覆膜长周期光纤光栅在生化分析中的应用及研究进展

总结了纳米薄膜修饰的长周期光纤光栅在折射率生物传感器方面的研究进展,重点介绍了纳米薄膜对长周期光纤光栅折射率传感性能的影响,详细阐述了覆膜长周期光纤光栅在生化分析检测领域的应用,并对其在折射率传感方面的应用前景作了展望。     

Theory of noise in a kilo-Hz cascaded high-energy Yb-doped nanosecond pulsed fiber amplifier

A theoretical analysis of noise in a high-power cascaded fiber amplifier is presented. Unlike the noise theory in low power communication, the noise of a high power system is redefined as the leaked output energy between pulses with coherent beat noise uncounted. This definition is more appropriate for high power usage in which the pulse energy receives more attention than the pulse shape integrity. Then the low power pre-amplifying stages are considered as linear amplification and analyzed by linear theory. In the high-power amplification stages, the inversion is assumed to recover linearly in the time interval between pulses. The time shape of the output pulse is different from that of the input signal because of different gains at the front and back ends of the pulse. Then, a criterion is provided to distinguish the nonlinear and linear amplifications based on the signal-to-noise ratio （SNR） analysis. Then, an experiment that shows that the output SNR actually drops off in nonlinear amplification is performed. The change in the noise factor can be well evaluated by pulse shape distortion.     

板条Nd:YAG晶体的合成盘抛光技术

针对高功率板条激光器核心工作器件——板条Nd:YAG晶体的超精密加工开展研究,分析了具有特殊构型的板条Nd:YAG晶体元件的加工性能及工艺难点,提出了一种新的基于合成盘抛光的板条Nd:YAG晶体加工工艺,并对规格为100mm×30mm×3mm的板条Nd:YAG晶体进行了加工实验。实验结果表明,合成盘抛光可以很好地控制元件的塌边现象;通过磨料的优化选择,在合成盘抛光工艺中匹配合适粒度的Al2O3磨料能够实现元件的低缺陷加工,元件下盘后的全反射面平面度达0.217λ(1λ=632.8nm),端面平面度达到0.06λ,表面粗糙度达0.55nm(RMS),端面楔角精度可达2″。     

掺镱石英光纤预制棒的制备与表征

采用改进化学汽相沉积结合溶液掺杂法制备了掺镱石英光纤预制棒,并研究了不同镱掺杂浓度下的吸收光谱和发光光谱.吸收光谱和发光光谱的强度随着YbCl₃溶液浓度的增大而增强.在不产生失透的前提下,得到预制棒芯层能够掺杂的YbCl₃溶液最大浓度为0.057 mol/L.     

基于椭圆孔包层和微型双孔纤芯的新型高双折射光子晶体光纤

设计了一种新型高双折射光子晶体光纤,即其包层引入椭圆形空气孔,且以三角晶格方式周期排列,纤芯引入亚波长尺寸(~0.16 μm)的微型双孔结构阵列.采用全矢量有限元法和各向异性完美匹配层边界条件分析了该型光子晶体光纤的双折射特性和色散特性,详细介绍了该光子晶体光纤在不同的椭圆率、椭圆归一化面积、微型双孔孔径、两小孔之间间距的情况下双折射和限制损耗随波长的变化曲线.模拟结果表明,通过同时在包层和纤芯引入非对称性,获得了较高的双折射(~10^-3量级)和极低(~10^-4 dB/km)的限制损耗.提供了一种新的光子晶体光纤设计方法,即通过同时在包层和纤芯引入新结构来同时获得高双折射和低损耗.     

227-W output all-fiberized Tm-doped fiber laser at 1908 nm

In this paper, we report that a diode-pumped thulium-doped double clad silica fiber laser can provide powers of up to 227 W at 1908 nm, corresponding to a slope efficiency of 54.3%, and an optical-to-optical efficiency of 51.2%. The output power, to the best of our knowledge, is the highest output at 1908 nm. The beam quality M2 factor is about 1.56. Also discussed in this paper is the dependence of the laser performance on fiber length.     

测量熔融金属密度的浮子式光纤Bragg光栅传感器

密度可以解释熔融金属的性质和行为,密度的变化特征反映了熔融金属内部原子距离和配位数等的基本变化。研制了一种测量熔融金属密度的浮子式光纤Bragg光栅传感器,浸没在熔融金属中的浮子受浮力作用,通过传递杆、等臂杠杆及连杆,拉动等强度悬臂梁产生扰度变化,根据检测粘贴在等强度悬臂梁表面的光纤Bragg光栅中心波长移位值,测出浮力值,进而检测熔融金属密度。该传感器的理论灵敏度为0.115pm/(kg/m3),4次实验得到熔融金属的平均密度为7.574×103 kg/m3,略小于理论密度7.621×103kg/m3,相对误差为0.62,均方根误差为117.371kg/m3。     

Optimization of photonic bandgap fiber long period grating refractive-index sensors

Long period gratings in low-index contrast solid-core photonic bandgap fibers are a promising platform for fiber-based fluid refractive index sensing with very low detection limits. We provide a comprehensive investigation of the possibilities for refractive index sensing using that principle in a commercial photonic crystal fiber filled with a fluid: using an acoustic grating, we map out the cladding bands, and use this data to optimize a long period grating’s sensitivity. We then implement the optimized long period grating, again using an acoustic grating, and directly measure its sensitivity to refractive index. We demonstrate a sensitivity of 17,900 nm/RIU (6.94 nm/°C) which corresponds to a smallest detectable index change of the fluid of 8.4 × 10⁻⁶.     

基于光纤光栅的输油管道安全监测系统

针对穿插于滑坡体内的输油管道,提出一种基于光纤光栅传感的管道安全监测系统。系统由光开关和光纤光栅解调仪共同完成数据的自动测量和存储,并利用GPRS方式进行数据传输。利用已知管道上三点应力求最大应力的方法,选用自行研制的光纤光栅传感器监测管体应力。该传感器除了具有抗电磁干扰、耐腐蚀、稳定性好的优点,还可以实现温度补偿,不但排除了温度对测量结果的影响,还可以测量环境温度。经实际应用证明：该监测系统可实现实时监测,性能稳定。     

长周期光纤光栅折射率特性仿真的新方法

基于长周期光纤光栅的模式耦合机理,提出一种快速模拟长周期光纤光栅折射率特性的方法。该方法在计算包层模式的有效折射率时分开计算,在环境折射率小于包层折射率时采用二分法和分步搜索法结合计算包层模式的有效折射率,在环境折射率大于包层折射率时采用Nelder-Mead加分步搜索法求解包层模式的有效折射率。在应用谐振波长的决定式求解与环境折射率的匹配的谐振波长时,采用变区间应用二分法求解而不是传统的逐步搜索法求解谐振波长。数值结果与实验结果做了对比,两者基本一致。实践证明,该方法方便快捷,比一般的方法速度提高7倍以上。