海藻酸钠/水性聚氨酯共混膜的结构表征和性能测试

本文将海藻酸钠与聚酯型水性聚氨酯共混制膜，并通过红外光谱（FTIR）、X射线衍射（XRD）、扫描电镜（SEM）、紫外光谱（UV）、力学性能测试对共混膜的结构和性能进行了表征与测试。结果表明，共混膜中两种分子间存在着强烈的相互作用和良好的相容性，与纯海藻酸钠膜相比共混膜有较高的抗水性和断裂伸长率。     

钠原子激光增强电离光谱研究——以石墨杯为原子化器

本文介绍了用石墨杯作为原子化器,对钠原子进行了激光增强电离光谱研究。观察了诸因素对信号强度的影响。绘制了钠的标准曲线,含量范围为5×10~(-9)g—2×10~(-7)g。当钠为5×10~(-3)g时,相对标准偏差为18.5％。     

碱金属和氯离子对Mn_2O_3－Na_2WO_4／SiO_2催化剂甲烷氧化偶联反

本文考察了碱金属和氯离子对Ｍｎ２Ｏ３－Ｎａ２ＷＯ４／ＳｉＯ２催化剂甲烷氧化偶联反应性能的影响，结果表明，只有在氯离子和碱金属的共同作用下才能有效地提高Ｃ２烃的收率及其选择性．催化剂经ＮａＣｌ改性后，Ｃ２烃收率为２２％，并可获较高的烯烷比．在考察范围内增加接触时间（Ｗ／Ｆ），催化剂选择性保持不变，但乙烯的选择性呈上升趋势．钠盐Ｎａ２ＷＯ４、Ｎａ４Ｐ２Ｏ７、Ｎａ２ＳＯ４、Ｎａ２ＣＯ３及Ｎａ２Ｂ４Ｏ７对稳定催化剂的贡献按上述顺序逐渐减小．对ＮａＣｌ－Ｍｎ２Ｏ３－Ｎａ２ＷＯ４／ＳｉＯ２催化剂进行了稳定性考察，使用ＸＰＳ、ＸＲＤ和红外光谱对经历不同反应时间的催化剂进行了表征．     

Conformational analysis of 12-crown-3 and sodium ion selectivity of electrodes based on bis(12-crown-3) derivatives with malonate spacers

A conformational analysis was performed on two crown ethers (12-crown-3 and 12-crown-4) using a combination of semi-empirical and ab initio methods. The lowest conformations of 12-crown-3 and 12-crown-4 were found to have exodentate C_3v and C₂ structure, respectively. In the case of the sandwich-type complexation, the nucleophilic cavity of 12-crown-3 rather than that of 12-crown-4 seemed to be optimal for complexation with the Na⁺ ion. Four new bis(12-crown-3) derivatives (1–4) were examined as potential sodium ion-selective ionophores in poly(vinylchloride) (PVC) membrane electrodes. The ion-selective electrode (ISE) based on di(1,5,9-trioxacyclododecanylmethyl) 2-dodecyl-2-methylmalonate (1) had the highest selectivity for the sodium ion among the alkali and alkaline earths studied. The sodium ion selectivity of the ISE based on bis(12-crown-3) derivative 1 was superior to that of the ISE based on the bis(12-crown-4) analogue.     

Peculiarities of optically stimulated luminescence in halite

Sodium chloride – NaCl is one of materials indicating strong OSL signal after exposure on ionizing radiation. Previous studies of the OSL response in pure sodium chloride showed coexistence of fading and regeneration of the signal using the newly developed variable delay optically stimulated luminescence technique (VD-OSL). This paper presents investigations of some peculiarities of long time scale OSL properties of rock salt (halite) including sensitization phenomena for various bleaching methods. Dose response characteristics were studied in the range from 200 mGy to 1 Gy for series of halite aliquots without signal bleaching and for single aliquot using zeroing by blue and green light.     

Simultaneous determination of eleven amphenicols and antiviral drugs in aquatic products by ultra-high performance liquid chromatography-tandem mass spectrometry coupled with PRIME HLB solid phase extractionEI北大核心CSCD

An efficient ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was established for the simultaneous determination of 11 amphenicols and antiviral drugs in aquatic products including fish, shrimp, soft-shell turtle and shellfish samples. Each sample was dispersed with 4%(w/w)sodium chloride solution, and extracted with 2%(V/V) ammonia-ethyl acetate solution. After the concentration of the extract, the residue was redissolved in 0.2%(V/V) aqueous solution of formic acid-acetonitrile (20∶80, V∶V), purified with Oasis PRIME HLB cartridge, and detected by UPLC-MS/MS. The samples were analyzed directly on the ZORBAX RRHD Eclipse Plus C18 column using 5 mmol/L ammonium formate and acetonitrile as mobile phase. The quantitative determination of the analytes was carried out under the multiple reaction monitoring mode with positive and negative electrospray ionization using internal standard method. Results showed that there were good linear relationships for all analytes in the corresponding concentration ranges, with the correlation coefficients not less than 0.996. The limits of quantification ranged from 0.2 to 2.0 µg/kg. The average spiked recoveries were between 84.6% and 110% with the relative standard deviations of 1.0% to 14%. The method, which has been used in risk monitoring, is suitable for rapid determination of amphenicols and antiviral drugs in aquatic products. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

