Oxidative Coupling of Thiols to Disulfides with Ti(IV) in the Presence of NaI under Air Atmosphere

Ti(IV) as TiCl₃(O₃SCF₃) and TiO(O₂CCF₃)₂ are used as efficient catalysts for oxidative coupling of aliphatic, aromatic and heteroaromatic thiols to their disulfides in the presence of NaI under air atmosphere.     

环丙沙星在胶束体系中的荧光特性研究及应用

研究了环丙沙星在胶束体系中的荧光性质，发现十二烷基硫基酸对环丙沙星有较强的增敏作用。据此建立了胶束增敏荧光光谱法测定痕量环丙沙星的新方法，经样品测定，其线性范围为0．033－0．60μg.mL^-1，检出限为0．033μg.mL^-1，回收率为94．0％－98．1％相对标准偏差为1．5％－2．8％。     

A New Flow Instrument for Conductance Measurements at Elevated Temperatures and Pressures: Measurements on NaCl(aq) to 458 K and 1.4 MPa

A new flow electrical conductance instrument was constructed and tested on dilute NaCl solutions up to 458 K, and on more concentrated solutions (maximum 0.436 mol⋅kg⁻¹) at 373 K. The results of the new instrument agreed with those of previous authors within the estimated experimental errors. The model of Bernard et al. (J. Phys. Chem. 96, 3833–3840 (1992), MSA) was found to represent the high-temperature results without introducing an ion-pairing equilibrium constant. The Fuoss–Hsia conductance equation as given by Fernandez-Prini was found to represent the dilute concentrations with Λ° (NaCl) as the only adjustable parameter. It was found that Λ° (NaCl) could be expressed as a function of solvent viscosity and density by using three parameters found by regression of literature results between 278.15 and 523 K. This equation along with the FHFP theory permits the equivalent conductivity of dilute sodium chloride solutions to be calculated within the accuracy of the existing experimental measurements.     

气相色谱-质谱联用法测定维生素C泡腾片中的甜蜜素

采用气相色谱-质谱(GC-MS)选择离子监测法(SIM),建立了准确可靠、灵敏度高、快速简便的测定维生素C泡腾片中甜蜜素含量的新方法.样品中的甜蜜素衍生后用有机试剂提取,在选择离子模式下进行测定,以保留时间和特征离子比例进行定性,单离子定量.甜蜜素的线性范围为0.05-10mg/L,检出限为0.6mg/kg,回收率为90.5%-96.9%,相对标准偏差小于4.4%.方法分析所用时间短,结果准确可靠,选择性好,适用于维生素C泡腾片中甜蜜素含量的检验.     

Synthesis of biodegradable copolymers with low‐toxicity zirconium compounds. V. Multiblock and random copolymers of L‐lactide with trimethylene carbonate obtained in copolymerizations initiated with zirconium(IV) acetylacetonate

Using zirconium(IV) acetylacetonate as an initiator of lactide/trimethylene carbonate copolymerization allowed us to obtain high‐molecular‐weight copolymers with high efficiency. The reactivity ratios of the comonomers were 13.0 for lactide and 0.53 for trimethylene carbonate. Despite the large differences between the values of the reactivity ratios, copolymers with randomized chain structures were obtained. This phenomenon occurred as a result of an intensive intermolecular transesterification process proceeding along with the reaction of copolymer chain growth and modifying its final structure. Conducting the copolymerization at the relatively low temperature of about 110 °C, which minimized the influence of intermolecular transesterification, made it possible to obtain semicrystalline copolymers with multiblock structures. Increasing the temperature of copolymerization up to 180 °C was associated with strong intensification of the transesterification reactions. At this temperature, amorphous copolymers were obtained with identical compositions but highly randomized chain structures. An analysis of the chain microstructures of the obtained copolymers, determining the average length of the blocks, the intermolecular transesterification ratio, and the degree of chain randomization, was conducted by means of NMR spectroscopy. For this purpose, very specific signal assignment in the carbonyl and methylene carbon regions of the ¹³C NMR spectra to appropriate comonomer sequences of polymeric chains was performed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3184–3201, 2006     

