Copper(II) tetrafluoroborate as a novel and highly efficient catalyst for Michael addition of mercaptans to α,β-unsaturated carbonyl compounds

Copper(II) tetrafluoroborate has been found to be a new and highly efficient catalyst for Michael addition of thiols to α,β-unsaturated carbonyl compounds under solvent-free conditions and in H₂O at room temperature. The reactions are very fast and are completed in 2 min to 1 h affording high yields. The rate of thiol addition was dependent on the steric hindrance at the β-carbon of the α,β-unsaturated carbonyl substrate. In the case of chalcones, the reactions are best carried out in MeOH as solvent.     

Interaction of sodium cholate with dioctadecyldimethylammonium chloride vesicles in aqueous dispersion

Mixtures of dioctadecyldimethylammonium chloride (DODAC) cationic vesicle dispersions with aqueous micelle solutions of the anionic sodium cholate (NaC) were investigated by differential scanning calorimetry, DSC, turbidity and light scattering. Within the concentration range investigated (constant 1.0 mM DODAC and varying NaC concentration up to 4 mM), vesicle → micelle → aggregate transitions were observed. The turbidity of DODAC/NaC/water depends on time and NaC/DODAB molar concentration ratio R. At equilibrium, turbidity initially decreases smoothly with R to a low value (owing to the vesicle–micelle transition) when R = 0.5–0.8 and then increases steeply to a high value (owing to the micelle–aggregate transition) when R = 0.9–1.0. DSC thermograms exhibit a single and sharp endothermic peak at T_m ≈ 49 °C, characteristic of the melting temperature of neat DODAC vesicles in water. Upon addition of NaC, T_m initially decreases to vanish around R = 0.5, and the main transition peak broadens as R increases. For R > 1.0 two new (endo- and exothermic) peaks appear at lower temperatures indicating the formation of large aggregates since the dispersion is turbid. All samples are non-birefringent. Dynamic light scattering (DLS) data indicate that both DODAC and DODAC/NaC dispersions are highly polydisperse, and that the mean size of the aggregates tends to decrease as R increases.     

几种光敏剂光敏氧化效率的比较

<正> 光敏氧化效率是由敏化剂分子吸收光量子数及其产生单重态氧的量子产率决定的,这要求敏化剂的吸收光谱同光源的发射光谱很好地匹配。本文报道竹红菌甲素匹配高压钠灯有效地产生单重态氧,高效光敏氧化一系列具有不同反应活性的底物,成为单重态氧化学中一个新的光敏氧化体系。     

Determination of butyl- and phenyltin compounds in biological material by gas chromatography-flame photometric detection after ethylation with sodium tetraethylborate

A reliable and rapid speciation method for the simultaneous determination of butyl- and phenyltin species in biological samples has been developed. Three extraction procedures are compared: enzymatic hydrolysis and solubilization by ethanoic and hydrochloric acids. Derivatization is performed by the one-step ethylation/extraction procedure using the sodium tetraethylborate reagent directly in the aqueous phase in the presence of an isooctane layer. Analysis is performed using capillary gas chromatography coupled to flame photometric detection. The detection limits are in the range of a few ng(Sn)/g. Analysis of the environmental samples and the certified reference material demonstrates the accuracy of the analytical method.     

Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.     

FI－ICP－AES在线稀释间接测定表面活性剂─十二烷基苯磺酸钠

基于十二烷基苯磺酸钠（ＤＢＳ）与无机钠盐在无水乙醇中溶解度的差异，用乙醇选择提取ＤＢＳ，经水适当稀释，通过用ＦＩ－ＩＣＰ－ＡＥＳ测定其中的钠，从而间接测定ＤＢＳ的含量。     

