硅钼杂多阴离子薄膜修饰电极线性扫描伏安法测定黑液中可溶性硅

本文报导了以玻碳电极为基体的１：１２硅钼杂多阴离子薄膜化学修铈电极的制备及其电化学特性。并应用于导数伏安法测定。在４．０×１０￣（－３）ｍ０ｌ／Ｌ（ＮＨ＿４）＿６ＭＯ＿７Ｏ＿（２４）－６．８×１０￣（－２）ｍｏｌ／ＬＮａ＿３Ｃｉｔ－０．４８ｍｏｌ／ＬＮＨＯ＿３体系中，硅浓度在８．３×１０￣（－７）～１．７×１０￣（－３）ｍｏｌ／Ｌ范围内与峰电流呈良好线性关系，检测限为８．０×１０￣（－７）ｍｏｌ／Ｌ。对可溶性硅（以ＳｉＯ＿２计）为２４５．０５ｍｇ／Ｌ的黑液，稀释１０倍后，取２．００ｍＬ平行测定９次，ＲＳＤ为０．５８％，加标回收率在９７．３％～１０４．４％间。     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

集成微管路离子选择电极功能块研究

本文对微型管状离子选择电极在流动条件下的电化学特征进行了研究,并设计了新的集成微管路离子选择以电极功能块。用此微型装置测定了土壤、血清、水和药物中的K~+、Na~+、pH、Cl~-、F~-、阿托品、东茛菪碱,并和各种标准方法作了比较,获得满意分析结果。     

高温下硅酸锂吸收CO2的研究

以SiO₂和Li₂CO₃为反应原料，采用高温固相法于不同温度下合成了一系列可在高温500~750 ℃之间直接吸收CO₂的硅酸锂(Li₄SiO₄)材料。采用扫描电子显微镜(SEM)、X射线粉末衍射仪(XRD)分别观察和评价了合成材料的表面形貌与结构特征，用热重分析仪(TG)研究了硅酸锂材料吸收CO₂的性能。实验结果表明，在750 ℃下煅烧6 h即可合成出吸收CO₂性能良好的硅酸锂材料，在CO₂气氛下，于700 ℃保持约15 min即可达到吸收平衡，其吸收量约达43%(wt)左右。与文献报道相比，材料的合成条件有所改善，材料吸收CO₂的容量也有较大提高。     

The intercalation of cetyltrimethylammonium cations into muscovite by a two-step process: II. The intercalation of cetyltrimethylammonium cations into Li-muscovite

The alkylammonium cations were successively intercalated into the interlayer of muscovite. It was achieved by inorganic-organic ion exchange in the hydrothermal reaction of the LiNO₃-treated muscovite with cetyltrimethylammonium bromide solution. One-dimensional Patterson plots and electron density calculations show that hydrated Li⁺ and CTA⁺ cations entered the interlayer of muscovite successively. The CTA⁺-intercalated muscovite was characterized by powder X-ray diffraction and elemental analysis, in conjunction with FTIR, nuclear magnetic resonance, X-ray photoelectron spectra, high-resolution transmission electron microscopy, etc. The experiments show that organo-muscovite composite with ordered structure has been obtained. The CTA⁺ headgroups are distributed in the interlayer uniformly. However, the arrangement and conformation of CTA⁺ chains are strongly dependent upon the reaction temperature. At lower reaction temperature, the chains of CTA⁺ ions adopt a little more disordered arrangement and have higher gauche/trans conformer ratio, resulting in the disturbance to the interlayer symmetry. Whereas at higher reaction temperature, the sample with paraffin-like arrangement of CTA⁺ chains could be obtained, in which the methylene chains of CTA⁺ adopt a fully stretched, all-trans conformation.     

低温和低压下水热合成Na4Zr2(SiO4)3

以ZrOCl_2·8H_2O,Na_2SiO_3·9H_2O和NaOH为原料,在250℃约100bar的条件下,水热晶化合成出Na_4Zr_2(SiO_4)_3,并生长相应的单晶。讨论了水热反应及其条件.产物借助于XRD,Raman,~(29)Si MAS NMR以及阻抗谱技术进行了研究.结果表明产物具有与其他方法制备的Na_4Zr_2(SiO_4)_3相同的性质.     

Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

Single Crystals of NaPrTe2 with LiTiO2‐Type Structure

During attempts to synthesize rare‐earth nitride tellurides black and bead‐shaped single crystals of the title compound sodium praseodymium(III) ditelluride (NaPrTe₂) were obtained as a by‐product by reacting a mixture of praseodymium, sodium azide (NaN₃) and tellurium at 900 °C for seven days in evacuated torch‐sealed silica vessels. NaPrTe₂ crystallizes cubic (space group: Fd3¯m, Z = 16; a = 1285.51(9) pm, V_m = 79.96(1) cm³/mol, R₁ = 0.028 for 146 unique reflections) and exhibits the Na⁺ and Pr³⁺ cations in slightly distorted octahedra of six telluride anions (d(Na—Te) = 325 pm, d(Pr—Te) = 317 pm) each. The main characteristics of this new structure type for alkali‐metal rare‐earth(III) dichalcogenides can be derived from the rock‐salt type structure (NaCl, cubic closest‐packed Te^2— arrangement, all octahedral voids occupied with Na⁺ and Pr³⁺) with alternating layers consisting of Na⁺ and Pr³⁺ cations in a ratio of 3:1 and 1:3, respectively, piled along the [111] direction.