Synthesis of biodegradable copolymers with low‐toxicity zirconium compounds. IV. Copolymerization of glycolide with trimethylene carbonate and 2,2‐dimethyltrimethylene carbonate: Microstructure analysis of copolymer chains by high‐resolution nuclear magnetic resonance spectroscopy

The results of the copolymerization of glycolide with cyclic trimethylene carbonate and 2,2‐dimethyltrimethylene carbonate are described. The copolymerization was conducted in the presence of low‐toxicity zirconium(IV) acetylacetonate as an initiator. With this kind of initiator, the composition of the comonomer units in the copolymer chains was assumed to be obtained with high efficiency. Despite significant differences in the comonomer reactivity, in copolymers containing comparable amounts of glycolidyl and carbonate sequences, highly randomized chain structures were observed. This effect resulted from strong intermolecular transesterification that proceeded during the studied copolymerization and caused glycolidyl microblock randomization. The assignment of the spectral NMR lines to appropriate comonomer sequences of polymeric chains was performed in the region of methylene protons of glycolidyl units in ¹H NMR spectra of the copolymers and in the carbonyl region of carbon spectra. The equations were formulated for a detailed characterization of the obtained copolymer chains, the average lengths of the blocks, and the transesterification and randomization coefficients. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 98–114, 2006     

Reinforcement effect of MAA on nano‐CaCo3‐filled EPDM vulcanizates and possible mechanism

Methacrylic acid (MAA) was used as in situ surface modifier to improve the interface interaction between nano‐CaCO₃ particle and ethylene–propylene–diene monomer (EPDM) matrix, and hence the mechanical properties of nano‐CaCO₃‐filled EPDM vulcanizates. The results showed that the incorporation of MAA improved the filler–matrix interaction, which was proved by Fourier transformation infrared spectrometer (FTIR), Kraus equation, crosslink density determination, and scanning electron microscope (SEM). The formation of carboxylate and the participation of MAA in the crosslinking of EPDM indicated the strong filler–matrix interaction from the aspect of chemical reaction. The results of Kraus equation showed that the presence of MAA enhanced the reinforcement extent of nano‐CaCO₃ on EPDM vulcanizates. Crosslink density determination proved the formation of the ionic crosslinks in EPDM vulcanizates with the existence of MAA. The filler particles on tensile fracture were embedded in the matrix and could not be observed obviously, indicating that a strong interfacial interaction between the filler and the matrix had been achieved with the incorporation of MAA. Meanwhile, the presence of MAA remarkably increased the modulus and tensile strength of the vulcanizates, without negative effect on the high elongation at break. Furthermore, the ionic bond was thought to be formed only on filler surface because of the absolute deficiency of MAA, which resulted in the possible structure where filler particles were considered as crosslink points. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1226–1236, 2006     

Phase diagram of Na2S2O3 + ethanol + water at ambient pressure and temperature

In the present communication, we report the studies concerning liquid–liquid–solid equilibria for the ternary system sodium thiosulphate (Na₂S₂O₃) + ethanol + water at ambient pressure and at room temperature (303 ± 2 K). The solubility data of Na₂S₂O₃ are reported for solutions in water, ethanol and solutions of varying concentrations of ethanol in water. The phase diagram for the said system is developed, described and compared with similar system K₂CO₃ + methanol + water. These results have been explained in terms of structural properties of aqueous ethanol solutions and further discussed in terms of the effect of ions to cause phase separation.     

基于褐藻酸钠-纳米金复合物作非酶标记的新型电化学免疫传感器的研制

比较了用三碘甲状腺氨酸抗体(T3抗体)、褐藻酸钠(AS)标记T3抗体及褐藻酸钠-纳米金复合物(ASN)标记的T3抗体,在通过免疫反应结合到免疫电极表面后,引起的电极表面微环境发生改变的程度;用Fe(CN)3-/4-6为电化学探针,用循环伏安法获取金电极表面微环境改变的电流信息来检测 T3抗体,检测的线性范围为100～1 600ng·ml-1,检出限为45ng·ml-1.