A viscometric study of tuning micellar morphology by organic additives

The micellar morphology in aqueous 0.2 M sodium dodecyl sulfate (SDS) solutions has been studied in the simultaneous presence of organic salts (anilinium hydrochloride, AHC; ortho-toluidine hydrochloride, oTHC; para-toluidine hydrochloride, pTHC) and aliphatic alcohols (n-butanol, C₄OH; n-pentanol, C₅OH; n-hexanol, C₆OH; n-heptanol, C₇OH), aliphatic amines (n-butylamine, C₄NH₂; n-pentylamine, C₅NH₂; n-hexylamine, C₆NH₂; n-heptylamine, C₇NH₂), or hydrocarbons (n-hexane, C₆H; n-heptane, C₇H) by viscosity measurements under Newtonian flow conditions at 30 °C. Addition of alcohols and amines causes micellar growth which is found to be dependent upon chain length of the additive and nature of organic salt counterion. It is observed that amines are more effective in increasing the viscosity of the system if added in pure 0.2 M SDS solution, while SDS + pTHC system was found versatile when alcohols were added to this system. The increased viscosity or the micellar growth is explained in terms of the site of solubilization of the respective additive and the interaction of the additive with micellar surface and salt counterion present in the head group region. Hydrocarbons are nearly ineffective in inducing micellar growth and can be used as ‘micellar destroyer’ for the grown micelles. The additives used are found effective in tuning the environment of the micelle which is reflected in viscosity behavior. This work may find use in micellar ultrafiltration as well as in mimicking the natural cell, which has several aspects common with the micelle.     

On the influence of some strong electrolytes on the partitioning of acetic acid to aqueous/organic two-phase systems in the presence of tri-n-octylamine: Part II: Toluene as organic solvent

Water-insoluble amines (dissolved in an organic solvent/organic solvent mixture) are often used for the extractive recovery of carboxylic acids from aqueous phases. The basic design of the extraction process requires a thermodynamic framework that should be able to describe the liquid–liquid phase equilibrium not only in the phase forming systems (water + carboxylic acid + organic solvent + reactive extractant), but also when the aqueous feed phase contains additionally small amounts of strong electrolytes. Even small amounts of strong electrolytes might considerably reduce the recovery rate. In part I of this series such a model was presented and discussed for methyl isobutyl ketone as organic solvent and tri-n-octylamine (TnOA) as the chemical extractant. The present part II is to demonstrate that the procedures/methods described for methyl isobutyl ketone as organic solvent can be applied also for other organic solvents. By way of example, here toluene is that organic solvent. New experimental results are reported for the influence of sodium chloride, sodium nitrate, sodium sulfate, sodium acetate and hydrochloric acid on the partitioning of acetic acid to coexisting aqueous/organic liquid phases of the system (water + toluene + tri-n-octylamine) at 25 °C. An extension/adaptation of the previously published thermodynamic framework is successfully applied to describe/predict the new experimental liquid–liquid phase equilibrium data.     

Studies of the association of chitosan and alkylated chitosan with oppositely charged sodium dodecyl sulfate

Cationic biopolymer chitosan has many applications in food, cosmetic and pharmaceutical industries. Grafting alkylated chains on its backbone can hydrophobically modify this water-soluble polymer.This paper concerns unmodified chitosan, alkylated chitosan and their interactions with a model anionic surfactant, sodium dodecyl sulfate (SDS). The solvent is pH 4 acetic acid solution. The purpose of this study is to highlight the hydrophobicity brought by the alkylated chains by comparing surface tension measurements and rheological properties of hydrophobically modified polymer (HMP) and chitosan solutions at 25 °C.Interactions of chitosan and HMP with surfactant have also been investigated giving information about surface activity and electrical conductivity of such systems. It results that alkylated chitosan/SDS system is more surface active than chitosan/SDS and it offers new potential applications in pharmaceutical and cosmetic fields because of the formation of amphiphilic complexes.     

In vitro response of hFOB cells to pamidronate modified sodium silicate coated cellulose scaffolds

The aim of the present study was to evaluate the suitability of cellulose-based scaffolds coated with pure sodium silicate gel and sodium silicate gels accumulated with different concentrations of the bisphosphonate pamidronate as scaffolds for attachment, proliferation and differentiation of human fetal osteoblasts (hFOB 1.19). Human osteoblasts were cultured in vitro for a period up to 14 days on different cellulose scaffolds. Unmodified and sodium silicate coated cellulose scaffolds were used as control. Two surface-coated modifications of cellulose were applied. The scaffolds were coated in a modified two-step dip coating process with pure sodium silicate gel and pamidronate enriched sodium silicate gel, respectively. In order to investigate the influence of the pamidronate, concentrations of 0.667 mg Na-pamidronate/ml sodium silicate solution, 0.333 mg Na-pamidronate/ml sodium silicate solution and 3.33 x 10(-3) mg Na-pamidronate/ml sodium silicate solution were used for the coating process. Cell proliferation, vitality and attachment were examined by means of cell counting, WST-1 test, fluorescence and scanning electron microscopy. The relative grade of differentiation of hFOB cells was examined by using quantitative real-time polymerase chain reaction (qRT-PCR) analysis for the gene expression of alkaline phosphatase and osteocalcin. Proliferation and differentiation of human osteoblasts was enhanced by the sodium silicate coatings accumulated with pamidronate compared to pure sodium silicate coatings. There was a reciprocal correlation of vitality with the concentration of pamidronate. The highest vitality was found on surfaces with the lowest pamidronate accumulation. Alkaline phosphatase, an early differentiation marker, was overexpressed after 7 days in cells on all pamidronate-containing surfaces (up to 350% compared to untreated cellulose). Osteocalcin, a late differentiation marker, was overexpressed after 14 days in cells on all coated surfaces (up to 300,000% compared to untreated cellulose). The results indicate that due to the modified coating procedure a homogeneous coating and thus, an enhancement of cell attachment and subsequent cellular functions can be achieved. Low concentrations of pamidronate seem to have a relevant effect on cell proliferation and vitality and, therefore, can be recommended for the improvement of the properties of a biomaterial.