Zwei neue Metatitanate mit fünffach koordiniertem Titan: CsNaTiO3 und RbNaTiO3

Two New Metatitanates with Five-coordinated Titanium: CsNaTiO₃ and RbNaTiO₃ [1] The new oxides CsNaTiO₃ (I) and RbNaTiO₃ (II) are obtained by heating well grounded mixtures of the binary oxides in Ni-tubes as colourless platelike crystals. I: CsO_0.56, NaO_0.48 and TiO₂, Cs:Na:Ti = 1.1:1.1:1.0; 600°C, 61 d as well as CsO_0.97, NaO_0.48 and Ti₂O₃, Cs:Na:Ti = 1.5:3.0:1.0; 760°C, 27 d. II: RbO_0.52, NaO_0.48 and TiO₂, Rb:Na:Ti = 1.1:1.1:1.0; 750°C, 14 d as well as RbO_0.98, NaO_0.48 and Ti₂O₃, Rb:Na:Ti = 1.5:3.1:1.0; 760°C, 27 d. CsNaTiO₃ (orthorhombic, Cmcm) is nearly isostructural with KNaTiO₃ [2]; a = 601.4(1) pm, b = 1 120.3(1) pm, c = 563.4(1) pm (Guinier-Simon-Data, Z = 4). RbNaTiO₃ (monoclinic, C2/c) is isostructural with KNaTiO₃; a = 590.3(1) pm, b = 1 098.4(1) pm, c = 555.1(0) pm, β = 92.15° (Guinier-Simon-Data, Z = 4). Both structures are determined by using four-circle diffractometer data (CsNaTiO₃: Siemens AED2, 2 896I_o(hkl), MoKα , R = 2.4%, R_w = 2.3%; RbNaTiO₃: Philips PW 1 100, 2 743I_o(hkl), AgKα , R = 9.9%, R_w = 8.9%; additional data see text). The Madelung Part of Lattice Energy (MAPLE), Effective Coordination Numbers (ECoN), Mean Fictive Ionic Radii (MEFIR) and the Charge Distribution in Solids are calculated and discussed.     

胶束增敏荧光光谱法测定吡哌酸

采用不同表面活性剂对吡哌酸在胶束体系中的荧光性质进行了研究，发现在酸性介质中十二烷基硫酸钠(SDS)对吡哌酸有较强的增敏作用，据此建立了胶束增敏荧光光谱法测定吡哌酸的新方法。方法线性范围为0．07-0．36μg／mL，检出限为0.04μg／mL，平均回收率为98．6％-101．3％，相对标准偏差为1．1％-1．2％。样品测定结果令人满意。     

Surface structures of adsorption layers of sodium hyaluronate and bovine serum albumin complexes on poly(γ-methyl-l-glutamate) film and their surface properties

Two-dimensional structures and characteristics of the complexes between sodium hyaluronate (NaHA) and bovine serum albumin (BSA) were studied by using a quartz crystal microbalance method and an atomic force microscope (AFM). NaHA did not adsorb on poly(-methyl-l-glutamate) (PMLG) film. On the other hand, the complexes adsorbed on it and the adsorption behaviors were found to be Langmuir types. With increasing weight ratio of BSA to NaHA, W _BSA, the adsorption constants K decreased and the saturated adsorption masses increased. The adsorbed complexes were spherical particles and at saturated adsorption states they covered compactly on the PMLG film. The mean diameters d _AFM estimated from the topographic images decreased from 70 to 54 nm with increasing W _BSA. The adhesion force F _ad and the frictional force F _f between the complex layers and the AFM tip were obtained by using the contact mode of the AFM. With increasing W _BSA, the values of F _ad decreased and the values of F _f increased. Compared with the frictional coefficient of the NaHA adsorption layer on the BSA monolayer, the values for the NaHA–BSA complex layer were found to be much higher.     

Synthesis of sodium-polystyrenesulfonate-grafted nanoparticles by core-cross-linking of block copolymer micelles

Sodium poly(styrenesulfonate)(polySSNa)-grafted polymer nanoparticles were synthesized by core-cross-linking of block copolymer micelles and subsequent chemical transformation. Block copolymers, poly(p-((1-methyl)silacyclobutyl)styrene-block-poly(neopentyl p-styrenesulfonate)s, polySBS-b-polySSPen, were synthesized by nitroxy-mediated living radical polymerization. The block copolymers formed micelles (R_h=15-23 nm, where R_h represents the hydrodynamic radius) with a polySBS core and polySSPen shell in acetone. The micelle core was cross-linked by ring-opening polymerization of silacyclobutyl groups in polySBS. Hydrolysis of the neopentyl groups provided polySSNa-grafted nanoparticles. The R_h of the particles before the hydrolysis ranged from 12 to 21 nm in acetone, while they varied to the range from 50 to 110 nm in water after the hydrolysis.