谷氨酸钠从其水溶液中的周期结晶现象

早在本世纪初物理化学家们就已观察到，某些物质从其熔融态或溶液中结晶出来时，在某些条件下可形成周期性的宏观结晶条纹［1，2］，这就是周期结晶现象，由于这种现象和晶体生长、材料物性以及成矿过程等重要问题紧密相关，很早就引起了人们的重视．近年来有关非平衡非线性系统中自发产生各种时空有序现象（自组织现象）的各种理论（如耗散结构理论）［3］的兴起，重新引起了人们对这类现象的兴趣．八十年代，Iwamoto等先后报道了甲基苄基氨基甲酸酯（MethylMesitylcarbamate）从氯仿溶液［4］和抗坏血酸（AscorbicAcid）从甲醇溶液［5］…     

Thermodynamics of multicomponent electrolyte solutions: Aqueous mixtures of two salts from among NaCl,KCl, NaH2PO4, and KH2PO4 at 25° C

Five of the six possible aqueous two-salt mixtures from among NaCl, KCl, NaH₂PO₄,and KH₂PO₄ have been studied by the isopiestic method at 25°C. The sixth mixture, NaCl–KCl, has been studied previously. The deviations from ideal mixing behavior are described by a series of coefficients which were found by regression analysis. The coefficients were used to calculate the excess Gibbs energies of mixing for equal ionic strength fractions of each salt and the trace activity coefficient of each salt at an ionic strength of 2 mode-kg^–1. The cross-square mixing rule is obeyed within experimental uncertainty for the excess Gibbs energies of mixing.     

Morphology, crystallization behavior and properties of impact-modified polypropylene copolymer with or without sodium benzoate as a nucleating agent

 The morphology, crystallization behavior, and properties of an impact-modified polypropylene (PP) copolymer with or without sodium benzoate were investigated. The contents of ethylene–propylene rubber (EPR) in the reactor-made PP copolymer is about 15 wt%. For comparison, blends of PP and EPR containing the same EPR composition were prepared by melt-mixing. Morphological studies by scanning probe microscopy indicated that the impact-modified copolymer consists of three different phases, i.e., polyethylene, PP, and EPR phases, which is considerably different from the morphology of the conventional PP/EPR blend of the corresponding composition. The impact-modified PP copolymer exhibited a higher crystallization rate in terms of the lower crystallization half-time and thus higher thermal and mechanical properties, such as impact strength and hardness, than the PP/EPR blend did. The addition of sodium benzoate as a nucleating agent to the copolymer increased the crystallization rate and the mechanical properties. Received: 4 June 2001 Accepted: 31 October 2001     

Natriumkomplexe mit Salicylideniminen: Synthesen,Strukturen, CO2‐Aufnahme und Carboxylierung von 2‐Fluorpropiophenon bzw. Estronmethylether

Chiral salicylidenphenethylamines (R)‐HA or (S)‐HA , 2‐salicylidenfurfuryl‐imines HB , and 2‐salicylidenaminoethanol HC react with sodium hydride or sodium hexamethyldisilylamide to form the sodium complexes [Na(R)‐A] ₄ · 0,5 Et ₂ , [Na(S)‐A] ₄ · 0,5 Et ₂ O (1) , [NaB] ₄ · 0,5 Ph‐Me (2) and [(dme)NaC] ₄ (3) . In the presence of 18‐crown‐6 the complex [Na(18‐crown‐6)(thf) ₂ ] ₂ [Na ₂ (C)] ₄ · THF (4) can also be isolated. The crystal structure analyses of both 1 and 2 show that heterocubane structures with a Na₄O₄ frame work are formed. Additionally, the imine nitrogen atom is bonded at the Na atom which has the coordination number 4 in 1 . Additional coordination of the furfuryl oxygen atom results in the coordination number five for the sodium atom in 2 . In 3 which is also a tetramer, two Na₂O₂ units are connected via two imino‐ethanol bridges Na(1)‐N(=CH‐phenolat)‐CH₂CH₂‐OH‐Na(2A). The crystal structure analysis displays that 4 is an ionic compound consisting of two [(thf)₂Na(18‐crown‐6)]⁺ cations and the dinuclear dianion [Na ₂ (C) ₄ ] ^2? . Both 1 and 2 are carboxylation reagents which transfer CO₂ to 2‐fluoropropiophenone. 1 is more active than 2 , but 3 and 4 are inactive.     

