粉末化学镀法制备的NiB／TiO2非晶态合金催化剂对环丁烯砜加氢反应的催化性能

 采用诱导沉积法及粉末化学镀法分别制备了纯态NiB及负载型NiB／TiO2非晶态合金催化剂．用XRD，ICP，SEM，TEM和DSC等手段对催化剂的物性及TiO2载体与NiB非晶态合金之间的相互作用进行了表征，考察了非晶态合金的结构、组成、形貌和热稳定性，并将其用于环丁烯砜加氢反应中．结果表明，相对于NiB而言，NiB／TiO2催化剂具有优良的热稳定性和催化活性，这缘于NiB和TiO2载体之间的相互作用及载体的分散作用．     

Electrosorption of sodium cellulose sulfates with different substitution patterns

Various types of sodium cellulose sulfate (SCS), dissolved in a 1M LiCl solution, were investigated by alternating current (AC)polarography. The SCS samples differed in the degree of substitution (DS), thedistribution of substituents within the anhydroglucose unit (AGU), and alongthechain, due to the method of synthesis. The goal was to study theelectrosorptionbehavior, characterized by the shape of the desorption wave in the polarogram,as a function of the chemical structure of the SCS samples. The shape of thedesorption wave reflects domains of different substitution. A superimpositionofparameters like DS and pattern of substitution on the electrosorption behaviorwas observed. The AC polarography method described can be used as a tool todistinguish between an even or uneven distribution of substituents along thecellulose chain.     

一阶导数光谱K系数法同时测定硝基酚钠三组分

研究和建立了同时测定硝基酚钠混合三组份的新方法——一阶导数光谱K系数法。确定了最佳实验条件和测定波长,方法简便、快速、准确。通过对动植物细胞赋活增进剂中邻硝基酚钠、对硝基酚钠、5-硝基愈创木酚钠三组份的直接测定,其相对误差小于2%,相对标准偏差小于3%,回收率为99～103%。     

Co-catalyzed reductive cyclization of azido and cyano substituted α,β-unsaturated esters with NaBH4: enantioselective synthesis of (R)-baclofen and (R)-rolipram

Sodium borohydride in combination with a catalytic amount of CoCl₂ has been found to be an excellent catalytic system in reductive cyclizations of suitably substituted azido and cyano groups of α,β-unsaturated esters to afford γ and δ-lactams in high yields. The process has been demonstrated for the enantioselective synthesis of (R)-baclofen, (R)-rolipram, and (R)-4-fluorophenylpiperidinone, a key intermediate for (−)-paroxetine.     

Sodium bromide catalysed one-pot synthesis of tetrahydrobenzo[b]pyrans via a three-component cyclocondensation under microwave irradiation and solvent free conditions

Sodium bromide catalysed three-component cyclocondensation of aryl aldehydes, alkyl nitriles and dimedone proceeds under microwave irradiation in solvent free conditions to give highly functionalised tetrahydrobenzo[b]pyrans in excellent yields.     

Facile polyethylene glycol (PEG-400) promoted synthesis of β-ketosulfones

An efficient and convenient synthesis of β-ketosulfones is described. Reaction of an α-haloketone with sodium alkyl/aryl sulphinate yields the corresponding β-ketosulfone promoted by polyethylene glycol (PEG-400) as an efficient reaction medium.     

Physicochemical study of ovalbumin in the presence of sodium dodecyl sulphate in aqueous media

The interactions of sodium dodecyl sulphate with ovalbumin in aqueous solution at room temperature are described for a wide concentration range of both substances. A phase diagram covering a wide range of concentrations shows a total of five different morphologies. Dynamic light scattering of the samples from each morphology offered better understanding of the different structures (between three and four) present in the solution. The amount of ovalbumin present in the solution was confirmed with differential scanning spectroscopy, while the interactions between sodium dodecyl sulphate and ovalbumin were interpreted by zeta potential and electrical conductivity measurements.     

Microemulsion photopolymerization of methacrylates stabilized with sodium dodecyl sulfate and poly(N-acetylethylenimine) macromonomers

Methyl methacrylate and butyl methacrylate were polymerized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS). A poly(N-acetylethylenimine) (PNAEI) macromer was also included in the recipe, as a cosurfactant and a comonomer. Polymerizations were initiated by UV-irradiation. The average diameters of latex particles, obtained by STM, were in the range of 17-200 nm. The experimental data evidenced that the particle size was mainly dependent on the SDS/PNAEI ratio. Polymerization yields were around 75-85%. The synthesized copolymers have viscosity average molecular weights in the range of 2.1-2.4×10⁶ and glass transition temperatures of 38.0-43.5°C, lower than those obtained without using PNAEI. The investigation by means of FTIR and 1H-NMR techniques revealed that PNAEI was incorporated into the nanoparticles.     

Metal-Boron Compounds – Problems and Perspectives

“True” metal-boron compounds have been known for about ten years. The bonding between the metal and boron atoms can vary widely in nature: Not only simple covalent bonds are encountered but also coordinate bonds and boron-metal multicenter bonds. Furthermore, π complexes of transition metals with boron-nitrogen systems and metal complexes containing boron(I) compounds as ligands have recently also been prepared.     

烷基硫酸钠对MMA种子乳液聚合的影响

研究了烷基硫酸钠纯度，烷基碳链分布对甲基丙烯酸甲酯种子乳液聚合反应的影响。结果表明，烷基硫酸钠中乙醇不溶物含量的增加，可提高ＭＭＡ乳液聚合反应速度，在采用Ｋ２Ｓ２Ｏ８－ＮａＨＳＯ３－Ｃｕ＾２＋三元氧化－还原引发体系的ＭＭＡ乳液聚合中，Ｆｅ＾２＋降低反应速率，而Ｆｅ＾３＋则提高聚合反应速率；