2B8H10)] type

The reaction of nido-[7,8,9-PC(2)B(8)H(11)] (1) with [[CpFe(CO)(2)](2)] (Cp=eta(5)-C(5)H(5) (-)) in benzene (reflux, 3 days) gave an eta(1)-bonded complex [7-Fp-(eta(1)-nido-7,8,9,-PC(2)B(8)H(10))] (2; Fp=CpFe(CO)(2); yield 38 %). A similar reaction at elevated temperatures (xylene, reflux 24 h) gave the isomeric complex [7-Fp-(eta(1)-nido-7,9,10-PC(2)B(8)H(10))] (3; yield 28 %) together with the fully sandwiched complexes [1-Cp-closo-1,2,4,5-FePC(2)B(8)H(10)] 4 a (yield 30%) and [1-Cp-closo-1,2,4,8-FePC(2)B(8)H(10)] 4 b (yield 5%). Compounds 2 and 3 are isolable intermediates along the full eta(5)-complexation pathway of the phosphadicarbaborane cage; their heating (xylene, reflux, 24 h) leads finally to the isolation of compounds 4 a (yields 46 and 52%, respectively) and 4 b (yields 4 and 5%, respectively). Moreover, compound 3 is isolated as a side product from the heating of 2 (yield 10%). The structure of compound 4 a was determined by an X-ray structural analysis and the constitution of all compounds is consistent with the results of mass spectrometry and IR spectroscopy. Multinuclear ((1)H, (11)B, (31)P, and (13)C), two-dimensional [(11)B-(11)B]-COSY, and (1)H[(11)B(selective)] magnetic resonance measurements led to complete assignments of all resonances and are in excellent agreement with the structures proposed.     

Surface properties of the binary mixed systems of alkylpyridinium halides and sodium alkylsulfonates

Surface properties of the binary mixed systems of decyl- and dodecylpyridinium chloride or bromide and sodium pentyl- and heptylsulfonate have been investigated. The surface tension of solutions of equimolar mixtures of surfactants and individual surfactants was measured, and the composition of mixed monolayers and surface interaction parameter β were calculated with the regular solution theory. Our results indicate that the properties of mixed films depend on both ionic strength and the kind of added inorganic electrolyte. With the increase of inorganic electrolyte concentration, the content of more surface active ions in the adsorption films enhances and is the highest in the presence of NaI and the smallest when solutions contain NaCl. Mutual interactions in mixed adsorbed films were found to be attractive. However, the strength of interaction weakens with the increase of ionic strength and depends on the kind of inorganic ions in the order: Cl⁻>Br⁻>I⁻.     

Sodium “stuffed” Ba2−xSrxFe4O8 ferrites: new cationic conductors

Sodium insertion in the tetrahedral layer structure of the ferrites Ba_2−xSr_xFe₄O₈ was performed by solid state reaction at 1220 K in air. Superstoichiometric oxides with the actual formula (Ba_2−xSr_x)_1−y/4Na_yFe₄O₈—y0.56; 0.60Ba/Sr1.67—were characterized by X-ray and neutron powder diffraction. The hexagonal unit-cell volume shows an increasing dependence on the sodium insertion when the Ba/Sr ratio reaches the largest values. The marked expansion of the c parameter is the likely signature of the location of the inserted sodium cations within the interlayer space. One-half of the sodium cations partly sits on the Sr(Ba) sites in octahedral coordination and the other half occupies extra octahedral and tetrahedral sites. ac conductivity measurements point to a cationic conductivity whose thermally activated regime—E_a 0.7 eV—evidenced from 570 K, is unsensitive to the sodium content. The bottleneck of the 2D sodium mobility regards the crossing of the oxygen triangular faces shared by the different polyhedra within the interlayer space.     