Interaction of sodium cholate with dioctadecyldimethylammonium chloride vesicles in aqueous dispersion

Mixtures of dioctadecyldimethylammonium chloride (DODAC) cationic vesicle dispersions with aqueous micelle solutions of the anionic sodium cholate (NaC) were investigated by differential scanning calorimetry, DSC, turbidity and light scattering. Within the concentration range investigated (constant 1.0 mM DODAC and varying NaC concentration up to 4 mM), vesicle → micelle → aggregate transitions were observed. The turbidity of DODAC/NaC/water depends on time and NaC/DODAB molar concentration ratio R. At equilibrium, turbidity initially decreases smoothly with R to a low value (owing to the vesicle–micelle transition) when R = 0.5–0.8 and then increases steeply to a high value (owing to the micelle–aggregate transition) when R = 0.9–1.0. DSC thermograms exhibit a single and sharp endothermic peak at T_m ≈ 49 °C, characteristic of the melting temperature of neat DODAC vesicles in water. Upon addition of NaC, T_m initially decreases to vanish around R = 0.5, and the main transition peak broadens as R increases. For R > 1.0 two new (endo- and exothermic) peaks appear at lower temperatures indicating the formation of large aggregates since the dispersion is turbid. All samples are non-birefringent. Dynamic light scattering (DLS) data indicate that both DODAC and DODAC/NaC dispersions are highly polydisperse, and that the mean size of the aggregates tends to decrease as R increases.     

Alkali Cation Ligating Chains and Sheets of the Macrocycle 1, 7‐Dithia‐18‐Crown‐6 with Bridging Iodo‐ and Thiocyanatocuprate(I) Units

Treatment of an acetonitrile solution of CuI with 1, 7‐dithia‐18‐crown‐6 (1, 7‐DT18C6) at 100°C affords the coordination polymer ¹[(CuI)₂(1, 7‐DT18C6)₂] ( 1 ) in which 1, 7‐DT18C6 ligands bridge (CuI)₂ rings into double chains. 1D polymers of the type ¹[M{(Cu₃I₄)(1, 7‐DT18C6)}] (M = K, 2 ; M = Cs, 3 ) can be isolated under similar conditions in the presence of respectively KI and CsI. Both contain bridging heptacyclic [Cu₆I₈]^2— units but crystallise in different space groups, namely P1 and C2/m. The cesium cation of 3 is markedly displaced from the best plane through the thiacrown ether donor atoms. Reaction of 1, 7‐DT18C6 with CuSCN in the presence of NaSCN yields ²[{Na(CH₃CN)₂} {(CuSCN)₂(1, 7‐DT18C6)}][Cu(SCN)₂] ( 4 ), in which ¹[(CuSCN)₂] double chains are linked through macrocycles into sheets. Infinite ¹[{Cu(SCN)₂}^—] chains compensate the charge of the Na⁺ cations. Complex 1 can imbibe 0.90 mol CsNO₃ per mol of 1, 7‐DT18C6 pairs.     

几种光敏剂光敏氧化效率的比较

<正> 光敏氧化效率是由敏化剂分子吸收光量子数及其产生单重态氧的量子产率决定的,这要求敏化剂的吸收光谱同光源的发射光谱很好地匹配。本文报道竹红菌甲素匹配高压钠灯有效地产生单重态氧,高效光敏氧化一系列具有不同反应活性的底物,成为单重态氧化学中一个新的光敏氧化体系。     

Determination of butyl- and phenyltin compounds in biological material by gas chromatography-flame photometric detection after ethylation with sodium tetraethylborate

A reliable and rapid speciation method for the simultaneous determination of butyl- and phenyltin species in biological samples has been developed. Three extraction procedures are compared: enzymatic hydrolysis and solubilization by ethanoic and hydrochloric acids. Derivatization is performed by the one-step ethylation/extraction procedure using the sodium tetraethylborate reagent directly in the aqueous phase in the presence of an isooctane layer. Analysis is performed using capillary gas chromatography coupled to flame photometric detection. The detection limits are in the range of a few ng(Sn)/g. Analysis of the environmental samples and the certified reference material demonstrates the accuracy of the analytical method.     

Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.     

FI－ICP－AES在线稀释间接测定表面活性剂─十二烷基苯磺酸钠

基于十二烷基苯磺酸钠（ＤＢＳ）与无机钠盐在无水乙醇中溶解度的差异，用乙醇选择提取ＤＢＳ，经水适当稀释，通过用ＦＩ－ＩＣＰ－ＡＥＳ测定其中的钠，从而间接测定ＤＢＳ的含量。