Facile Synthesis and Palladium‐Catalyzed Cross‐Coupling Reactions of 2,3‐Bis(pinacolatoboryl)‐1,3‐butadiene

Treatment of 1,1‐bis(pinacolatoboryl)ethene with an excess of 1‐bromo‐1‐lithioethene gave 2,3‐bis(pinacolatoboryl)‐1,3‐butadiene in high yield. Palladium‐catalyzed cross‐coupling of the resulting diborylbutadiene with aryl iodides took place smoothly in the presence of a catalytic amount of Pd(OAc)₂/PPh₃ and aqueous KOH to give 2,3‐diaryl‐1,3‐butadienes in good yields. The coupling reaction with commercially available 4‐acetoxyphenylmethyl chloride under the same conditions followed by hydrolysis of the acetyl groups gave anolignan B in a one‐pot manner. A variety of [3]‐ to [6]dendralenes were synthesized by palladium‐catalyzed coupling of the diene or 1,1‐bis(pinacolato)borylethene with alkenyl or dienyl halides, respectively, in good yields.     

Regioselective Borylation of Porphyrins by C?H Bond Activation under Iridium Catalysis to Afford Useful Building Blocks for Porphyrin Assemblies

Highly regioselective and efficient borylation of a variety of porphyrins has been achieved by reaction with bis(pinacolato)diboron through C? H bond activation under iridium catalysis on the basis of the synthetic protocol developed by Miyaura, Hartwig, and Smith. A boryl group can be selectively introduced at sterically uncongested positions in the peripheral aryl groups of porphyrin substrates whose peripheral β‐positions are sterically hindered. Curiously, β substituents adjacent to the aryl group to be borylated have unexpectedly large effects on the regioselectivity, because the iridium catalyst can discriminate between subtle steric differences. Chemoselective borylation was also achieved for several functionalized porphyrins. This borylation protocol can be applied to various monomeric and oligomeric functional porphyrins, hence offering an efficient route to elaborate multiporphyrin‐based molecular constructs.     

Synergistic Effect of Boron Nitride and Carbon Domains in Boron Carbide Nitride Nanotube Supported Single-Atom Catalysts for Efficient Nitrogen Fixation

Developing the low-cost and efficient single-atom catalysts (SACs) for nitrogen reduction reaction (NRR) is of great importance while remains as a great challenge. The catalytic activity, selectivity and durability are all fundamentally related to the elaborate coordination environment of SACs. Using first-principles calculations, we investigated the SACs with single transition metal (TM) atom supported on defective boron carbide nitride nanotubes (BCNTs) as NRR electrocatalysts. Our results suggest that boron-vacancy defects on BCNTs can strongly immobilize TM atoms with large enough binding energy and high thermal/structural stability. Importantly, the synergistic effect of boron nitride (BN) and carbon domains comes up with the modifications of the charge polarization of single-TM-atom active site and the electronic properties of material, which has been proven to be the essential key to promote N₂ adsorption, activation, and reduction. Specifically, six SACs (namely V, Mn, Fe, Mo, Ru, and W atoms embedded into defective BCNTs) can be used as promising candidates for NRR electrocatalysts as their NRR activity is higher than the state-of-the art Ru(0001) catalyst. In particular, single Mo atom supported on defective BCNTs with large tube diameter possesses the highest NRR activity while suppressing the competitive hydrogen evolution reaction, with a low limiting potential of −0.62 V via associative distal path. This work suggests new opportunities for driving NH₃ production by carbon-based single-atom electrocatalysts under ambient conditions.     

Base‐Stabilized Phosphinidene Boranes by Silylium‐Ion Abstraction

We report the preparation of N‐heterocyclic carbene (NHC)‐stabilized compounds containing P=B double bonds. The reaction of the highly functionalized phosphinoborane Mes*(SiMe₃)P?B(Cl)Cp* with Lewis bases allows access to base‐stabilized phosphinidene boranes Mes*P=B(L)Cp* (L=4‐dimethylaminopyridine (DMAP), NHC) by Me₃SiCl elimination. The formation of these species is shown to proceed through transient borylphosphide anions generated by Me₃Si abstraction.